Corrosion morphologies on magnesium alloy AZ 91

Initiation and early propagation of pitting and filiform corrosion on bare alloy AZ91 (9% Al, 1% Zn) are investigated by natural immersion corrosion tests, electrochemical measurements and microanalytical studies. Initiation sites are few. Corrosion spreads from these sites first in the form of filiform corrosion for a limited period of time and pitting which later develops into a cellular type of etching. The important factors affecting filiform corrosion are temperature, material structure and degree of polarization at the anodic sites. Filiform attack on AZ91, unlike the classical mechanisms of filiform corrosion on coated metals, is driven by hydrogen evolution reaction on the cathodic sites of the surface, occurs under significant anodic control, propagates at a high, constant speed independent of degree of polarization along preferential paths determined by compositional and crystallographic factors, and is a temporary phenomenon under open circuit conditions. Pitting corrosion is more predominant with decreasing anodic polarization.     

Ratio of free-to-total prostate specific antigen in serum cannot distinguish patients with prostate cancer from those with chronic inflammation of the prostate

PURPOSE: We demonstrate the effect of chronic inflammation of the prostate on the ratio of free-to-total prostate specific antigen (PSA) in serum calculated as a percentage of free PSA and, therefore, that percentage of free PSA is an unspecific means to distinguish among prostate cancer, chronic prostatitis and benign prostatic hyperplasia (BPH). MATERIALS AND METHODS: Total, free and percentage of free PSA was measured in 66 men with prostate cancer, 119 with BPH and 17 with asymptomatic chronic prostatitis. In all patients the diagnosis was histopathologically confirmed by microscopic examination of prostatic specimens after sextant biopsy, transurethral prostatic resection or prostatectomy. RESULTS: The median values of total, free and percentage of free PSA were 4.11 microg./l., 0.75 microg./l. and 20.4% in patients with BPH, 10.0 microg./l., 0.84 microg./l. and 8.5% in those with prostate cancer, and 7.60 microg./l., 1.23 microg./l. and 10.6% in those with chronic prostatitis. Patients with prostate cancer and chronic prostatitis had a significantly lower percentage of free PSA than those with BPH. Receiver operating characteristics curve analysis showed that percentage of free PSA as a discriminator between prostate cancer and BPH was not suitable for differentiating between prostate cancer and chronic prostatitis. CONCLUSIONS: Chronic prostatitis is not characterized by elevated total PSA concentrations alone but also by a decreased percentage of free PSA, a tendency similar to that in prostate cancer. This unspecific change in percentage of free PSA must be considered to interpret the percentage of free PSA correctly.     

High-Temperature Creep Behavior of Mixed Conducting La0.5Sr0.5Fe1−xCoxO3-δ (0.5≤x≤1) Materials

Steady-state compressive creep rate of La_0.5Sr_0.5Fe_0.5Co_0.5O_3−δ (LSFC) and La_0.5Sr_0.5CoO_3−δ (LSC) is reported in the temperature region 900°–1050°C and stress range 5–28 MPa. The stress exponents for the two materials were 1.71±0.18 and 1.24±0.15, respectively. The activation energy for creep was considerably higher for LSC (619±56 kJ/mol) than for LSFC (392±28 kJ/mol). The grain size exponent for LSC was 1.28±0.14. Considerably higher creep rates were observed for both materials in N₂ compared with air. Relaxation by creep of chemical-induced stresses in oxygen-permeable membranes is addressed, especially at low partial pressure of oxygen.     

Efficient identity-based GQ multisignatures

ISO/IEC 14888 specifies a variety of digital signature mechanisms to sign messages of arbitrary length. These schemes can be applied to provide entity authentication, data origin authentication, non-repudiation, and data integrity verification. ISO/IEC 14888 consists of three parts under the general title Information technology—Security techniques—Digital signatures. Part II, or ISO/IEC 14888-2 specifies the general structure and the fundamental procedures for the generation and verification of an identity-based signature (IBS) mechanism for messages of arbitrary length. Particularly, the IBS scheme of Guillou and Quisquater (GQ) is described in Clauses 6–8. In this paper, an efficient identity-based multisignature (IBMS) scheme is proposed for the GQ IBS scheme, which allows multiple users using the ISO/IEC 14888-2 standard GQ scheme to generate multisignatures. The scheme is efficient in the sense that both the length and the verification time of the multisignatures are fixed. The proposed ID-based multisignature scheme is also secure against forgeability under adaptive chosen-message attack and adaptive chosen-identity attack in random oracle model.     

Design of DL-based certificateless digital signatures

Public-key cryptosystems without requiring digital certificates are very attractive in wireless communications due to limitations imposed by communication bandwidth and computational resource of the mobile wireless communication devices. To eliminate public-key digital certificate, Shamir introduced the concept of the identity-based (ID-based) cryptosystem. The main advantage of the ID-based cryptosystem is that instead of using a random integer as each user’s public key as in the traditional public-key systems, the user’s real identity, such as user’s name or email address, becomes the user’s public key. However, all identity-based signature (IBS) schemes have the inherent key escrow problem, that is private key generator (PKG) knows the private key of each user. As a result, the PKG is able to sign any message on the users’ behalf. This nature violates the “non-repudiation” requirement of digital signatures. To solve the key escrow problem of the IBS while still taking advantage of the benefits of the IBS, certificateless digital signature (CDS) was introduced. In this paper, we propose a generalized approach to construct CDS schemes. In our proposed CDS scheme, the user’s private key is known only to the user himself, therefore, it can eliminate the key escrow problem from the PKG. The proposed construction can be applied to all Discrete Logarithm (DL)-based signature schemes to convert a digital signature scheme into a CDS scheme. The proposed CDS scheme is secure against adaptive chosen-message attack in the random oracle model. In addition, it is also efficient in signature generation and verification.     

