Social licence: power imbalances and levels of consciousness – two case studies

ABSTRACT

Social licence to operate (SLO) is a term that is finding increasing acceptance in a number of industries. Like all new terms, its precise meaning and implications are still being investigated. Using data from previous studies, this paper offers an analysis of the SLO of two case studies with each study being viewed separately through the grid of a distinct theoretical framework. Case study 1 looks at the development of differential social licence negotiated in the Hamlet of Cambridge Bay, Nunavut, as a result of an impact and benefit agreement negotiated between Tahera Diamond Corp. and the Kitikmeot Inuit Organisation in 2004. The study demonstrates that general acceptance of resource development can be uneven and reflect an unequal distribution of decision-making power. In case study 2, stakeholders of a failed mineral development project were queried across time about the specifics of the proposed mine development and were queried about resource development across different levels of consciousness. Perhaps, SLO is variable across different levels of consciousness. The paper concludes with observations about the variable nature of SLO acceptance across populations and across levels of consciousness within individuals. Perhaps, the concept of SLO is, in fact, complex, difficult to define and measure and, at this point, of limited utility as a measure of resource development acceptance.     

Threshold voltage-minimum gate length trade-off in buried channelPMOS devices for scaled supply voltage CMOS technologies

The trade-off between threshold voltage (V_th) and the minimum gate length (L_min) is discussed for optimizing the performance of buried channel PMOS transistors for low voltage/low power high-speed digital CMOS circuits. In a low supply voltage CMOS technology it is desirable to scale V_th and L_min for improved circuit performance. However, these two parameters cannot be scaled independently due to the channel punch-through effect. Statistical process/device modeling, split lot experiments, circuit simulations, and measurements are performed to optimize the PMOS transistor current drive and CMOS circuit speed. We show that trading PMOS transistor V_th for a smaller L_min results in faster circuits for low supply voltage (3.3 to 1.8 V) n⁺-polysilicon gate CMOS technology, Circuit simulation and measurements are performed in this study. Approximate empirical expressions are given for the optimum buried channel PMOS transistor V _th for minimizing CMOS circuit speed for cases involving: (1) constant capacitive load and (2) load capacitance proportional to MOS gate capacitance. The results of the numerical exercise are applied to the centering of device parameters of a 0.5 μm 3.3 V CMOS technology that (a) matches the speed of our 0.5 μm 5 V CMOS technology, and (b) achieves good performance down to 1.8 V power supply. For this process the optimum PMOS transistor V_th (absolute value) is approximately 0.85-0.90 V     

Inside Front Cover: Photonic Crystal Structures as a Basis for a Three‐Dimensionally Interpenetrating Electrochemical‐Cell System (Adv. Mater. 13/2006)

The inside cover shows an SEM image of a 3D‐interpenetrating electrochemical cell with submicrometer features, as reported by Stein and coworkers on p. 1750. The pores of an inverse‐opal carbon electrode are coated with a conformal layer of a polymer separator and infiltrated with vanadia to form the opposite electrode after lithiation. The idealized scheme illustrates lithium‐ion transport between the electrodes through the polymer membrane.     

Automatic reconstruction of as-built building information models from laser-scanned point clouds: A review of related techniques

Building information models (BIMs) are maturing as a new paradigm for storing and exchanging knowledge about a facility. BIMs constructed from a CAD model do not generally capture details of a facility as it was actually built. Laser scanners can be used to capture dense 3D measurements of a facility's as-built condition and the resulting point cloud can be manually processed to create an as-built BIM — a time-consuming, subjective, and error-prone process that could benefit significantly from automation. This article surveys techniques developed in civil engineering and computer science that can be utilized to automate the process of creating as-built BIMs. We sub-divide the overall process into three core operations: geometric modeling, object recognition, and object relationship modeling. We survey the state-of-the-art methods for each operation and discuss their potential application to automated as-built BIM creation. We also outline the main methods used by these algorithms for representing knowledge about shape, identity, and relationships. In addition, we formalize the possible variations of the overall as-built BIM creation problem and outline performance evaluation measures for comparing as-built BIM creation algorithms and tracking progress of the field. Finally, we identify and discuss technology gaps that need to be addressed in future research.     

