Effects of Neodymium Concentration on Optical Characteristics of Polycrystalline Nd:YAG Laser Materials

A neodymium-doped yttrium-aluminum garnet (Y₃A1₅O₁₂, YAG) (Nd:YAG) ceramic that contained 0.3–4.8 at.% neodymium additives and exhibited nearly the same optical properties as those of a single crystal was fabricated by a solid-state reaction method using high-purity powders. Although the integrated absorption intensity of the ²H_9/2+⁴F_5/2 bands simply increased as the neodymium concentration in the YAG ceramics decreased, the fluorescence intensity of the 2.4 at.% Nd:YAG ceramic was the strongest among Nd:YAG ceramics with various neodymium concentrations and a 0.9 at.% Nd:YAG single crystal. An oscillation experiment was performed on a continuous-wave (cw) laser with a diode-laser exciting system using those ceramics and the single crystal. The oscillation threshold and slope efficiency in that analysis were 309 mW and 28%, respectively, for the 1.1 at.% Nd:YAG ceramics and 356 mW and 40%, respectively, for the 2.4 at.% Nd:YAG ceramics. The lasing characteristics of the ceramics in the present work were superior to those of a 0.9 at.% Nd:YAG single crystal that was fabricated by the Czochralski (Cz) method.     

Novel electro-optic properties of epitaxially grown (Pb, La)(Zr, Ti)O3 (PLZT) thin films derived by advanced sol–gel methods

Advanced sol–gel methods using a secondary solvent addition into (Pb, La)(Zr, Ti)O₃ (PLZT) sol–gel solution and a methanol pre-treatment of sapphire substrates are demonstrated. For the secondary solvent addition, the additive affected the crystallinity and electro-optic (EO) property of PLZT films and only methanol addition can improve them. In addition, the methanol pre-treatment is also appeared to be effective to improve film characteristics.

Through these optimizations, epitaxially grown PLZT thin films on r-cut sapphire are obtained and a high Pockels coefficient which is comparable to those of bulk PLZTs is achieved. It is believed that these PLZT thin films are applicable for integrated EO devices and open the door for the future data communication systems.     

Stability,cure properties,and applicability as one part adhesives of systems of divalent metal salts of mono(hydroxyethyl) phthalate–anhydride–bisepoxide

Heterogeneous curable compositions of divalent metal salts of mono(hydroxyethyl) phthalate–anhydride–bisphenol A diglycidyl ether (BADG) systems were prepared by merely mixing these components at room temperature. Stability at room temperature and cure properties at high temperature of the compositions were investigated for evaluating their applicability as one part adhesive. It was found that the systems containing Mg were generally more stable than those containing Ca. Similarly, at 150°C the Ca-containing systems showed generally shorter gelation time than the Mg-containing ones, due to the fact that the Ca salt dissolves more rapidly and enters into the addition reaction with the anhydride, leading to the faster appearance of the catalytic activities of the Ca carboxylate group. Among the various combinations of components, the metal salt–succinic anhydride (SA)–BADG systems were stable at room temperature for more than 6 months and rapidly cured at high temperature, showing excellent adhesive properties. This result indicates that the SA-containing systems should be of interest in applications to one part adhesives.     

Involvement of brain serotonergic function in lidocaine-induced convulsions in mice

Influences of drug-induced manipulations of central serotonergic function on lidocaine- and pentylenetetrazol (PTZ)-induced convulsions were examined in mice. Agents that suppressed serotonergic transmission increased, whereas drugs that facilitated serotonin (5-HT) function decreased the incidence of lidocaine-induced convulsions. These treatments had similar influences on the incidence of PTZ-induced convulsions. Lidocaine (10(-5)-10(-3) M) reduced the stimulation evoked [3H]5-HT release from cortical slices, followed with an increased spontaneous [3H] overflow at higher concentrations. These results may suggest that brain 5-HT neurons are causally involved as inhibitory neurons in lidocaine-induced convulsions as in the case of PTZ-induced convulsions.     

Investigation into the therapeutic efficacy of continuous isoproterenol inhalation in relation to respiratory infections in asthmatic children

In our Department, continuous isoproterenol inhalation therapy has been conducted on status asthmatics over the last 10 years. In the present study, we investigated whether there are any differences in the therapeutic efficacy of continuous inhalation of isoproterenol in the presence or absence of respiratory infections which may induce or aggravate asthma attacks. The treatment period was significantly longer in patients with pneumonia. Further prolongation of the treatment period was noted in patients with atelectasis. However, there were no apparent differences in therapeutic efficacy according to age or the severity of attacks. These findings suggest that continuous inhalation of isoproterenol is very effective for status asthmatics if respiratory infections are thoroughly controlled.     

Sub-50-nm physical gate length CMOS technology and beyond usingsteep halo

Sub-50-nm CMOS devices are investigated using steep halo and shallow source/drain extensions. By using a high-ramp-rate spike annealing (HRR-SA) process and high-dose halo, 45-nm CMOS devices are fabricated with drive currents of 650 and 300 μA/μm for an off current of less than 10 nA/μm at 1.2 V with T_ox^inv =2.5 nm. For an off current less than 300 nA/μm, 33-nm pMOSFETs have a high drive current of 400 uA/μm. Short-channel effect and reverse short-channel effect are suppressed simultaneously by using the HRR-SA process to activate a source/drain extension (SDE) after forming a deep source/drain (S/D). This process sequence is defined as a reverse-order S/D (R-S/D) formation. By using this formation, 24-nm nMOSFETs are achieved with a high drive current of 800 μA/μm for an off current of less than 300 μA/μm at 1.2 V. This high drive current might be a result of a steep halo structure reducing the spreading resistance of source/drain extensions     

Design optimization of tall tubular lead/acid cells based on an analysis of the reaction distribution

In order to estimate the discharge performance of tall lead/acid cells (with tubular positives), changes in current and potential distributions with discharge progress were calculated with a computer on the basis of plate resistance and the current—potential—time relationship between small facing parts of positive and negative plates. The taller the cell, the larger the voltage drop along the plates. Thus, the discharge time became shorter despite a large amount of available active mass remaining in the bottom part of the plates.Various current-collector designs were evaluated, e.g., one with varying resistance at each height; a side conductor placed along the plates and connected to them at the top, centre and bottom, etc. Results revealed an optimum collector design with which the maximum discharge capacity could be obtained. Furthermore, it was shown that the side conductor markedly improved the discharge performance because the active mass near the connecting parts was appreciably used.     

Spontaneous hemorrhage of an adrenal cortical adenoma causing Cushing''s syndrome

A modified surgical splint for Le Fort I osteotomies with transverse expansion is presented. The splint is made of a transpalatal stainless steel bar with acrylic abutment against the palatal surface of the molar and bicuspid tooth. It is rigid and renders excellent retention. It causes minimal patient discomfort, and oral hygiene is hardly compromised.