A study on synthesized hydroxylapatite bioceramics

Sodium-doped hydroxylapatite powder was synthesized by the wet chemical method. Powder behavior, thermal stability, mechanical strength and biocompatibility were investigated.

The synthesized hydroxylapatite powder consisted of needles 1800 Å in width and 260 Å in length. The particle size, specific area (BET) and Ca/P atomic ratio were 0·1–0·3 μm, 29·9 m²/g and 1·62 respectively. A large amount of absorbed water existed in the powder, and evaporated on heating to 1000°C. Differential thermal analysis showed that no phase transformation occurred during heating to 1250°C. After heating at 1250°C for 1 h, the O---H bond was still found in the synthesized powder, by IR spectrophotometry. The optimum sintering condition was heating at 1200°C for 4 and this resulted in 680 MPa compressive strength, 1-1·3 μm mean grain size and 99% T.D.

The synthesized hydroxylapatite showed no cytotoxicity and had excellent tissue compatibility. This powder possesses a high potential for bone implantation.     

The influence of prostate volume on the ratio of free to total prostate specific antigen in serum of patients with prostate carcinoma and benign prostate hyperplasia

BACKGROUND: Determining the ratio of free to total prostate specific antigen (f-PSA to t-PSA, calculated as the percentage of f-PSA [f-PSA%]) in serum allow for a clearer distinction between patients with prostate carcinoma (PCa) and patients with benign prostate hyperplasia (BPH) than determining the level of t-PSA alone. To find influencing factors on f-PSA%, the authors investigated prostate volume, TNM classification, and tumor stage. METHODS: The authors measured f-PSA and t-PSA in 36 men with untreated PCa (tumor classification: T1, 2, 3pNO, MO), 44 patients with BPH, and 54 healthy controls. Prostate volume was determined by transrectal ultrasound. RESULTS: The median values of t-PSA and f-PSA% were 7.8 micrograms/L and 10.5% in PCa patients, 4.3 micrograms/L and 20.8% in patients with BPH, and 1.4 micrograms/L and 23.6% in the control group. Patients with PCa had a significantly lower proportion of f-PSA than BPH patients and healthy men. There was no correlation of f-PSA% to TNM stage or tumor grade. In PCa patients a significant positive correlation (correlation coefficient [r] = 0.51, P < 0.001) was found between f-PSA% and prostate volume, whereas there was no significant correlation in BPH patients (r = -0.27, P > 0.05). There was a significant difference in f-PSA% between PCa and BPH patients with prostate volumes smaller than 40 cm3 (9.0% vs. 21.6%, P < 0.01) but not between patients in these 2 groups with prostate volumes exceeding 40 cm3 (15.1% vs. 18.2%, P = 0.11). CONCLUSIONS: Determining the ratio of f-PSA to t-PSA to discriminate between PCa and BPH patients yields significant results only in men with a prostate volume of less than 40 cm3.     

The jet mixing effect on reaction flow in a bluff-body burner

This study investigates the mixing effects of primary and secondary jets on flame stability as fuel/air is injected into a bluff-body burner. A two-dimensional spray combustion model, based upon a SIMPLER method, is used for numerical studies of combusting flow. The influence of the jet-to-air velocity ratio on the recirculation zone behind the bluff body, the center axial velocity and the temperature profiles is studied in detail. The results show that mixing between the two jets is controlled by two vortex eddies on the inside and outside of the bluff-body. With a proper bluff-body blockage ratio, cone angle and jet-to-air velocity ratio a more stable flame can be achieved.     

Rapid diagnosis of tuberculous meningitis by polymerase chain reaction assay of cerebrospinal fluid

A polymerase chain reaction (PCR) method for the rapid diagnosis of tuberculous meningitis (TBM) was used to study prospectively 47 cerebrospinal fluid (CSF) samples from 45 patients. Twenty CSF samples were from patients with clinically suspected TBM and another 27 samples came from patients without clinically suspected TBM. Mycobacterial DNA was detected in 15 CSF samples (14 from patients with clinically suspected TBM and 1 from a patient not suspected of having TBM). Of the PCR-positive samples, 4 were also positive for mycobacterial culture. However, 32 PCR-negative samples were all culture-negative. All samples were negative for the acid-fast bacillus by direct smear. The single PCR-positive patient in the clinically unsuspected TBM group was initially diagnosed as suffering from aseptic meningitis on the basis of his clinical features. The mycobacterial culture of his CSF specimen was also positive and a revised diagnosis of an aseptic type of TBM was made. The estimations of specificity and sensitivity in this study were 100% and 70% respectively. The results showed that using a PCR to detect mycobacterial DNA in CSF for the early diagnosis of TBM is not only a rapid but also an accurate method.