Performance of submillimeter square hollow waveguides

Propagation losses are determined for 100 microm x 100 microm square, hollow waveguides constructed from glass capillaries. The small size makes it possible to observe optical effects not easily seen with larger waveguides. The depletion of higher-order even modes creates a large, nonlinear loss. Over a distance of a meter the loss approaches the smaller, linear value expected for the fundamental mode. Additionally, the lowest two even modes beat to produce an oscillatory loss with a period of approximately 2 cm. Making the focal radius 0.35 the waveguide width minimizes these two effects. In a related study, 50-microm waveguides embossed in polydimethylsiloxane are shown to have losses similar to glass capillaries.     

Prolate spheroidal antennas in isotropic plasma media

The problems of a gap-excited finite-sized prolate spheroidal antenna, with and without a confocal prolate spheroidal vacuum sheath, operated in a uniform cold and in a uniform warm lossy plasma medium, have been considered by applying boundary value problem techniques. The dependence of the input admittance, the current distribution, and the radiation pattern, upon the collision frequency, the electron temperature, the length of the antenna, the length-to-radius ratio for the antenna, the ratio of the plasma frequency to the operating frequency, and the thickness of a vacuum sheath have been investigated. Admittance curves are given from which the input admittance of a finite linear antenna can be estimated for a wide range of operating conditions and length-to-radius ratios. Conductance and susceptance maxima, dependent upon the vacuum sheath thickness, have been observed when using the cold plasma model foromega < omega_{p}. When using the warm plasma model in conjunction with the boundary condition that the normal component of the fluid velocity is zero at the antenna surface and at the vacuum sheath surface, the radiation resistance of the antenna is increased significantly for the parameters considered.     

Resistivity And Induced-Polarization Probing in the Vicinity of a Spherical Anomaly

The mathematical formulae governing the interaction of a low-frequency source of electric current with a spherical anomaly are given. These formulae are used to determine the apparent resistivity and induced-polarization response between electrodes located within boreholes in the medium. Numerical results are given illustrating the spatial variation of these parameters.     

Ultrawideband Radar Measurements of Thickness of Snow Over Sea Ice

An accurate knowledge of snow thickness and its variability over sea ice is crucial in determining the overall polar heat and freshwater budget, which influences the global climate. Recently, algorithms have been developed to extract snow thicknesses from satellite passive microwave data. However, validation of these data over the large footprint of the passive microwave sensor has been a challenge. The only method used thus far has been with meter sticks during ship cruises. To address this problem, we developed an ultrawideband frequency-modulated continuous-wave radar to measure the snow thickness over sea ice. We synthesized a very linear chirp signal by using a phase-locked loop with a digitally generated chirp signal as a reference to obtain a fine-range resolution. The radar operates over the frequency range from 2-8 GHz. We made snow-thickness measurements over the Antarctic sea ice by operating the radar from a sled in September and October 2003. We performed radar measurements over 11 stations with varying snow thicknesses between 4 and 85 cm. We observed an excellent agreement between radar estimates of snow thickness with physical measurements, achieving a correlation coefficient of 0.95 and a vertical resolution of about 3 cm. Comparison of simulated radar waveforms using a simple transmission line model with the measurements confirms our expectations that echoes from snow-covered sea ice are dominated by reflections from air-snow and snow-ice interfaces.     

Application of EXAFS in Catalysis. Structure of Bimetallic Cluster Catalysts

In recent years the utility of extended x-ray absorption fine structure (EXAFS) as a probe for the study of catalysts has been clearly demonstrated [1–13]. Measurements of EXAFS are particularly valuable for very highly dispersed catalysts. Supported metal systems, in which small metal clusters or crystallites are commonly dispersed on a refractory oxide such as alumina or silica, are good examples of such catalysts. The rätio of surface atoms to total atoms in the metal clusters is generally high and may even approach unity in some cases. With such catalysts it is difficult or impossible to obtain structural information by conventional x-ray diffraction methods [14].