Asymptotic solvers for second-order differential equation systems with multiple frequencies

In this paper, an asymptotic expansion is constructed to solve second-order differential equation systems with highly oscillatory forcing terms involving multiple frequencies. An asymptotic expansion is derived in inverse of powers of the oscillatory parameter and its truncation results in a very effective method of dicretizing the differential equation system in question. Numerical experiments illustrate the effectiveness of the asymptotic method in contrast to the standard Runge–Kutta method.     

Fabricating Strong and Stiff Bioplastics from Whole Spirulina Cells

Since the 1950s, 8.3 billion tonnes (Bt) of virgin plastics have been produced, of which around 5 Bt have accumulated as waste in oceans and other natural environments, posing severe threats to entire ecosystems. The need for sustainable bio-based alternatives to traditional petroleum-derived plastics is evident. Bioplastics produced from unprocessed biological materials have thus far suffered from heterogeneous and non-cohesive morphologies, which lead to weak mechanical properties and lack of processability, hindering their industrial integration. Here, a fast, simple, and scalable process is presented to transform raw microalgae into a self-bonded, recyclable, and backyard-compostable bioplastic with attractive mechanical properties surpassing those of other biobased plastics such as thermoplastic starch. Upon hot-pressing, the abundant and photosynthetic algae spirulina forms cohesive bioplastics with flexural modulus and strength in the range 3–5 GPa and 25.5–57 MPa, respectively, depending on pre-processing conditions and the addition of nanofillers. The machinability of these bioplastics, along with self-extinguishing properties, make them promising candidates for consumer plastics. Mechanical recycling and fast biodegradation in soil are demonstrated as end-of-life options. Finally, the environmental impacts are discussed in terms of global warming potential, highlighting the benefits of using a carbon-negative feedstock such as spirulina to fabricate plastics.     

Fluorescent polyacrylate derivate from 4-biphenylmethanol with UV-green emission

In this paper we report the synthesis of a new polyacrylate named poly(1,1?-BP4MA) which is a derivate from 4-biphenylmethanol monomer. Poly(1,1?-BP4MA) was obtained by solution and bulk polymerization techniques to yield polymers with high molecular weight and high solubility. The study of the optical properties showed that poly(1,1?-BP4MA) is a fluorescent material with emission in the UV-green region and it has similar quantum yield to tryptophan.     

Manipulating the Level of Sensorimotor Stimulation during LI-rTMS Can Improve Visual Circuit Reorganisation in Adult Ephrin-A2A5-/- Mice

Repetitive transcranial magnetic stimulation (rTMS) is a non-invasive brain stimulation technique that has the potential to treat a variety of neurologic and psychiatric disorders. The extent of rTMS-induced neuroplasticity may be dependent on a subject’s brain state at the time of stimulation. Chronic low intensity rTMS (LI-rTMS) has previously been shown to induce beneficial structural and functional reorganisation within the abnormal visual circuits of ephrin-A2A5^-/- mice in ambient lighting. Here, we administered chronic LI-rTMS in adult ephrin-A2A5^-/- mice either in a dark environment or concurrently with voluntary locomotion. One day after the last stimulation session, optokinetic responses were assessed and fluorescent tracers were injected to map corticotectal and geniculocortical projections. We found that LI-rTMS in either treatment condition refined the geniculocortical map. Corticotectal projections were improved in locomotion+LI-rTMS subjects, but not in dark + LI-rTMS and sham groups. Visuomotor behaviour was not improved in any condition. Our results suggest that the beneficial reorganisation of abnormal visual circuits by rTMS can be significantly influenced by simultaneous, ambient visual input and is enhanced by concomitant physical exercise. Furthermore, the observed pathway-specific effects suggest that regional molecular changes and/or the relative proximity of terminals to the induced electric fields influence the outcomes of LI-rTMS on abnormal circuitry.     

Hydrogen evolution reaction measurements of dealloyed porous NiCu

Porous metals are of interest for their high surface area and potential for enhanced catalytic behavior. Electrodeposited NiCu thin films with a range of compositions were electrochemically dealloyed to selectively remove the Cu component. The film structure, composition, and reactivity of these samples were characterized both before and after the dealloying step using scanning electron microscopy, energy-dispersive spectroscopy, and electrochemical measurements. The catalytic behavior of the dealloyed porous Ni samples towards the hydrogen evolution reaction was measured and compared to that of the as-deposited samples. The dealloyed samples were generally more reactive than their as-deposited counterparts at low overpotentials, making the dealloying procedure a promising area of exploration for improved hydrogen evolution catalysts.     

Hot metal pretreatment by powder injection of lime‐based reagents

A mathematical model earlier proposed has been improved to predict the kinetics of multicomponent reactions in the hot metal pretreatment through the injection of reactive fluxes. It is assumed that there are two reaction zones along the flux injection operation: a transitory reaction between the rising particles and the bulk metal, and the permanent reaction between the metal and the top slag. A criterion to estimate the fraction of solids which will react with molten iron in a three‐phase jet (gas‐solid‐liquid) was considered; this fraction of solids carries out the transitory reaction. The model also takes into account the thermodynamic changes produced in the metal and slag due to the chemical reactions. Calculated results of the model are in good agreement with experimental results for the desulfurization of hot metal through the injection of CaO‐SiO₂‐CaF₂‐FeO‐Na₂O reagents at 1400 ‐ 1450 °C. Two kinds of hot metal were tested, one with a low carbon mass content of 3 % and the other with a high carbon mass content of 4.5 %.     

Ozone application in a modified screw conveyor to treat grain for insect pests, fungal contaminants, and mycotoxins

Recent efforts have focused on improving the application of ozone technology as a pest management tool for stored grain. This study evaluated the efficacy of a modified screw conveyor to treat grain with ozone in a continuous-flow system. The ozone concentration delivered into the screw conveyor was 47,800 ppm and the average retention time for a corn kernel moving through the system was 1.8 min. Under these conditions, 100% mortality of adult red flour beetle (Tribolium castaneum (Herbst)) and adult maize weevil (Sitophilus zeamais (Motsch.)) was achieved after three passes through the screw conveyor, which equated to a concentration × time (CT) product value of 258,120 ppm-min. The potential effectiveness of the continuous treatment to reduce mold on the surface of corn kernels was also explored. Aspergillus flavus counts were reduced by 96% in a single pass through the screw conveyor. Three passes through the screw conveyor reduced the mold count by more than 2-log units. Ozone treatment also reduced aflatoxin applied to the grain; however, the reduction was not sufficient enough to be of commercial value. The results of this study provide valuable information for estimating the parameters needed for effectively treating grain in a commercial scale continuous-flow treatment system.