Imaging of the optic disc and retinal nerve fiber layer: the effects of age, optic disc area, refractive error, and gender.

We cross-sectionally examined the relationship between age, optic disc area, refraction, and gender and optic disc topography and retinal nerve fiber layer (RNFL) measurements, using optical imaging techniques. One eye from each of 155 Caucasian subjects (age range 23.0-80.8 y) without ocular pathology was included. Measurements were obtained by using the Heidelberg Retina Tomography (HRT), the GDx Nerve Fiber Analyzer, and the Optical Coherence Tomograph (OCT). The effects of age were small (R2 < 17%) and were limited to specific HRT, GDx, and OCT parameters. Disc area was significantly associated with most HRT parameters and isolated GDx and OCT parameters. Refraction and gender were not significantly associated with any optic disc or RNFL parameters. Although effects of age on the optic disc and RNFL are small, they should be considered in monitoring ocular disease. Optic disc area should be considered when cross-sectionally evaluating disc topography and, to a lesser extent, RNFL thickness.     

Compatibility of polysaccharide/maleic copolymer blends. IV. Thermal behavior of hydroxypropyl cellulose‐containing blends

The compatibility of the hydroxypropyl cellulose (HPC) with maleic acid–vinyl acetate copolymer in the solid state was studied by thermogravimetry, thermo‐optical analysis, differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and optical microscopy. It was established that physical interactions are prevalent in blends with a high content of HPC, whereas chemical interactions predominate in blends with a medium and low content of HPC. By increasing the temperature, the thermochemical reactions are favored. Thermal properties are dependent on the mixing ratio of the components. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2585–2597, 2003     

Enzymatic degradation of thermoresponsive poly(N‐isopropylacrylamide) grafted to carboxymethylcellulose copolymers

The enzymatic degradation of poly(N‐isopropyl acrylamide) (PNIPAM) grafted to carboxymethylcellulose (CMC) copolymers with a cellulasic preparation (Trichoderma viride) was studied. The enzymatic activity of the cellulasic preparation against CMC and the grafted copolymers was determined by the Petterson–Porath method, while their reduced viscosity variation in the presence of the same preparation was also followed. It has been shown that the enzymatic degradation behavior depends on the copolymer composition and the reaction temperature. Reducing sugars analysis showed that the experimental values for the grafted copolymers were higher than the calculated ones. At 50°C, the enzymatic reaction is completed in about 20 min for the copolymers, whereas for CMC it takes more than 40 min. It can be concluded that their enzymatic degradation is facilitated by the presence of the PNIPAM grafts. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1383–1386, 2003     

PShare: Ensuring location privacy in non-trusted systems through multi-secret sharing

Location-based applications such as Facebook Places, Foursquare, or Loopt typically use location services to manage mobile object positions. However, exposing precise user positions raises user privacy concerns, especially if location service providers are not fully trusted. To enable the secure management of private user positions in non-trusted systems, we present two novel position sharing approaches based on the concept of multi-secret sharing. We improve existing geometric position sharing approaches by Dürr et al. [2] and Skvortsov et al. [3] by considering continuous position updates and by increasing the robustness against various attacks. Furthermore, we present the first position sharing approach for symbolic location models.     

Ultraviolet photodetectors and readout based on a-IGZO semiconductor technology

In this work, real-time ultraviolet photodetectors are realized through metal–semiconductor–metal (MSM) structures. Amorphous indium gallium zinc oxide (a-IGZO) is used as semiconductor material and gold as metal electrodes. The readout of an individual sensor is implemented by a transimpedance amplifier (TIA) consisting of an all-enhancement a-IGZO thin-film transistor (TFT) operational amplifier and a switched capacitor (SC) as feedback resistance. The photosensor and the transimpedance amplifier are both manufactured on glass substrates. The measured photosensor possesses a high responsivity R , a low response time t _{R E S} , and a good noise equivalent power value NEP .     

Modelling and condition-based control of a flexible and hybrid disassembly system with manual and autonomous workstations using reinforcement learning

Journal of Intelligent Manufacturing - Remanufacturing includes disassembly and reassembly of used products to save natural resources and reduce emissions. While assembly is widely understood in...     

Localized Synthesis of Iron Oxide Nanowires and Fabrication of High Performance Nanosensors Based on a Single Fe2O3 Nanowire

A composed morphology of iron oxide microstructures covered with very thin nanowires (NWs) with diameter of 15–50 nm has been presented. By oxidizing metallic Fe microparticles at 255 °C for 12 and 24 h, dense iron oxide NW networks bridging prepatterned Au/Cr pads are obtained. X‐ray photoelectron spectroscopy studies reveal formation of α‐Fe₂O₃ and Fe₃O₄ on the surface and it is confirmed by detailed high‐resolution transmission electron microscopy and selected area electron diffraction (SAED) investigations that NWs are single phase α‐Fe₂O₃ and some domains of single phase Fe₃O₄. Localized synthesis of such nano‐ and microparticles directly on sensor platform/structure at 255 °C for 24 h and reoxidation at 650 °C for 0.2–2 h, yield in highly performance and reliable detection of acetone vapor with fast response and recovery times. First nanosensors on a single α‐Fe₂O₃ nanowire are fabricated and studied showing excellent performances and an increase in acetone response by decrease of their diameter was developed. The facile technological approach enables this nanomaterial as candidate for a range of applications in the field of nanoelectronics such as nanosensors and biomedicine devices, especially for breath analysis in the treatment of diabetes patients.     

Recovering the initial state of an infinite-dimensional system using observers

Let A be the generator of a strongly continuous semigroup T on the Hilbert space X, and let C be a linear operator from D(A) to another Hilbert space Y (possibly unbounded with respect to X, not necessarily admissible). We consider the problem of estimating the initial state z₀∈D(A) (with respect to the norm of X) from the output function y(t)=CT_tz₀, given for all t in a bounded interval [0,τ]. We introduce the concepts of estimatability and backward estimatability for (A,C) (in a more general way than currently available in the literature), we introduce forward and backward observers, and we provide an iterative algorithm for estimating z₀ from y. This algorithm generalizes various algorithms proposed recently for specific classes of systems and it is an attractive alternative to methods based on inverting the Gramian. Our results lead also to a very general formulation of Russell’s principle, i.e., estimatability and backward estimatability imply exact observability. This general formulation of the principle does not require T to be invertible. We illustrate our estimation algorithms on systems described by wave and Schrödinger equations, and we provide results from numerical simulations.