In vivo evaluation of a mucoadhesive polymeric caplet for intravaginal anti-HIV-1 delivery and development of a molecular mechanistic model for thermochemical characterization

Context and objective: The aim of this study was to develop, characterize and evaluate a mucoadhesive caplet resulting from a polymeric blend (polymeric caplet) for intravaginal anti-HIV-1 delivery.

Materials and methods: Poly(lactic-co-glycolic) acid, ethylcellulose, poly(vinylalcohol), polyacrylic acid and modified polyamide 6, 10 polymers were blended and compressed to a caplet-shaped device, with and without two model drugs 3′-azido-3′-deoxythymidine (AZT) and polystyrene sulfonate (PSS). Thermal analysis, infrared spectroscopy and microscopic analysis were carried out on the caplets employing temperature-modulated DSC (TMDSC), Fourier transform infra-red (FTIR) spectrometer and scanning electron microscope, respectively. In vitro and in vivo drug release analyses as well as the histopathological toxicity studies were carried out on the drug-loaded caplets. Furthermore, molecular mechanics (MM) simulations were carried out on the drug-loaded caplets to corroborate the experimental findings.

Results and discussion: There was a big deviation between the T_g of the polymeric caplet from the T_g's of the constituent polymers indicating a strong interaction between constituent polymers. FTIR spectroscopy confirmed the presence of specific ionic and non-ionic interactions within the caplet. A controlled near zero-order drug release was obtained for AZT (20 d) and PSS (28 d). In vivo results, i.e. the drug concentration in plasma ranged between 0.012–0.332?mg/mL and 0.009–0.256?mg/mL for AZT and PSS over 1–28 d.

Conclusion: The obtained results, which were corroborated by MM simulations, attested that the developed system has the potential for effective delivery of anti-HIV-agents.     

Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

Pilot Plant Study of Simultaneous Sewage Sludge Digestion and Metal Leaching

This research is related to a preindustrial pilot scale study of the performance of the simultaneous sewage sludge digestion and metal leaching (SSDML) process for decontamination and stabilization of sewage sludge. Ten batch tests were carried out in two 4?m3 bioreactors under various conditions of operation. Results indicated that the addition of 1.0 to 1.5?g?S0/L, which is the equivalent of approximately 30 to 50?kg?S0 per tons dry sludge, is sufficient to obtain conditions of acidity (pH<2.5) and oxido-reduction potential greater than 500 mV necessary for an effective solubilization of toxic metals. The final average of metal solubilization in the output sludge during the SSDML process varied in the following ranges: 25–78% Cd, 9–32% Cr, 48–100% Cu, 77–99% Mn, 15–53% Ni, 12–47% Pb, and 66–100% Zn. The N, P, and K contents were also preserved in the decontaminated sludge. Moreover, the use of low concentrations of elemental sulfur makes it possible to obtain decontaminated sludge with a low total sulfur content (1.4–1.5% S) compatible with agricultural use. The suspended solids removal calculated for the SSDML process was slightly lower, (2.5±0.4)% volatile suspended solids per day, than those reached using standard aerobic digestion. Finally, the SSDML process was found to be effective in removing bad odors and in the destruction (99–100%) of indicator bacteria.     

Activation of extracellular matrix metalloproteinases in equine laminitis

Samples of connective tissue obtained from the hoof of six laminitic and eight non-laminitic adult horses were analysed zymographically to investigate whether connective tissue matrix metalloproteinases are activated or induced during laminitis. The activity or matrix metalloproteinases was substantially greater in the tissues from the laminitic horses than in the tissues from the non-laminitic horses. A comparison of the collagenolytic activity in the laminitic and control tissues showed that collagenolytic activities corresponding to the 92 kDa (P < 0.001), 72 kDa (P < 0.01) and 66 kDa (P < 0.01) bands were induced in the laminitic tissues.     

