A new device for coating single particles under controlled conditions

A new device for coating a single levitated particle in a controllable environment is designed and tested. This enables fluidized bed processing to be simulated experimentally on a single-particle level. The device consists of a coating chamber, which contains a capillary tube for levitating the particle, a micro-dispenser for producing discrete drops of controlled size and velocity and a device for supplying gas with specified temperature and humidity. The coating chamber consists of two parts, a confined space where the particle is levitated and a droplet insertion cone where the coating solution is injected into the particle suspending gas flow. A capillary with a well-defined diameter connects the droplet insertion cone and the area where the particle is levitated. The device is equipped with a piezo-actuated flow-through micro-dispenser that has the ability to produce discrete droplets with high reproducibility in terms of droplet size and velocity. The gas required for the coating process is taken from a gas container where the water content is analysed and kept at a minimum. A liquid flow is then introduced into the gas flow at a well-defined flow rate, mixed and evaporated in a three-way mixing vault. The humidified gas flow is then split into two separate flows; a suspending gas flow and a protecting gas flow for the inside of the coating chamber. The device is equipped with a high-speed video camera for monitoring both droplet production and droplet impact. Temperatures and flow rates throughout the device are measured and logged. Preliminary results show the influence of solvent, gas quality and coating procedure on the quality of the coating.     

Efficient Nd:YAG Laser Frequency Doubling with Periodically Poled KTP

Periodically poled flux-grown KTiOPO(4) was used for efficient extracavity 1064-nm Nd:YAG laser frequency doubling. A conversion efficiency exceeding 65% was obtained in Q-switched operation, and 1.34 W of average frequency-doubled power was generated with 2.2 W of mode-locked laser output. The conversion efficiency is approximately two times higher for periodically poled KTP than for conventional type II phase-matched KTP. The measurements indicate that periodically poled KTP is less susceptible to optical damage than type II KTP.     

Serum Proteomics in Patients with Head and Neck Cancer: Peripheral Blood Immune Response to Treatment

In this real-world study, the aims were to prospectively evaluate the expression of inflammatory proteins in serum collected from head and neck cancer patients before and after treatment, and to assess whether there were differences in expression associated with treatment modalities. The mixed study cohort consisted of 180 patients with head and neck cancer. The most common tumor sites were the oropharynx (n = 81), the oral cavity (n = 53), and the larynx (n = 22). Blood tests for proteomics analysis were carried out before treatment, 7 weeks after the start of treatment, and 3 and 12 months after the termination of treatment. Sera were analyzed for 83 proteins using an immuno-oncology biomarker panel (Olink, Uppsala, Sweden). Patients were divided into four treatment groups: surgery alone (Surg group, n = 24), radiotherapy with or without surgery (RT group, n = 94), radiotherapy with concomitant cisplatin (CRT group, n = 47), and radiotherapy with concomitant targeted therapy (RT Cetux group, n = 15). For the overall cohort, the expression levels of 15 of the 83 proteins changed significantly between the pretreatment sample and the sample taken 7 weeks after the start of treatment. At 7 weeks after the start of treatment, 13 proteins showed lower expression in the CRT group compared to the RT group. The majority of the inflammatory proteins had returned to their pretreatment levels after 12 months. It was clearly demonstrated that cisplatin-based chemoradiation has immunological effects in patients with head and neck cancer. This analysis draws attention to several inflammatory proteins that are of interest for further studies.     

Surface wrinkling: the phenomenon causing bees in bitumen

The so called “bee phenomenon” in bitumen has been investigated by means of AFM quantitative nanomechanical property mapping. Bees are a phenomenon that can be observed by topography measurements using AFM. The characteristic “bee” appearance comes from regions with alternating higher and lower bands in the surface topography of bitumen, which are surrounded by a flat area. The proposed mechanism for bee formation is phase separation and differential contraction during cooling from melt temperatures leading to wrinkling due to differences in the elastic modulus of the material phases. Using a laminate wrinkling model, the thickness of the bee laminate was calculated from the wavelengths and Young’s moduli of the bee laminate and the matrix. It was found to vary between 70 and 140 nm for the five bitumen samples that contained significant amounts of wax.     

Integrated microanalytical technology enabling rapid and automated protein identification

Protein identification through peptide mass mapping by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) has become a standard technique, used in many laboratories around the world. The traditional methodology often includes long incubations (6-24 h) and extensive manual steps. In an effort to address this, an integrated microanalytical platform has been developed for automated identification of proteins. The silicon micromachined analytical tools, i.e., the microchip immobilized enzyme reactor (mu-chip IMER), the piezoelectric microdispenser, and the high-density nanovial target plates, are the cornerstones in the system. The mu-chip IMER provides on-line enzymatic digestion of protein samples (1 microL) within 1-3 min, and the microdispenser enables subsequent on-line picoliter sample preparation in a high-density format. Interfaced to automated MALDI-TOF MS, these tools compose a highly efficient platform that can analyze 100 protein samples in 3.5 h. Kinetic studies on the microreactors are reported as well as the operation of this microanalytical platform for protein identification, wherein lysozyme, myoglobin, ribonuclease A, and cytochrome c have been identified with a high sequence coverage (50-100%).     

A 980-nm Yb-doped fiber MOPA source and its frequency doubling

A continuous-wave (CW) master oscillator-power amplifier (MOPA) fiber source, tunable around 978 nm, was frequency-doubled to 488.7 nm. Both the laser and the amplifier were made with cladding-pumped jacketed air-clad Yb-doped fibers. The MOPA generated up to 2.7 W of power in an output beam with an M/sup 2/ value of 1.8. This was frequency-doubled in a periodically poled potassium titanyl phosphate crystal at room temperature, in a single-pass configuration. The generated blue light had a CW power of 18.1 mW, a nearly Gaussian spatial intensity profile, and an M/sup 2/ value of 1.7.     

Compact all-diode-pumped femtosecond laser source based on chirpedpulse optical parametric amplification in periodically poledKTiOPO4

1 kHz chirped pulse optical parametric amplification in periodically poled KTiOPO₄ achieving 20 μJ amplified signal pulse energy at 1.573 μm and 320 fs pulse duration after recompression is reported     

Stable blue second-harmonic generation in a KTP waveguide with a diode laser in an external cavity

Stable second-harmonic generation from a diode laser, using a quasi-phasematching KTP waveguide and a grating in an external cavity is described. 1.35 mW of blue light was generated and the power fluctuation was less than 0.3%.<>     

Guided tissue regeneration update

The ultimate goal of periodontal therapy is to restore periodontal tissues lost through disease or trauma. The most predictable way to accomplish this goal is by guided tissue regeneration (GTR). The principle of GTR is to give preference to certain cells to repopulate the wound area to form a new attachment apparatus. Clinically this is accomplished by placing a barrier over the defect thereby excluding gingival tissues from the wound during early healing. The first generation of GTR barriers were non-resorbable which implies that they have to be removed in a second surgical procedure. Resorbable barriers have recently been introduced, changing GTR into a single-step procedure. Periodontal defects that will predictably benefit from GTR therapy are intrabony, furcation class II and gingival recession defects. This paper reviews the scientific evidence of what can be achieved by GTR procedures for various periodontal defects as well as factors of importance to increase the predictability of a successful treatment outcome.