Study of the synergistic effect of boron nitride and carbon nanotubes in the improvement of thermal conductivity of epoxy composites

The enhancement of the thermal conductivity, keeping the electrical insulation, of epoxy thermosets through the addition of pristine and oxidized carbon nanotubes (CNTs) and microplatelets of boron nitride (BN) was studied. Two different epoxy resins were selected: a cycloaliphatic (ECC) epoxy resin and a glycidylic (DGEBA) epoxy resin. The characteristics of the composites prepared were evaluated and compared in terms of thermal, thermomechanical, rheological and electrical properties. Two different dispersion methods were used in the addition of pristine and oxidized CNTs depending on the type of epoxy resin used. Slight changes in the kinetics of the curing reaction were observed in the presence of the fillers. The addition of pristine CNTs led to a greater enhancement of the mechanical properties of the ECC composite whereas the oxidized CNTs presented a greater effect in the DGEBA matrix. The addition of CNTs alone led to a marked decrease of the electrical resistivity of the composites. Nevertheless, in the presence of BN, which is an electrically insulating material, it was possible to increase the proportion of pristine CNTs to 0.25 wt% in the formulation without deterioration of the electrical resistivity. A small but significant synergic effect was determined when both fillers were added together. Improvements of about 750% and 400% in thermal conductivity were obtained in comparison to the neat epoxy matrix for the ECC and DGEBA composites, respectively. © 2019 Society of Chemical Industry     

Distribution of recombination currents in the space charge regionof heterostructure bipolar devices

This paper addresses the problem of the space charge region Shockley-Read-Hall (SRH) recombination currents in heterojunctions with one noncrystalline side. A formulation which generalizes previous works is discussed. The approach is based on the drift-diffusion model with a thermionic-field emission boundary condition. The main physical parameters which determine the relative contribution of each zone of the space charge region (SCR) to the total recombination current are identified. The general analysis is applied for the first time to amorphous/crystalline heterojunctions and design criteria are established to minimize the total recombination current     

Natural convection from narrow horizontal plates at moderate Rayleigh numbers

The present work deals with the natural convection flow and heat transfer from a horizontal plate cooled from above. Experiments are carried out for rectangular plates having aspect ratios between φ=0.036 and 0.43 and Rayleigh numbers in the range 290?Ra_w?3.3×10⁵. These values of Ra_w and φ have been selected below those commonly considered in previous research in view of a future application to the design of printed circuit boards. The plates are made of two different metals, copper and steel. The choice of a metal is relevant to the present problem because the plates are heated by means of an electric current. Important variations of the surface temperature are observed along the transverse direction for the steel plates. The surface of the copper plates is almost isothermal because of the high thermal conductivity of the metal.Calculations for a semi-infinite plate are carried out to predict the transverse profiles of the surface temperature and heat flux and to visualize the structure of the flow. Three-dimensional calculations are also used at a qualitative level to observe the changes in the flow structure due to the finite length of the plate. Present results are compared with both previous experimental work and analyses that are based on boundary layer theory. It is shown that analyses for an infinite boundary layer are not completely applicable to the present problem because of its different physics. The most relevant feature of the natural convection flow, which is not predicted by boundary layer analyses, is a thermal plume rising near the center of the plate.Present heat transfer results differ from previous experimental work because of the lower Rayleigh numbers and aspect ratios investigated here. The Nusselt number is found to depend on Ra_wⁿ, with the exponent n=0.17 being lower than most of the values reported in the literature. This comparatively low value is related to the transverse conduction of heat through the air, which becomes increasingly significant as Ra_w approaches zero. It is shown that such a low-Ra_w effect can be accounted for in a physically consistent manner by adding a constant term to the heat transfer correlation. On the other hand, it is found that the Nusselt number does not significantly depend on the aspect ratio in the range of φ investigated contrary to what has been previously reported for wider plates.     

In Vitro Characterization of Human CD24hiCD38hi Regulatory B Cells Shows CD9 Is Not a Stable Breg Cell Marker

Regulatory B (Breg) cells are endowed with immune suppressive functions. Various human and murine Breg subtypes have been reported. While interleukin (IL)-10 intracellular staining remains the most reliable way to identify Breg cells, this technique hinders further essential functional studies. Recent findings suggest that CD9 is an effective surface marker of murine IL-10 competent Breg cells. However, the stability of CD9 and its relevance as a unique marker for human Breg cells, which have been widely characterized as CD24^hiCD38^hi, have not been investigated. Here, we demonstrate that CD9 expression is sensitive to in vitro B cell stimulations. CD9 expression could either be re-expressed or downregulated in purified CD9-negative B cells and CD9-positive B cells, respectively. We found no significant differences in the Breg differentiation capacity of the CD9-negative and CD9-positive B cells. Furthermore, CD9-positive B cells co-express CD40 and CD86, suggesting their nature as B cell activation or co-stimulatory molecules, rather than regulatory ones. Therefore, we report the relatively unstable CD9 as a distinct surface molecule, indicating the need for further research for a more reliable marker to purify human Breg cells.     