Ubiquitin-Specific Protease 29 Regulates Cdc25A-Mediated Tumorigenesis

Cell division cycle 25A (Cdc25A) is a dual-specificity phosphatase that is overexpressed in several cancer cells and promotes tumorigenesis. In normal cells, Cdc25A expression is regulated tightly, but the changes in expression patterns in cancer cells that lead to tumorigenesis are unknown. In this study, we showed that ubiquitin-specific protease 29 (USP29) stabilized Cdc25A protein expression in cancer cell lines by protecting it from ubiquitin-mediated proteasomal degradation. The presence of USP29 effectively blocked polyubiquitination of Cdc25A and extended its half-life. CRISPR-Cas9-mediated knockdown of USP29 in HeLa cells resulted in cell cycle arrest at the G0/G1 phase. We also showed that USP29 knockdown hampered Cdc25A-mediated cell proliferation, migration, and invasion of cancer cells in vitro. Moreover, NSG nude mice transplanted with USP29-depleted cells significantly reduced the size of the tumors, whereas the reconstitution of Cdc25A in USP29-depleted cells significantly increased the tumor size. Altogether, our results implied that USP29 promoted cell cycle progression and oncogenic transformation by regulating protein turnover of Cdc25A.     

Ammonia volatilization from urea as affected by the addition of iron pyrites and method of application

Laboratory incubations were conducted to determine the ammonia (NH₃) loss from urea as affected by the addition of coarse and ground (fine) pyrites at 1:1, 1:2 and 1:5 urea: pyrite (w/w) ratios and methods of application (surfaceapplication, incorporation and placement). Coarse pyrites (>-2mm) were not effective in reducing NH₃ loss from urea when surface applied even at the highest ratio of pyrite (15.9% vs 18.7% without pyrite). Ground pyrites (0.1–0.25 mm), in 1:1 ratio, had about 5% less NH₃ loss than the urea alone treatment. Higher ratios of pyrites reduced NH₃ loss much more. Ammonia losses were the most with surface-applied urea (18.9%) and the least (13.5%) when placed (2.5 cm) below the soil surface. Addition of ground pyrite to surface-applied urea (1:1 ratio) decreased the loss to 13.2%. Urea+pyrite placed below the soil surface had the least loss (9.8%). Results indicate that combined application of urea and fine pyrite could reduce NH₃ loss.     

Comparison of the generation of oil by the extraction and the hydropyrolysis of biomass

This paper discusses the maximisation of the yields of useful bio-oils generated from seeds and nut-shells both by extraction and by hydropyrolysis. The formation and the composition of the bio-oils are also discussed.Powdered (<0.25 mm diameter) Rapeseed, Linseed and Safflower seed and Hazel nut and Walnut shells, that is, fresh precursors of liptinite, have been characterised by their elemental analyses, infra-red and NMR spectra. Bio-oils obtained both by extraction and by slow hydropyrolysis to 520 °C at moderate pressure in the presence of ammonium dioxydithiomolybdate have been compared by the same analyses and by gas chromatography. Consistent with previous work [Hardy JA. A greener future with biodiesel. Green Chem 2001 G56-G57], extraction of the seeds with organic solvents, including Diesel oil, gave yields of up to 40% together with an uninteresting residue. However, subsequent saponification of the residues gave further yields of oil. Hydropyrolysis removed oxygen from the seeds as water and as oxides of carbon to generate bio-oil in yields of up to 75%. Whereas little oil could be extracted from the nut-shells, hydropyrolysis gave oil yields of ∼40%. Some char was also formed, suggesting that optimisation of the hydropyrolysis might give even larger yields of oil.     

CONCENTRATION POLARIZATION OCCURRING INSIDE THE MEMBRANE DURING STEADY STATE PERVAPORATION

Experimental profiles of a single penetrant (water) across the membrane have been established at different downstream pressures during steady state pervaporation. The profiles ofacetic acid-water binary penetrant system across the membrane were also measured at different downstream pressures, temperatures and compositions during steady state pervaporation. A stack of identical pre-characterized symmetric aromatic polyamide membranes was used for the profile study. The theoretical prediction of concentration polarization from mathematical equations has been confirmed by the experimental profile data for a binary penetrant system.