Reliability and scale effect in toughness of concrete structures

In the present work, the distribution of the random toughness characteristics (i.e. critical energy release rate, G_1c) has been evaluated on the basis of experimental observations. Fracture test results from three groups of geometrically similar concrete specimens of size (width×total depth×thickness), 420×420×50–1680×1680×200 mm³, made with different maximum aggregate size of 9.5, 19, 38, and 76 mm were analyzed using a recently proposed distribution of extremes. In applications of probability, it is important to use an appropriate distribution type and adequate techniques for estimating the parameters of distribution. In this study, a new type distribution of minima is employed for probability computations. It was noticed that the entropy of distribution increases with the crack length, i.e. the uncertainty of toughness, G_1c, value increases with crack length. A non-linear reduction of the maximum allowable splitting force with the defect size, a, was noticed. For large specimens, the maximum allowable splitting load is more sensitive to the required reliability level than that for small specimens. Reliability increases with aggregate size when all other conditions were constant.     

Vibration of clamped moderately thick general cross-ply plates using a generalized Navier approach

A hitherto unavailable analytical solution to the free vibration problem of general cross-ply laminated rigidly clamped rectangular plates, incorporating first-order shear deformation, and rotatory and in-plane inertias into the formulation, is presented. A recently developed boundary continuous displacement-based generalized Navier solution technique is used to solve the five highly coupled linear second-order partial differential equations with constant coefficients, and the associated geometric boundary conditions. The assumed solution functions are in the form of double Fourier series, which satisfy the rigidly clamped boundary conditions a priori in a manner similar to the conventional Navier method. Convergence characteristics of the natural frequencies of both symmetric and antisymmetric cross-ply plates are numerically established. Other numerical results presented herein include (i) comparison with the corresponding available first-order shear deformation theory-based Galerkin and classical lamination theory-based boundary-discontinuous analytical solutions, and (ii) study of the effects of thickness and aspect ratio on the natural frequencies.     

Impulse breakdown voltages of triggered multistage vacuum gap

Several sealed-off triggered vacuum gaps are connected in series to improve hold-off voltage. The characteristics of impulse breakdown voltage of these series-connected gaps are investigated experimentally. The sum hold-off voltage of series-connected gaps decreases to a unit hold-off voltage when the maximum value of voltage division ratio across the gaps increases to unity. Self-breakdown probability of the series-connected gaps is always higher than that of a single gap under the same conditions. Hence, stage efficiency of the multistage gap decreases with increasing number of stages. Its value is 90 percent with 2-stage gap and 75 percent with 5-stage gap, respectively, under the same voltage division ratio and the same gap length (2.0 mm) in each stage. Triggered breakdown voltage of 2- or 3- stage gap is several hundred volts when all gaps are triggered simultaneously at the peak of the main impulse wave and a working voltage range is nearly 100 percent in this case. The working voltage range decreases with number of stages. Its value is 45 percent with 3-stage gap and 15 percent with 5-stage gap, respectively, when one triggered gap is fired for switching.     

Proposal for st-Routing Protocol

A routing protocol chooses one of the several paths (routes) from a source node to a destination node in the computer network, to send a packet of information. In this paper, we propose a new routing protocol, which we call st-routing protocol, based on st-numbering of a graph. The protocol fits well in noisy environments where robustness of routing using alternative paths is a major issue. The proposed routing protocol provides a systematic way to retry alternative paths without generating any duplicate packets. The protocol works for only those networks that can be represented by biconnected graphs.     

