Dissolution of phase-separated domains after a jump to a temperature in the single-phase region

Phase-separated domains prepared in the two-phase region were dissolved at a temperature in the single-phase region, and their dissolution dynamics was studied by using the time-resolved light scattering (TRLS) technique and a scanning electron microscope (SEM). The time t_ps of preparation of domains was chosen to be long enough for phase separation to proceed into the late stage. The scattered light intensity at small wavenumbers increased before it attenuated. As t_ps increased, the increase at smaller wavenumbers became more significant and the peak intensity decreased only slightly with dissolution time. The characteristic wavenumber q_m evaluated from TRLS and SEM followed the power-law relation q_mt^−0.3.     

Distributed architecture for energy management D-structure

Electric power systems are expanding in size and complexity, and the requirement for the energy management system (EMS) is becoming more important. In this computer control system, a single control computer is used mainly as the primary computer and its software is very complicated because of its hugh number of small, quick tasks to obtain high response speed. Therefore, much effort is needed to develop and modify the programs, and the responsiveness of this centralized architecture varies greatly when many faults occur in the power system. This paper describes a new distributed architecture for the EMS. Distributed processors execute the functions cooperatively with periodic access to the common bulletin board database in which information about the power system exist. This architecture facilitates the software development and maintenance, and it also enhances the performance by the parallel processing of the distributed functions.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Real-time CAM-based Hough transform algorithm and its performance evaluation

Abstract. This paper proposes a highly parallel Hough transform algorithm for real-time straight-line extraction and its hardware implementation on a content-addressable memory (CAM). To achieve high-speed processing, incrementation for voting, which composes the Hough transform, and calculations for coordinate updating are carried out for the every scan line, not every edge pixel, and extracting maxima in Hough space is executed by parallel comparing. Moreover, variously weighted voting achieves more accurate line extraction in spite of the quantization error and noise in the image space. In the implementation, the CAM acts as a PE (processing-element) array that effectively performs highly parallel processing for the Hough transform and also as a memory for two-dimensional Hough space, and both voting and peak extraction are directly executed by the CAM. Evaluations of CAM hardware size, processing time and the accuracy of line extraction show that a real-time and high-resolution Hough transform for a 256256 picture can be achieved using a single CAM chip with current VLSI technology. This CAM-based Hough transform algorithm promises to be an important step towards the realization of a real-time and compact image-understanding system. Received: 15 August 1998 / Accepted: 15 March 2000     

氧化物冶金技术的最新进展及其实践

文中介绍了氧化物冶金技术提出的背景,该技术的主要内容和采用该技术对钢的组织、性能的影响.总结了该技术近十几年来在利用夹杂物钉扎晶粒的高温长大和形核晶内铁素体(特别是其机理探讨)方面的相关研究,介绍了国外一些钢铁公司在大线能量焊接过程中所开发的该领域的新技术和新应用,同时介绍了氧化物冶金技术在焊接以外的凝固、压力加工、非调质钢和厚板生产等过程中的研究和应用的最新进展.文末展望了该技术的发展趋势.     

Production of Lacto-N-biose I Using Crude Extracts of Bifidobacterial Cells

Lacto-N-biose I (LNB) is supposed to represent the bifidus factor in human milk oligosaccharides, and can be practically produced from sucrose and GlcNAc using four bifidobacterial enzymes, 1,3-β-galactosyl-N-acetylhexosamine phosphorylase, sucrose phosphorylase, UDP-glucose-hexose 1-phosphate uridylyltransferase, and UDP-glucose 4-epimerase, recombinantly produced by Escherichia coli. Here the production of LNB by the same enzymatic method without using genetically modified enzymes to consider the use of LNB for a food ingredient was reported. All four enzymes were produced as the intracellular enzymes of Bifidobacterium strains. The mixture of the crude extracts contained all four enzymes, with other enzymes interfering with the LNB production, namely, phosphoglucomutase, fructose 6-phosphate phosphoketolase, and glycogen phosphorylase. The first two interfering enzymes were selectively inactivated by heat treatment at 47 °C for 1 h in the presence of pancreatin, and glycogen phosphorylase was disabled by hydrolyzing its possible acceptor molecules using glucoamylase. Finally, 91 % of GlcNAc was converted into LNB in the 100-mL reaction mixture containing 300 mM GlcNAc.     

Two-group interfacial area transport equations at bubbly-to-slug flow transition

In relation to nuclear reactor accident and safety studies, experiments on hot-leg U-bend two-phase natural circulation in a loop with a relatively large diameter pipe (10.2 cm inner diameter) were performed for understanding the two-phase natural circulation and flow termination during a small break loss of coolant accident in LWRs. The loop design was based on the scaling criteria developed under this program and the loop was operated either in a natural circulation mode or in a forced circulation mode using nitrogen gas and water. Various tests were carried out to establish the basic mechanism of the flow termination as well as to obtain essential information on scale effects of various parameters such as the loop frictional resistance, thermal center and pipe diameter. The void distribution in a hot-leg, flow regime and natural circulation rate were measured in detail for various conditions. The termination of the natural circulation occurred when there was insufficient hydrostatic head in the downcomer side. The superficial gas velocity at the flow termination could be predicted well by the simple model derived from a force balance between the frictional pressure drop along the loop and the hydrostatic head difference. The bubbly-to-slug flow transition was found to be dependent on axial locations. It turned out that the formation of cap bubbles in the large diameter pipe caused the increased drift velocity, which would affect the prediction of the void fraction in the hot leg.     

新一代超小型DIP-IPM

为了满足空调、洗衣机、冰箱等白色家电对高效、高性能的需要,三菱电机开发了新一代超小型第四代(Ver.4)双列直插封装的智能功率模块(Dual-In-linePackageIntelligentPowerModule,简称DIP-IPM)。本文首先分析了第四代超小型DIP-IPM内部电路的构成和功能,然后详细介绍了第四代DIP-IPM生产过程中的关键技术,包括无铅化、高热传导性绝缘片、chip-to-chip导线直接连接以及ASIC技术,最后与第三代(Ver.3)DIP-IPM进行了比较。     

Fine-Grained Silicon Carbide Ceramics with Oxynitride Glass

By using an oxynitride glass composition from the Y-Mg-Si-Al-O-N system as a sintering additive, the effect of atmosphere on densification was investigated during the liquid-phase sintering of SiC, and the resulting microstructure and mechanical properties of the sintered and subsequently annealed materials were investigated. SiC ceramics that were densified with 10 wt% oxynitride glass showed higher sinterability in a nitrogen atmosphere. Oxynitride glass enlarged the stability region of β-SiC and suppressed β→ alpha phase transformation, which resulted in an equiaxed microstructure. Grain growth of fine-grained SiC in some extent (up to ∼300 nm) was beneficial in improving both room-temperature strength and toughness. The best results were obtained when the ceramics were hot-pressed at 1800°C for 1 h in a nitrogen atmosphere and subsequently annealed at 1900°C for 3 h in an argon atmosphere. The room-temperature flexural strength and fracture toughness of the material were 847 MPa and 3.5 MPa·m^1/2, respectively.