IL-4- and IL-5-secreting lymphocyte populations are preferentially stimulated by parasite-derived antigens in human tissue invasive nematode infections

Helminth infections in humans and animals are associated with strong T helper 2 (Th2) responses. To determine whether parasite-derived Ag preferentially expand a Th2-like cell population, a filter immunoplaque assay was used to enumerate the frequencies (F0) of PBMC and CD4(+)-enriched PBMC from individuals with helminth infections secreting selected cytokines in response to parasite-derived (PAg) and nonparasite antigens (NPAg). In 20 individuals with lymphatic filariasis, frequency analysis of PBMC secreting IL-4 and IFN-gamma indicated that the F0 of PAg-specific IL-4-secreting cells (geometric mean F0 (GM): 1/12,100) was 57-fold higher than the corresponding F0 of NPAg-reactive cells (GM: 1/692,000; p < 0.02). In marked contrast, the F0 of IFN-gamma-secreting cells responding to PAg (GM: 1/2,700) did not differ from those of cells specific for NAPg (GM: 1/3,400; p = 0.83). In another group of helminth-infected individuals, the F0 of highly enriched CD4+ cells secreting IL-4 and IL-5 in response to PAg (GMs: 1/2,600 and 1/5,600 CD4+ cells, respectively) were also found to be significantly higher than those specific for NPAg (GMs: 1/291,000 and 1/303,000 CD4+; p < 0.05 and p < 0.01, respectively), whereas the corresponding F0 of IFN-gamma- and granulocyte-macrophage-CSF-secreting cells were equivalent for PAg and NPag. Furthermore, the proportion of PAg-specific IL-4- and IL-5-secreting CD4+ cells relative to all cells secreting the given cytokine were approximately 29-fold higher than the proportion of NPAg-specific cells secreting these cytokines. Again, the corresponding proportions of Ag-specific IFN-gamma-and GM-CSF-secreting CD4+ cells were equivalent for PAg and NPAg. Thus, in this ex vivo system, a circulating population of IL-4- and IL-5-secreting (Th2-like) cells has been shown to exist in humans; PAg appears to expand these cells preferentially.     

Mechanical and microstructure studies on the modification of CA film by blending with PS

DriedMusa paradiciaca (banana) stem and veins of the leaves, which were hitherto discarded as a waste, were collected and used as starting material for the preparation of cellulose and cellulose acetate. This cellulose acetate was mixed with polystyrene to form blend of cellulose acetate-polystyrene in order to provide enhanced stability and extended utility to the end products. The films of these composites or their individual partners were made separately and studied for their mechanical properties, chemical modification and morphological changes. We report here that banana stem is good source of cellulose and that cellulose completely undergoes modification upon esterification.     

High-power 1320-nm wafer-bonded VCSELs with tunnel junctions

A new long-wavelength vertical-cavity surface-emitting laser structure is described that utilizes AlGaAs-GaAs mirrors bonded to AlInGaAs-InP quantum wells with an intracavity buried tunnel junction. This structure offers complete wavelength flexibility in the 1250-1650 nm fiber communication bands and reduces the high free-carrier losses and bonded junction voltage drops in previous devices. The intracavity contacts electrically bypass the bonded junctions to reduce threshold voltage. N-type current spreading layers and undoped AlGaAs mirrors minimize optical losses. This has enabled 134/spl deg/C maximum continuous-wave lasing temperature, 2-mW room-temperature continuous-wave single-mode power, and 1-mW single-mode power at 80/spl deg/C, in various devices in the 1310-1340 nm wavelength range.     

Correction to the Fukuda-Kawata Young's modulus theory and the Fukuda-Chou strength theory for short fibre-reinforced composite materials

The theories for modulus and strength of short fibre-reinforced composite materials are based on the calculation of the force sustained by fibres crossing an arbitrary line perpendicular to the applied load, called the scan line, in a thin, rectangular specimen. The widely referenced Fukuda-Kawata modulus theory and the Fukuda-Chou strength theory are based on an apparently incorrect procedure for the calculation of the force sustained by the fibres crossing the scan line. The error is explained in detail by comparing the Fukuda-Kawata modulus theory and the Cox modulus theory. The magnitude of this error is calculated for specific cases.     

Oxide scale stresses in polycrystalline Ni200

An X-ray diffraction (sin² ψ) method has been successfully used to measure the oxidation stresses at room temperature in annealed and electropolished samples of polycrystalline Ni200 coupons oxidized in the temperature range 760 to 982° C for 4 h. The stresses on the free surface of the oxide (σ ₁₁ andσ ²²) were compressive and the average stress through the thickness normal to the oxide layer was found to be tensile. Surface stresses on the oxides formed at temperatures up to 927° C were found to be isotropic and both surface stresses and the average normal stress increased with increasing temperature of oxidation. At 982° C, the surface stresses were lower and this was attributed to the deformation and fracture of oxide layer resulting in stress relaxation.     