Erosion rate correlations of a pipe protruded in an abrupt pipe contraction

Erosion is one of the most serious problems in various gas and liquid flow passages such as flow in pipes, pumps, turbines, compressors and many other devices. Sand presence causes loss of pipe wall thickness that can lead to pipe erosion, frequent failures and loss of expensive production time. The importance of this problem is mainly due to many related engineering applications, viz. heat exchangers. In order to reduce the frequency of such pipe erosions, caps in the form of replaceable pipes are protruded in the sudden contraction regions which are exposed to most of the serious erosion rates. In the present work, numerical investigation of the erosion of a pipe protruded in a sudden contraction is presented. The turbulent, steady, 2-D axi-symmetric flow inside an axi-symmetric abrupt contraction pipe with a pipe protrusion embedded in it was solved by steady-state time averaged conservation equations of mass and momentum along with two equation model for turbulence. Particles are tracked using Lagrangian particle tracking. An erosion model was employed to investigate the erosion phenomena for the given geometry. The influence of the different parameters such as the inlet flow velocity (3–10 m/s), the particle diameter (10–400 μm), the protruded pipe geometry (thickness T=1–5 mm and depth H=2–5 mm) and the pipe contraction ratio (Cr=0.25–0.5) on the erosion of pipe protrusion was investigated. Correlations for the influence of inlet flow velocity, depth and thickness of the protruded pipe on the erosion rate are presented.     

Simulation of an integrated age replacement and spare provisioning policy using SLAM

This paper presents a SLAM simulation model for determining a jointly optimal age replacement and spare part provisioning policy. The policy, referred to as a stocking policy, is formulated by combining age replacement policy with a continuous review (s, S) type inventory policy, where s is the stock reorder level and S is the maximum stock level. The optimal values of the decision variables are obtained by minimizing the total cost of replacement and inventory. The simulation procedure outlined in the paper can be used to model any operating situation having either a single item or a number of identical items. Results from a number of case problems specifically constructed by 5-factor second order rotatory design have been presented and the effects of different cost elements, item failure characteristics and lead time characteristics have been highlighted. For all case problems, optimal (s, S) policies to support the Barlow-Proschan age policy have also been determined. Simulation results clearly indicate the separate optimizations of replacement and spare provisioning policies do not ensure global optimality when total system cost has to be minimized.     

A systematic review on emperor penguin optimizer

Neural Computing and Applications - Emperor Penguin Optimizer (EPO) is a recently developed metaheuristic algorithm to solve general optimization problems. The main strength of EPO is twofold....     

Development of GEP-based functional relationship for sediment transport in tropical rivers

This study presents gene expression programming (GEP), which is an extension to genetic programming (GP), as an alternative approach to modeling the functional relationships for the River Kurau, River Langat, and River Muda of the Malaysia. A functional relation has been developed using GEP with non-dimensional variables. The development of a GEP non-dimensional model is described. This paper compares current prediction equation with the existing GEP model for the same rivers (Zakaria et al. in Sci Total Environ 408:5078–5085, (2010). The presented model in this study is a less input GEP model and that predicts good performance. The proposed GEP approach gives satisfactory results compared to existing predictors.     

Carbon fiber from natural biopolymer Bombyx mori silk fibroin with iodine treatment

Carbon fibers were prepared from silk fibers after an iodine treatment and the carbon yield, fiber morphology, structure and mechanical properties were investigated. A single or multi-step carbonization process was used for the preparation. In the single step process, silk fibroin (SF) fibers were heated from 25 to 800 °C with a heating rate of 5 °C min⁻¹ under Ar atmosphere. However, the carbon fiber obtained was partially melted and was too fragile to handle. For better performance, SF fibers were treated with iodine vapor at 100 °C for 12 h and untreated and iodinated SF fibers were heated from 25 to 800 °C by a multi-step carbonization process, which was defined based on the optimum thermal degradation rate of silk. In this multi-step process, the carbon fibers obtained from iodinated SF were structurally intact and stable in appearance, and the carbon yield achieved was ca. 36 wt.%, much higher than the value for untreated SF. X-ray diffraction, Raman spectroscopy and transmission electron microscopic observation revealed that the obtained carbon fibers from both untreated and iodinated SFs had a basically amorphous structure. The strength of carbon fibers prepared from iodinated SF using the multi-step carbonization was considerably increased compared to that of untreated SF. According to viscoelastic measurement, by heating above 280 °C the iodine introduced intermolecular cross-linking of the SF, and its melt flow was inhibited which produced a higher yield and better performance of the carbon fiber.