Preparation,characterization, and some physical properties of polypropylene/poly(methyl acrylate)‐grafted glass wool composites

Polypropylene/poly(methyl acrylate)‐grafted glass wool (PMA‐g‐GW) mixes were prepared. The polymerization process was carried out using potassium persulfate (PPS) and PPS/acetone sodium bisulfite (ASBS) as a redox‐pair initiation system at 60 and 70°C. The effect of using PPS or PPS/ASBS on the grafting percent and conversion percent reveals that the conversion percent values on using PPS as an initiator are higher than those of PPS/ASBS, while in the case of grafting, the inverse is true, that is, using PPS as an initiator gives grafting percent values lower than those that can be obtained using PPS/ASBS. The dielectric properties, thermal diffusivity, specific heat capacity, and thermal conductivity of PP loaded with modified glass wool as a function of different types and concentrations of initiators—used in the grafting polymerization process, namely, PPS and the redox initiating system—were also studied. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 723–732, 2003     

Aluminum-27 and Silicon-29 Magic-Angle Spinning Nuclear Magnetic Resonance Study of the Kaolinite-Mullite Transformation

The ²⁷Al and ²⁹Si magic-angle spinning nuclear magnetic resonance (MAS-NMR) study of the kaolinite-mullite transformation has shown the presence of Al in tetra- and pentacoordination in dehydroxylated kaolinite. The ²⁹Si NMR signal analysis of samples heated above 400°C demonstrates that the tetrahedral sheet of kaolinite begins to break down near 600°C and continues to do so to 900°C. From the ²⁷Al NMR signal evolution, it can be deduced that the exothermic peak at 980°C in DTA curves is associated with the modification of the coordination of Al, which changes from the tetra- or pentacoordination to the more stable octahedral coordination. Heating the sample at 880°C for 36 h produces the same transformation in the coordination of Al ions and the elimination of the exothermic peak at 980°C in the DTA diagram. After this transformation, all spectra show two tetrahedral lines characteristic of mullite, indicating that nuclei of mullite with low crystallinity are generated during the exothermic process which are not detected by XRD. At higher temperatures tetrahedral NMR peaks increase in intensity, yielding, at 1200°C, the 3:2 mullite NMR spectrum.     

Knowledge Acquisition and Design Using Semantics and Perception: A Case Study for Autonomous Robots

Neural Processing Letters - The pervasive use of artificial intelligence and neural networks in several different research fields has noticeably improved multiple aspects of human life. The...     

Practical Implementation of Novel Robust Position Control Scheme for Synchronous Reluctance Motor

A variable structure robust position controller is presented for a three-phase synchronous reluctance motor. Linear control and variable structure control and pulse-width modulation generation are combined. These provide robust, fast, and accurate position control without the penalty of high chattering. Schemes, including conventional sliding-mode control and the proposed scheme, are tested under parameter variations, and sudden perturbations are applied to the system at a specific time, then compared. This scheme uses both advantages of traditional variable structure control methods and linear methods. The disadvantages of each method, such as chattering and parameter sensitivity, are minimized. Results demonstrate that the proposed technique preserves the classical linear position control merits, while both the steady-state and transient behavior are significantly improved in terms of robustness, accuracy, and low ripple. The results also prove that the position reference command is perfectly tracked in spite of motor parameter uncertainties and load torque disturbance in control of the system that uses the new schemes.     

Crack deflection at an interface of alumina/metal joint: A numerical analysis

Deflection of a crack at the bimaterial interface is the initial mechanism required for obtaining enhanced toughness in bimaterial system. In this paper, a criterion is presented to predict the competition between crack deflection and penetration at the interface, using an energy release rate criterion. The finite element methods are used to calculate the strain energy release rates at the crack tip of alumina–metal bimaterial that either deflect or penetrate at the interface as a function of elastic mismatch and length of the deflected or penetrated crack. The effects of the elastic properties of two bonded materials were highlighted in order to evaluate the conditions for the crack deflection by the interface as well as the distance between the crack tip and the interface.     

Enhanced dynamic credential generation scheme for protection of user identity in mobile-cloud computing

To improve the resource limitation of mobile devices, mobile users may utilize cloud-computational and storage services. Although the utilization of the cloud services improves the processing and storage capacity of mobile devices, the migration of confidential information on untrusted cloud raises security and privacy issues. Considering the security of mobile-cloud-computing subscribers’ information, a mechanism to authenticate legitimate mobile users in the cloud environment is sought. Usually, the mobile users are authenticated in the cloud environment through digital credential methods, such as password. Once the users’ credential information theft occurs, the adversary can use the hacked information for impersonating the mobile user later on. The alarming situation is that the mobile user is unaware about adversary’s malicious activities. In this paper, a light-weight security scheme is proposed for mobile user in cloud environment to protect the mobile user’s identity with dynamic credentials. The proposed scheme offloads the frequently occurring dynamic credential generation operations on a trusted entity to keep minimum processing burden on the mobile device. To enhance the security and reliability of the scheme, the credential information is updated frequently on the basis of mobile-cloud packets exchange. Furthermore, the proposed scheme is compared with the existing scheme on the basis of performance metrics i.e. turnaround time and energy consumption. The experimental results for the proposed scheme showed significant improvement in turnaround time and energy consumption as compared to the existing scheme.