A Secure Elliptic Curve-Based RFID Protocol

Nowadays, the use of Radio Frequency Identification (RFID) systems in industry and stores has increased. Nevertheless, some of these systems present privacy problems that may discourage potential users. Hence, high confidence and effient privacy protocols are urgently needed. Previous studies in the literature proposed schemes that are proven to be secure, but they have scalability problems. A feasible and scalable protocol to guarantee privacy is presented in this paper. The proposed protocol uses elliptic curve cryptography combined with a zero knowledge-based authentication scheme. An analysis to prove the system secure, and even forward secure is also provided. This work is supported by the Generalitat de Catalunya under Grant No. FIC 2007FIC 00880, and the projects of the Spanish MCyT MTM2007-66842-C02-02 and TIN2006-15662-C02-02.     

Self-adaptive utility-based web session management

In the Internet, where millions of users are a click away from your site, being able to dynamically classify the workload in real time, and predict its short term behavior, is crucial for proper self-management and business efficiency. As workloads vary significantly according to current time of day, season, promotions and linking, it becomes impractical for some ecommerce sites to keep over-dimensioned infrastructures to accommodate the whole load. When server resources are exceeded, session-based admission control systems allow maintaining a high throughput in terms of properly finished sessions and QoS for a limited number of sessions; however, by denying access to excess users, the website looses potential customers.In the present study we describe the architecture of AUGURES, a system that learns to predict Web user’s intentions for visiting the site as well its resource usage. Predictions are made from information known at the time of their first request and later from navigational clicks. For this purpose we use machine learning techniques and Markov-chain models. The system uses these predictions to automatically shape QoS for the most profitable sessions, predict short-term resource needs, and dynamically provision servers according to the expected revenue and the cost to serve it. We test the AUGURES prototype on access logs from a high-traffic, online travel agency, obtaining promising results.     

Proteomic analysis in cerebrospinal fluid of patients with atypical nonketotic hyperglycinemia and pulmonary hypertension - A pilot study

A variant phenotype of nonketotic hyperglycinemia has been described by our group associated with pulmonary hypertension. The aim of this study is to investigate the cerebrospinal fluid proteomes to get an insight into this neurodegenerative process producing leukoencephalopathy with white matter spongiform degeneration. DIGE and MALDI-TOF-TOF analyses were performed to carry out the proteomic study of four patients against three normal controls and one additional control of a classical nonketotic hyperglycinemia. The differential proteomic analysis showed a displacement of some series of spots toward the acidic side. The shifted proteins showed a high degree of carbonylation and increased methionine sulfoxidation was found in cystatin C and in vitamin-D-binding protein. These findings in addition to the increase of serum malondialdehyde concentration provide evidence of an oxidative stress in the patients under study, which is probably systemic rather than mainly confined to the CNS. The similarities of our findings with those found in other neurodegenerative diseases suggest that oxidative damage is commonly involved in these pathologies. DIGE technology improves the 2-D PAGE differential analysis and it is suitable in proteomic studies with a small number of cases.     

Aligned texture map creation for pose invariant face recognition

In last years, Face recognition based on 3D techniques is an emergent technology which has demonstrated better results than conventional 2D approaches. Using texture (180° multi-view image) and depth maps is supposed to increase the robustness towards the two main challenges in Face Recognition: Pose and illumination. Nevertheless, 3D data should be acquired under highly controlled conditions and in most cases depends on the collaboration of the subject to be recognized. Thus, in applications such as surveillance or control access points, this kind of 3D data may not be available during the recognition process. This leads to a new paradigm using some mixed 2D-3D face recognition systems where 3D data is used in the training but either 2D or 3D information can be used in the recognition depending on the scenario. Following this concept, where only part of the information (partial concept) is used in the recognition, a novel method is presented in this work. This has been called Partial Principal Component Analysis (P²CA) since they fuse the Partial concept with the fundamentals of the well known PCA algorithm. This strategy has been proven to be very robust in pose variation scenarios showing that the 3D training process retains all the spatial information of the face while the 2D picture effectively recovers the face information from the available data. Furthermore, in this work, a novel approach for the automatic creation of 180° aligned cylindrical projected face images using nine different views is presented. These face images are created by using a cylindrical approximation for the real object surface. The alignment is done by applying first a global 2D affine transformation of the image, and afterward a local transformation of the desired face features using a triangle mesh. This local alignment allows a closer look to the feature properties and not the differences. Finally, these aligned face images are used for training a pose invariant face recognition approach (P²CA).     

A formal analysis of database replication protocols with SI replicas and crash failures

This paper provides a formal specification and proof of correctness of a basic Generalized Snapshot Isolation certification-based data replication protocol for database middleware architectures. It has been modeled using a state transition system, as well as the main system components, allowing a perfect match with the usual deployment in a middleware system. The proof encompasses both safety and liveness properties, as it is commonly done for a distributed algorithm. Furthermore, a crash failure model has been assumed for the correctness proof, although recovery analysis is not the aim of this paper. This allows an easy extension toward a crash-recovery model support in future works. The liveness proof focuses in the uniform commit: if a site has committed a transaction, the rest of sites will either commit it or it would have crashed.