Complex formation of montmorillonite clay with polymers. Part 2: The use of montmorillonite clay–vinyl monomer complex as a comonomer in the copolymerization reaction of styrene–acrylonitrile monomers

The bulk copolymerization of styrene–acrylonitrile monomers using styrene‐N⁺–montmorillonite complex as a comonomer in the polymerization was studied. The X‐ray diffraction (XRD) analysis showed that part of the styrene‐N⁺–montmorillonite complex remained non‐dispersed (immiscible) and the copolymer was excluded from the interlayer of the immiscible part of the clay. The successive chemical extraction process revealed that a reasonable amount of the styrene–acrylonitrile copolymer was directly attached to the styrene‐N⁺–montmorillonite complex and enveloped the clay. Highly exfoliated clay lamella and nanospheres (3–5 nm) were observed by transmission electron microscopy (TEM). The montmorillonite clay assume two different morphologies, immiscible and exfoliated, on the basis of the XRD and TEM data. A simple method of calculation of the ratio of the exfoliated/immiscible amounts of the clay indicated that the amount of the styrene‐N⁺–montmorillonite complex exfoliated into separate lamella was 40 % (w/w) of the amount of the clay samples containing 2 % of the (styrene‐N⁺–montmorillonite complex) clay. This amount of exfoliated clay decreases with the increase of the concentration of the clay. The presence of the styrene‐N⁺–montmorillonite clay in the copolymerization reaction had a minor effect on both the copolymer composition and the molecular weight. Modification of the clay with the derivatized styrene monomer can achieve a nanocomposite using a percentage no more than 4 % (w/w) of complex in the copolymer. Copyright © 2004 Society of Chemical Industry     

Densification and Properties of α-Silicon Carbide

Densification of a-Sic powders with no premixed sintering aids (type 1) and with premixed B and C (type 2) was investigated by sintering them at 2150° to 2200°C for 30 min. Flexure strengths, Weibull moduli, and fracture flaws were characterized for type 2 α-SiC only. The results were compared with those for a state-of-the-art sintered a-Sic material.     

Planning prompts and indexed terms in textbook search tasks.

Text search is a type of strategic reading that involves locating specific goal-relevant information. Previous research has indicated that college and high school students often exhibit inefficient or unsuccessful text-search performance. Consequently, the effects of 2 manipulations on text-search performance were investigated: (1) the presence of indexed terms in a text-search task and (2) the use of a planning prompt before beginning a task. 34 college students engaged in 6 text-search tasks. Half of these tasks contained terms that could be used in an index; half required that a search term be generated. Half of the subjects were randomly assigned to a prompt condition in which they were prompted to plan their search before beginning each task. The results indicated that a planning prompt raised the success level of search performance, as did the presence of terms that were searchable in the textbook's index. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A comparative study of short nylon fiber—Natural rubber composites prepared from dry rubber and latex masterbatch

A novel method for the preparation of short nylon fiber–natural rubber composites was developed in which short fibers chopped to approximately 6 mm were incorporated in the latex stage and processed into sheet form. By this method, mixing cycle time was reduced without compromising the fiber dispersion. Fiber breakage during mixing was reduced. The new composites when compounded with a dry bonding system based on hexamethylenetetramine, resorcinol and hydrated silica (HRH) showed improved modulus, tensile strength and abrasion resistance compared to conventional composites. Tear strength, resilience, and compression set were similar to the conventional composites. SEM analysis indicated better interaction between matrix and fibers in the case of latex master batch. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polyamide-6,6/in situ silica hybrid nanocomposites by sol-gel technique: synthesis, characterization and properties

