Optimization of dynamic response using a monolithic-time formulation

The design of systems for dynamic response may involve constraints that need to be satisfied over an entire time interval or objective functions evaluated over the interval. Efficiently performing the constrained optimization is challenging, since the typical response is implicitly linked to the design variables through a numerical integration of the governing differential equations. Evaluating constraints is costly, as is the determination of sensitivities to variations in the design variables. In this paper, we investigate the application of a temporal spectral element method to the optimization of transient and time-periodic responses of fundamental engineering systems. Through the spectral discretization, the response is computed globally, thereby enabling a more explicit connection between the response and design variables and facilitating the efficient computation of response sensitivities. Furthermore, the response is captured in a higher order manner to increase analysis accuracy. Two applications of the coupling of dynamic response optimization with the temporal spectral element method are demonstrated. The first application, a one-degree-of-freedom, linear, impact absorber, is selected from the auto industry, and tests the ability of the method to treat transient constraints over a large-time interval. The second application, a related mass-spring-damper system, shows how the method can be used to obtain work and amplitude optimal time-periodic control force subject to constraints over a periodic time interval. This research was performed while the first author held a National Research Council Research Associateship Award at the Air Force Research Laboratory. An early version of this paper was presented at the 46th AIAA Aerospace Sciences Meeting and Exhibit, Jan 7–10, 2008, Reno, Nevada.     

Optimal actuation of nonlinear resonant systems

In this study, we examine a new approach for actuation of dynamical systems with minimum work and maximum amplitude while maintaining constraints on the actuation force. Two methodology issues are addressed in the paper: sensitivity analysis about the nonlinear transient response and exploration of the strongly nonlinear relationship between the two objectives and the actuation design variables. The optimization analysis is carried out on lightly damped Duffing systems. The formulation of the optimization problem is found ideally suited to resolve the difficulty of dependence of response on initial conditions. The tradeoff curve of work and amplitude is computed. The optimal actuation strove to compensate for the limited force amplitude by an abrupt change in the force in time. Finally the optimization procedure is demonstrated on the kinematic design of hovering insect flight. The optimal design gives 50% reduction in power consumption, with a larger cutback for an actuation with high acceleration.     

Isolation and characterization of acid-sensitive mutants of Pediococcus acidilactici

Acid-sensitive mutants of Pediococcus acidilactici BCC 9545, a starter culture of the Thai fermented pork sausage nham, were isolated as spontaneous neomycin resistant mutants. The mutants generally produced less acid and acidified the culture media less than the parent strain in a 72 h culturing period. Interestingly, the ATPase activities of the mutants did not differ considerably from that of the parent strain in acidic conditions. It was also found that the internal pH values of the mutant strains were somewhat lower in neutral environment, while at pH 5.0 their internal pHs were significantly lower compared to the parent's. Inhibiting the H⁺-ATPase activities in energized cells by N,N′-dicyclohexyl carbodiimide also revealed that protons were leaking from the mutants at neutral pH, which increased under acidic conditions. In contrast, the parent strain exhibited a smaller proton leak and only under acidic conditions. The membrane fatty acid analysis of the mutants indicated that under acidic conditions the mutants had a significantly smaller major unsaturated/saturated fatty acids ratio ((C_18:1 + C_18:3n6)/(C_16:0 + C_18:0)) compared to the parent strain's membrane. Taken together, these observations suggest there is a reasonable possibility that the membrane fatty acid profile differences in the mutants resulted in their acid-sensitivity.     

Thermal Management Enables Bright and Stable Perovskite Light-Emitting Diodes

The performance of lead-halide perovskite light-emitting diodes (LEDs) has increased rapidly in recent years. However, most reports feature devices operated at relatively small current densities (<500 mA cm⁻²) with moderate radiance (<400 W sr⁻¹ m⁻²). Here, Joule heating and inefficient thermal dissipation are shown to be major obstacles toward high radiance and long lifetime. Several thermal management strategies are proposed in this work, such as doping charge-transport layers, optimizing device geometry, and attaching heat spreaders and sinks. Combining these strategies, high-performance perovskite LEDs are demonstrated with maximum radiance of 2555 W sr⁻¹ m⁻², peak external quantum efficiency (EQE) of 17%, considerably reduced EQE roll-off (EQE > 10% to current densities as high as 2000 mA cm⁻²), and tenfold increase in operational lifetime (when driven at 100 mA cm⁻²). Furthermore, with proper thermal management, a maximum current density of 2.5 kA cm⁻² and an EQE of ≈1% at 1 kA cm⁻² are shown using electrical pulses, which represents an important milestone toward electrically driven perovskite lasers.     