Electrochemical behaviour of Mn3+/Mn2+, Co3+/Co2+ and Ce4+/Ce4+ redox mediators in methanesulfonic acid

The redox behaviour of Mn³⁺/Mn²⁺, Co³⁺/Co²⁺ and Ce⁴⁺/Ce³⁺ mediators commonly used in indirect oxidation of organic compounds were evaluated in methane sulfonic acid on a glassy carbon working electrode employing cyclic voltammetry. Manganic methanesulfonate exhibits higher instability in dilute methanesulfonic acid. The solid MnO₂ formed during disproportionation on the glassy carbon electrode further affects the reproducibility. Cobaltic methanesulfonate formation occurs only at oxygen evolution region rendering the overall oxidation process less efficient. Ceric methane sulfonate formation is highly efficient over a wide acid concentration range. Ceric methanesulfonate can also be employed over a wide temperature range to oxidize different aromatic compounds.     

VOID FRACTION PROFILES IN PLANE-POISEUILLE FLOW OF VISCOELASTIC FOAMS

This investigation focuses on slow, isothermal, two-phase flow of gas bubble suspensions in Separan solutions, prepared with the help of a sodium borohydride blowing agent at room temperature. The total residence time in these experiments is much smaller than characteristic times for growth or rise of bubbles. The variation of bubble volume fraction across a narrow gap between two planes, is recorded at two locations along the flow direction. This is done with a Cesium gamma-radiation source focused on a region of area.012 cm² in the flow plane, and a Sodium iodide detector across the channel yielding a resolution of.01 over the range of void fractions investigated from.02 to.08. This measurement allows us to identify conditions under which the two-phase flow may be described by a two fluid model with a uniform bubbly core and a bubble free wall layer. With this two phase flow structure, a relative viscosity equation for the suspension is used to compute an apparent viscosity. Such calculations indicate that the observed reduction in apparent viscosity for the two phase flow may be attributed to a bubbly core which is more shear thinning than the medium. The additional shear thinning factor for the suspension is related to the elasticity of the medium.     

Optimal production of intermediate for zero—first and first—first order reaction sequences in fluidised bed reactors1

An analysis of zero—first and first—first order reaction schemes has been carried out in a fluidised bed with a view to optimising the production of intermediate R for a given bubble diameter. For the zero—first order reaction sequence, the gas residence time at which the maximum concentration of R occurs is shown to be fixed and independent of bubble size in the bed. On the other hand, for a first—first order reaction scheme, an optimum gas residence time exists for the concentration maximum to occur at the bed exit. This interaction between bubble diameter, gas residence time and maximum concentration of intermediate is resolved by recourse to a three dimensional diagram which optimises the production of intermediate for any given value of bubble diameter or gas residence time.     

Micro-computed tomography scanning approaches to quantify,parameterize and visualize bioturbation activity in clogged streambeds: A proof of concept

Fine particle clogging and faunal bioturbation are two key processes co-occurring in the hyporheic zone that potentially affect hyporheic exchange through modifications in the sediment structure of streambeds. Clogging results from excessive fine sediment infiltration and deposition in rivers, and it is known to decrease matrix porosity and potentially reduce permeability. Faunal bioturbation activity may compensate for the negative effect of clogging by reworking the sediment, increasing porosity, and preventing further infiltration of fines. Although both processes of clogging and bioturbation have received significant attention in the literature separately, their combined effects on streambed sediment structure are not well understood, mostly due to the lack of a standard methodology for their assessment. Here, we illustrate a novel methodology using X-ray computed tomography (CT), as proof of concept, to investigate how, together, clogging and bioturbation affect streambed porosity in a controlled flow-through flume. By visualising gallery formations of an upward conveyor macroinvertebrate; Lumbriculus variegatus as a model species, we quantified bioturbation activity in a clogged streambed, focusing on orientation, depth, and volume at downwelling and upwelling areas of the flume. Gallery creation increased the porosity of the streambed sediment, suggesting a potential improvement in permeability and a possible offset of clogging effects. We illustrate the promising use of X-ray CT as a tool to assess bioturbation in clogged streambeds, and the potential role of bioturbation activity supporting hyporheic exchange processes in streambeds, warranting further studies to understand the extent of bioturbation impacts in natural systems.     

Mixing matrix estimation using discriminative clustering for blind source separation

Mixing matrix estimation in instantaneous blind source separation (BSS) can be performed by exploiting the sparsity and disjoint orthogonality of source signals. As a result, approaches for estimating the unknown mixing process typically employ clustering algorithms on the mixtures in a parametric domain, where the signals can be sparsely represented. In this paper, we propose two algorithms to perform discriminative clustering of the mixture signals for estimating the mixing matrix. For the case of overdetermined BSS, we develop an algorithm to perform linear discriminant analysis based on similarity measures and combine it with K-hyperline clustering. Furthermore, we propose to perform discriminative clustering in a high-dimensional feature space obtained by an implicit mapping, using the kernel trick, for the case of underdetermined source separation. Using simulations on synthetic data, we demonstrate the improvements in mixing matrix estimation performance obtained using the proposed algorithms in comparison to other clustering methods. Finally we perform mixing matrix estimation from speech mixtures, by clustering single source points in the time-frequency domain, and show that the proposed algorithms achieve higher signal to interference ratio when compared to other baseline algorithms.