Thermal induced transformations in glassy chalcogenides SixTe60−xAs30Ge10

Temperature-induced transformations are considered to be interesting characteristic properties of amorphous materials including the Si _x Te_60–x As₃₀Ge₁₀ system, withx=5, 10, 12 and 20. Density (), X-ray diffraction and differential thermal analysis (DTA) were used to characterize the compositions. DTA traces of each glass composition at different heating rates from 5 to 30° C min^–1 were obtained and interpreted. Fast and slow cooling cycles were used to determine the rate of structure formation. Cycling studies of materials show no memory effect but only ovonic switching action. The compositional dependence of the crystallization activation energy (E) and the coefficient of glass-forming tendency (K _gl) have been calculated. The thermal transition temperatures and associated changes in specific heat have been examined as a function of the Te/Si ratio by differential scanning calorimetry. It was found that andE increase linearly with increasing tellurium content, while the heat capacity (c _p) andK _gl, decrease with increasing tellurium content.E=1.54 eV andc _p=0.246 J g^–1 K^–1 forx=20 whileE=2.74eV andc _p=0.22 J g^–1 K^–1 forx=5.     

Effect of the Te/Si ratio on the electrical characteristics of the amorphous chalcogenide switches

The effect of composition on amorphous chalcogenide threshold switches of the system Si _x Te_60-x As₃₀Ge₁₀, wherex = 5, 10, 12 and 20, has been studied. The compositionx = 5 shows the best switching characteristics, e.g. the smallest holding voltage (V _h = 0.4V), the highest ON state current (I _h = 45A) and smallest threshold voltage (V _s = 1.5V). Applying the three mechanisms of conductance of Mottet al. (Phil. Mag. 37 (1975) 961), it is found that for a particular composition ₂ < ₁ < ₀ (the pre-exponential factors) andW ₂ < (E _a –E ₁ +W ₁) < (E _c –E _f) (whereE _a,E _c andE _e = activation energies at band edge, fermi level and conduction band;W ₁ andW ₂ = activation energy for hopping). It was found that the density of states at the fermi levelN(E _f) increases with the decrease of silicon content. The results provided further evidence against thermal interpretations and thereby support electronic models of threshold switching for these glass systems.     

Friedel-Craft Reaction of Glutaric Anhydride with benzene and toluene

The reaction of glutaric anhydride with benzene and toluene has been thoroughly studied. 4,4-Diphenyl-pent-4-enoic acid and 1,3-dibenzoyl propane were isolated as by-products of the reaction with benzene. The mechanism of formation of the by-products has been proved. In case of toluene no by-products were detected.     

Enterprise Resource Planning Systems Introduction and Internal Auditing Legitimacy: An Institutional Analysis

In this article, the authors examine how the internal audit function maintains its legitimacy when enterprise resource planning systems are introduced. This work centers on an in-depth case study of a multinational bank and finds that enterprise resource planning systems impose an institutional logic of control based on interlinked assumptions. These assumptions motivate changes in the practice and structure of the internal audit function to become an integrated and comprehensive function to maintain its legitimacy.     

An enhanced linear regression-based building energy model (LRBEM+) for early design

The design community lacks simple, data-driven energy assessment tools to explore energy-efficient alternatives during the early stages of building design. A promising option is to utilize a whole building energy simulation engine (e.g. EnergyPlus) within a Monte Carlo simulation framework to develop a linear regression-based building energy model (LRBEM) that can predict idealized heating and cooling loads based on parameters relevant to early design. Previous work was limited to medium-sized US commercial office buildings with rectangular geometries. A key limitation is addressed in this paper by considering complex geometries. A reformulated model, LRBEM+, is developed and tested with a suite of building geometries that represent limiting cases. The resultant relative error between LRBEM+ and EnergyPlus is generally less than 10%. Furthermore, LRBEM+ correctly predicts the direction and magnitude of changes in heating and cooling loads in response to changes in the most influential early design parameters.     

Impact of bismuth oxide on the structure,optical features and ligand field parameters of borosilicate glasses doped with nickel oxide

Understanding the impact of bismuth cations on the optical properties of borosilicate glass is significant for manipulating borate glass applications. In this paper, the influence of bismuth cations on both structural and optical properties of borosilicate glass doped with NiO was investigated. Different glass samples, containing different amounts of Bi₂O₃ and a constant amount of NiO, were prepared and studied. Infrared (IR) analysis was carried out to study the internal structure within the investigated glass samples. Optical absorption studies were performed to investigate the impact of Bi₂O₃ content on optical properties of the BiBaNiB-glasses. Astonishingly, with Bi₂O₃ addition, an absorption band at 380 nm has appeared. Moreover, this band is overlapped with the Urbach edge; which regularly produced an artificial edge-like feature at ~450 nm. A detailed deconvolution protocol has been implemented for an appropriate understanding of these spectra and unraveling the hidden Urbach edge. Optical band gap energy, linear and nonlinear refractive index for each BiBaNiB sample were calculated. Furthermore, the metallization criterion was calculated to examine the metallic or insulating nature of the BiBaNiB-glasses. The values of the nonlinear third-order susceptibility and nonlinear refractive index were increased with Bi₂O₃ doping. The BiBaNiB-glasses exhibited outstanding stability and optical band gap than the pristine glass sample, which makes it possible for practical applications.     

Secure and efficient anonymous authentication scheme for three-tier mobile healthcare systems with wearable sensors

The mobility and openness of wireless communication technologies make Mobile Healthcare Systems (mHealth) potentially exposed to a number of potential attacks, which significantly undermines their utility and impedes their widespread deployment. Attackers and criminals, even without knowing the context of the transmitted data, with simple eavesdropping on the wireless links, may benefit a lot from linking activities to the identities of patient’s sensors and medical staff members. These vulnerabilities apply to all tiers of the mHealth system. A new anonymous mutual authentication scheme for three-tier mobile healthcare systems with wearable sensors is proposed in this paper. Our scheme consists of three protocols: Protocol-1 allows the anonymous authentication nodes (mobile users and controller nodes) and the HSP medical server in the third tier, while Protocol-2 realizes the anonymous authentication between mobile users and controller nodes in the second tier, and Protocol-3 achieves the anonymous authentication between controller nodes and the wearable body sensors in the first tier. In the design of our protocols, the variation in the resource constraints of the different nodes in the mHealth system are taken into consideration so that our protocols make a better trade-off among security, efficiency and practicality. The security of our protocols are analyzed through rigorous formal proofs using BAN logic tool and informal discussions of security features, possible attacks and countermeasures. Besides, the efficiency of our protocols are concretely evaluated and compared with related schemes. The comparisons show that our scheme outperforms the previous schemes and provides more complete and integrated anonymous authentication services. Finally, the security of our protocols are evaluated by using the Automated Validation of Internet Security Protocols and Applications and the SPAN animator software. The simulation results show that our scheme is secure and satisfy all the specified privacy and authentication goals.