The organic-inorganic hybrid nanocomposites comprising of poly(iminohexamethyleneiminoadipoyl), better known as Polyamide-6,6 (abbreviated henceforth as PA66), and silica (SiO₂) were synthesized through sol-gel technique at ambient temperature. The inorganic phase was generated in situ by hydrolysis-condensation of tetraethoxysilane (TEOS) in different concentrations, under acid catalysis, in presence of the organic phase, PA66, dissolved in formic acid. Infrared (IR) spectroscopy was used to monitor the microstructural evolution of the silica phase in the PA66 matrix. Wide angle X-ray scattering (WAXS) studies showed that the crystallinity in PA66 phase decreased with increasing silica content. Atomic force microscopy (AFM) of the nanocomposite films revealed the dispersion of SiO₂ particle with dimensions of <100 nm in the form of network as well as linear structure. X-ray silicon mapping further confirmed the homogeneous dispersion of the silica phase in the bulk of the organic phase. The melting peak temperatures slightly decreased compared to neat PA66, while an improvement in thermal stability by about 20 °C was achieved with hybrid nanocomposite films, as indicated by thermogravimetric analysis (TGA). Dynamic mechanical analysis (DMA) exhibited significant improvement in storage modulus (E′) for the hybrid nanocomposites over the control specimen. An increase in Young's modulus and tensile strength of the hybrid films was also observed with an increase in silica content, indicating significant reinforcement of the matrix in the presence of nanoparticles. Some properties of the in situ prepared PA66-silica nanocomposites were compared with those of conventional composites prepared using precipitated silica as the filler by solution casting from formic acid.     

A Comparative Investigation of Optical and Structural Properties of Cu-Doped CdO-Derived Nanostructures

In this report, we studied various structural and optical properties of pure and copper-doped cadmium oxide (CdO) thin films. Nanostructured Cu-doped CdO films were deposited using sol–gel spin-coating technique. The structural and morphological changes have been observed by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and atomic force microscopy (AFM) studies. The optical and electrical properties of the pure and Cu-doped CdO thin films were studied by UV–vis spectroscopy and four-point probe method, respectively. The XRD peaks show the formation of nanocrystalline CdO with cubic face-centered crystal structure. The band gaps of the as deposited films were found in the range of 2.32–2.73 eV, while after doping, it decreases due to structural deformation. The electrical resitivity was found to decrease approximately ～10 in Cu-doped CdO thin films.     

Synthesis and Biological Evaluation of Small Molecules as Potential Anticancer Multitarget Agents

Twenty-six triazole-based derivatives were designed for targeting both PD-L1 (programmed death receptor ligand 1) and VEGFR-2 (vascular endothelial growth factor receptor 2). These compounds were synthetized and biologically evaluated as multitarget inhibitors of VEGFR-2, PD-L1 and c-Myc proteins. The antiproliferative activity of these molecules on several tumor cell lines (HT-29, A-549, and MCF-7) and on the non-tumor cell line HEK-293 was determined. The effects on the abovementioned biological targets were evaluated for some selected compounds. Compound 23, bearing a p-chlorophenyl group, showed better results than sorafenib in regard to the downregulation of VEGFR-2 and a similar effect to BMS-8 on both PD-L1 and c-Myc proteins. The antiangiogenic and antivascular activities of chloro derivatives were also established by endothelial microtube formation assay on Matrigel^®.     

OVSF Code Sharing and Reducing the Code Wastage Capacity in WCDMA

The non quantized nature of user rate wastes the code capacity in Orthogonal Variable Spreading Factor Codes (OVSF) based Code Division Multiple Access (CDMA) systems. The code sharing scheme in multi code CDMA is proposed to minimize the code rate wastage. The scheme combines the unused (wastage) capacity of already occupied codes to reduce the code blocking problem. Simulation results are presented to show the superiority of the proposed code assignment scheme as compared to existing schemes.

Distributed Arithmetic based Split-Radix FFT

In this paper we have designed a Split-radix type FFT unit without using multipliers. All the complex multiplications required for this type of FFT are implemented using Distributed Arithmetic (DA) technique. A method is incorporated to overcome the result overflow problem introduced by DA method. Proposed FFT architecture is implemented in 180 nm CMOS technology at a supply voltage of 1.8 V.