Buried-oxide silicon-on-insulator structures. I. Optical waveguidecharacteristics

For pt.II, see ibid., vol.28, no.1, p.164-75 (1992). Buried-oxide silicon-on-insulator structures are analyzed using both a multilayer transfer matrix approach and a simple approximate method. Results show that these structures can support low-loss leaky modes with substrate leakage losses under 1 dB/cm. Even for a reasonably thick silicon film layer, adjacent modes of the same polarization can have loss discriminations as large as 100 dB/cm. Mode effective indexes obtained from experimental grating transmission measurements taken on waveguides fabricated with the SIMOX process agree with the theoretical analysis     

A Neural Network-Based Trust Management System for Edge Devices in Peer-to-Peer Networks

Edge devices in Internet of Things (IoT) applications can form peers to communicate in peer-to-peer (P2P) networks over P2P protocols. Using P2P networks ensures scalability and removes the need for centralized management. However, due to the open nature of P2P networks, they often suffer from the existence of malicious peers, especially malicious peers that unite in groups to raise each other's ratings. This compromises users' safety and makes them lose their confidence about the files or services they are receiving. To address these challenges, we propose a neural network-based algorithm, which uses the advantages of a machine learning algorithm to identify whether or not a peer is malicious. In this paper, a neural network (NN) was chosen as the machine learning algorithm due to its efficiency in classification. The experiments showed that the NNTrust algorithm is more effective and has a higher potential of reducing the number of invalid files and increasing success rates than other well-known trust management systems.     

Screening alternatives for producing paraffinic phase change materials for thermal energy storage in buildings

Screening alternatives for producing paraffinic phase change materials (PCMs) from natural gas‐based products was investigated. Based on the quality and cost of these PCMs, two sources were identified: (i) hydrogenated gas‐to‐liquid (GTL) products such as heavy detergent feedstocks; and (ii) linear alpha olefins. Fractionation of a typical hydrogenated GTL mixture, containing C₁₄ – C₁₈ alkene and alkane hydrocarbons, has been experimentally conducted to produce five paraffinic PCMs with melting points between 3 and 28 °C. ChemCAD simulation has been proved to be a valid tool for predicting the behaviour of the GTL fractionation, including optimum experimental conditions and compositions of products. Also, hydrogenation of technical 1‐octadecene was experimentally carried out in order to evaluate the quality of PCM produced from one of the available technical alpha‐olefins. All PCMs produced in this work were analysed by gas chromatography equipped with flame ionization detector to determine their compositions and by differential scanning calorimetry to determine their latent heats. The results showed that the PCM with a melting temperature in the range 22 to 25 °C can be technically produced through hydrogenation of commercial 1‐octadecene showing a higher latent heat compared to the PCM produced from fractionation of hydrogenated GTL mixture. Copyright © 2017 John Wiley & Sons, Ltd.     

A Classification of Emerging and Traditional Grid Systems

Advances in grid computing are stimulating the emergence of novel types of grids, such as accessible, manageable, interactive, and personal grids. More and more researchers are realizing emerging grids' potential to bridge the gap between grid technologies and users. This review of emerging grids sets out to develop a comprehensive classification of both traditional and emerging grid systems, with an aim to motivate further research and to help establish a solid foundation in this rapidly developing field.     

A lightweight trust management algorithm based on subjective logic for interconnected cloud computing environments

The Journal of Supercomputing - The interconnected cloud computing paradigm is gaining considerable attention as a fundamental emerging model of cloud computing. It allows a wide range of...     

Optical parametric amplification of femtosecond ultraviolet laser pulses

Broad-band amplification of femtosecond laser pulses using the scheme of noncollinear optical chirped pulse parametric amplification is modeled. The effect of two-photon absorption at the pump wavelength was also taken into account. The signal pulses range from 220 to 410 nm with pump pulses at 267, 248, and 213 nm. The best four crystals chosen among 12 possible ones are BBO, KDP, CLBO, and LB4. In an experiment, 30-fs laser pulses at 400 nm were amplified in a BBO crystal pumped by 267 nm pulses, exhibiting a single pass gain of 3550. The gain was found spectrally flat within the available 17-nm bandwidth of the signal pulse.