Performance evaluation of a water/silicone oil two‐phase partitioning bioreactor using Rhodococcus erythropolis T902.1 to remove volatile organic compounds from gaseous effluents

BACKGROUND: In the framework of biological processes used for waste gas treatment, the impact of the inoculum size on the start‐up performance needs to be better evaluated. Moreover, only a few studies have investigated the behaviour of elimination capacity and biomass viability in a two‐phase partitioning bioreactor (TPPB) used for waste gas treatment. Lastly, the impact of ethanol as a co‐substrate remains misunderstood. RESULTS: Firstly, no benefit of inoculation with a high cellular density (>1.5 g L^?1) was observed in terms of start‐up performance. Secondly, the TPPB was monitored for 38 days to characterise its behaviour under several operational conditions. The removal efficiency remained above 63% for an inlet concentration of 7 g isopropylbenzene (IPB) m^?3 and at some time points reached 92% during an intermittent loading phase (10 h day^?1), corresponding to a mean elimination capacity of 4 × 10^?3 g L^?1 min^?1 (240 g m^?3 h^?1) for a mean IPB inlet load of 6.19 × 10^?3 g L^?1 min^?1 (390 g m^?3 h^?1). Under continuous IPB loading, the performance of the TPPB declined, but the period of biomass acclimatisation to this operational condition was shorter than 5 days. The biomass grew to approximately 10 g L^?1 but the cellular viability changed greatly during the experiment, suggesting an endorespiration phenomenon in the bioreactor. It was also shown that simultaneous degradation of IPB and ethanol occurred, suggesting that ethanol improves the biodegradation process without causing oxygen depletion. CONCLUSION: A water/silicone oil TPPB with ethanol as co‐substrate allowed the removal of a high inlet load of IPB during an experiment lasting 38 days. Copyright © 2008 Society of Chemical Industry     

Photoelectrocatalytic humic acid degradation kinetics and effect of pH,applied potential and inorganic ions

This study addresses the removal of humic acid (HA) dissolved in an aqueous medium by a photoelectrocatalytic process. UV₂₅₄ removal and the degradation of color (Vis₄₀₀) followed pseudo‐first order kinetics. Rate constants were 1.1 × 10^?1 min^?1, 8.3 × 10^?2 min^?1 and 2.49 × 10^?2 min^?1 (R² > 0.97) for UV₂₅₄ degradation and 1.7 × 10^?1 min^?1, 6.5 × 10^?2 min^?1 and 2.0 × 10^?2 min^?1 for color removal from 5 mg dm^?3, 10 mg dm^?3 and 25 mg dm^?3 HA respectively. Following a 2 h irradiation time, 96% of the color, 98% of the humic acid and 85% of the total organic carbon (TOC) was removed from an initial 25 mg dm^?3 HA solution in the photoanode cell. Photocatalytic removal on the same photoanode was also studied in order to compare the two methods of degradation. Results showed that the photoelectrocatalytic method was much more effective than the photocatalytic method especially at high pH values and with respect to UV₂₅₄ removal. The effect of other important reaction variables, eg pH, external potential and electrolyte concentration, on the photoelectrocatalytic HA degradation was also studied. Copyright © 2003 Society of Chemical Industry     

The MITRE E3 family of models structure and results

A family of energy/economic/environmental (E³) models is presented as a mechanism for analysing national policy issues. The family consists of discrete models which are designed to be run in an integrated manner. The outputs of certain models provide the inputs to the next. This structure allows the analyst to readily incorporate an understanding of regional factors such as local energy prices, concerns over air quality, water availability, or attitudes towards construction of new energy facilities, into national assessments of energy policies. This paper reviews the analytic framework within which energy policy issues are currently addressed. The initial family of E³ models is described with the emphasis on the data linkages and feedback which are provided when these models are run sequentially. The ongoing MITRE research programme with the E³ family of models is presented and plans and opportunities for future work are outlined.     

Pyramid collaborative filtering technique for an intelligent autonomous guide agent

This article presents an autonomous guide agent that can observe a community of learners on the web, interpret the learners' inputs, and then assess their sharing. The goal of this agent is to find a reliable helper (tutor or other learner) to assist a learner in solving his task. Despite the growing number of Internet users, the ability to find helpers is still a challenging and important problem. Although helpers could have much useful information about courses to be taught, many learners fail to understand their presentations. For that, the agent must be able to deal autonomously with the following challenges: Do helpers have information that the learners need? Will helpers present information that learners can understand? And can we guarantee that these helpers will collaborate effectively with learners? We have developed a new filtering framework, called a pyramid collaborative filtering model, to whittle the number of helpers down to just one. We have proposed four levels for the pyramid. Moving from one level to another depends on three filtering techniques: domain model filtering, user model filtering, and credibility model filtering. A new technique is filtering according to helpers' credibilities. Our experiments show that this method greatly improves filtering effectiveness. © 2007 Wiley Periodicals, Inc. Int J Int Syst 22: 1065–1082, 2007.     

Biological vulnerability to alcoholism.

This article reviews the role of biological factors in the risk for alcoholism. The discussion notes the importance of the definition of primary alcoholism and highlights data indicating that this disorder is genetically influenced. The major emphasis is on studies of men at high risk for the future development of alcoholism. The most promising trait markers of a biological vulnerability to alcoholism include a decreased intensity of reaction to modest ethanol doses for sons of alcoholics compared with control subjects, a decreased amplitude of certain brain waves of the event-related potential, and a different pattern of background cortical electroencephalograms for young men at high risk for future alcoholism. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Modeling of submicrometer gate GaAs field effect transistors

Before describing the mainFet modelings today available, the main technological evolutions ofMesfet andTegfet are summarized. It is brought some information on the various physical effects that occur in the devices and that must be taken into account in the models. It is shown that the different kinds of modelings (Monte Carlo, two dimensional, one dimensional) constitute a continuous chain, where the different elements appear strictly complementary. Finally, the present situation concerning modeling ofMesfet andTegfet will be presented.     

Pressureless sintering of boron carbide with an addition of polycarbosilane

Boron carbide B _x C (x 4) is pressureless sintered with an addition of both polycarbosilane and a small amount of phenolic resin. After testing many green mixtures, it was found that it was necessary to have a minimal addition of carbon which could denxydize the B _x C and also a second phase (SiC in this work) which could act in inhibiting grain coarsening. The resulting B _x C ceramics have high relative density ( 92% theoretical density) and contain no free carbon and a small amount of SiC (about 5 wt%).     

Probabilistic motion-compensated prediction in distributed video coding

Distributed video coding (DVC) constitutes an original coding framework to meet the stringent requirements imposed by uplink-oriented and low-power mobile video applications. The quality of the side information available to the decoder and the efficiency of the employed channel codes are primary factors determining the success of a DVC system. This contribution introduces two novel techniques for probabilistic motion compensation in order to generate side information at the Wyner-Ziv decoder. The employed DVC scheme uses a base layer, serving as a hash to facilitate overlapped block motion estimation at the decoder side. On top of the base layer, a supplementary Wyner-Ziv layer is coded in the DCT domain. Both proposed probabilistic motion compensation techniques are driven by the actual correlation channel statistics and reuse information contained in the hash. Experimental results report significant rate savings caused by the novel side information generation methods compared to previous techniques. Moreover, the compression performance of the presented DVC architecture, featuring the proposed side-information generation techniques, delivers state-of-the-art compression performance.