A review on fault detection and diagnosis techniques: basics and beyond

Safety and reliability are absolutely important for modern sophisticated systems and technologies. Therefore, malfunction monitoring capabilities are instilled in the system for detection of the incipient faults and anticipation of their impact on the future behavior of the system using fault diagnosis techniques. In particular, state-of-the-art applications rely on the quick and efficient treatment of malfunctions within the equipment/system, resulting in increased production and reduced downtimes. This paper presents developments within Fault Detection and Diagnosis (FDD) methods and reviews of research work in this area. The review presents both traditional model-based and relatively new signal processing-based FDD approaches, with a special consideration paid to artificial intelligence-based FDD methods. Typical steps involved in the design and development of automatic FDD system, including system knowledge representation, data-acquisition and signal processing, fault classification, and maintenance related decision actions, are systematically presented to outline the present status of FDD. Future research trends, challenges and prospective solutions are also highlighted.

     

Superparamagnetic particle dynamics and mixing in a rotating capillary tube with a stationary magnetic field

The dynamics of superparamagnetic particles subject to competing magnetic and viscous drag forces have been examined with a uniform, stationary, external magnetic field. In this approach, competing drag and magnetic forces were created in a fluid suspension of superparamagnetic particles that was confined in a capillary tube; competing viscous drag and magnetic forces were established by rotating the tube. A critical Mason number was determined for conditions under which the rotation of the capillary prevents the formation of chains from individual particles. The statistics of chain length was investigated by image analysis while varying parameters such as the rotation speed and the viscosity of the liquid. The measurements showed that the rate of particle chain formation was decreased with increased viscosity and rotation speed; the particle dynamics could be quantified by the same dimensionless Mason number that has been demonstrated for rotating magnetic fields. The potential for enhancement of mixing in a bioassay was assessed using a fast chemical reaction that was diffusion-limited. Reducing the Mason number below the critical value, so that chains were formed in the fluid, gave rise to a modest improvement in the time to completion of the reaction.     

The thermal stability of AlN

The thermal stability of AlN powders and thin films has been investigated using reflection high-energy electron diffraction (RHEED) and X-ray diffraction. AlN powder was treated thermally and chemically to assess the oxidation resistance of this compound and to identify the phases formed. The results show that AlN is stable up to 1000° C in air and remains stable up to 1400° Cin vacuo. -AIOOH is formed when AlN is treated with water at 100° C but AlN does not react readily with atmospheric moisture at room temperature. The thermal stability of thin films of AlN on GaAs has been evaluated at temperatures between 900 and 1100° C in a nitrogen atomosphere. It was found that AlN did not oxidize under these conditions. Pure AlN is a suitable encapsulant for GaAs at high annealing temperatures in an inert atmosphere.     

Comportement chaotique des filtres récursifs adaptatifs: application à la compression des signaux téléphoniques

Adaptive filtering gives simple iterative methods for extracting a useful signal by linearly filtering an observation correlated with this useful signal. When the observation contains past values of the filter output—as is the case for a recursive structure— the adaptive filter is a non linear operator which can generate complex behaviours even though adaptation is a standard derivative of the gradient algorithm. Such behaviours are observed in a particular case : theArma adaptive prediction with a sinusoidal input. A slow adaptation speed involves a quasi-periodic behaviour due to the locally unstable character of the predictor. This phenomenon called selfstabilization persists as the adaptation speed increases. Its study is more complicated : the behaviour becomes chaotic. As an illustration, the digitization of telephone signals throughArma adaptive prediction shows the necessity of controlling the qualitative behaviour of the adaptive filtering solutions.     

Adaptive type-2 fuzzy sliding mode controller for SISO nonlinear systems subject to actuator faults

In this paper, an adaptive type-2 fuzzy sliding mode control to tolerate actuator faults of unknown nonlinear systems with external disturbances is presented. Based on a redundant actuation structure, a novel type-2 adaptive fuzzy fault tolerant control scheme is proposed using sliding mode control. Two adaptive type-2 fuzzy logic systems are used to approximate the unknown functions, whose adaptation laws are deduced from the stability analysis. The proposed approach allows to ensure good tracking performance despite the presence of actuator failures and external disturbances, as illustrated through a simulation example.     

Effects of combined wrist deviation and forearm rotation on discomfort score

The aim of the study was to examine the pattern of the change in discomfort for combined wrist deviation and forearm rotation as joint angles increased away from neutral in a repetitive task. There were five levels of wrist deviation (neutral, 35% and 55% of the range of motion (ROM) in radial and ulnar deviation) and five levels of forearm rotation (neutral, 30% and 60% of the ROM in pronation and supination). Twenty-five participants performed a repetitive flexion task with a force of 10 N +/- 1 N at a frequency of 15 exertions per min, with replication after 1 week for six of the participants. A visual analogue scale was used for recording the discomfort scores. Repeated measures analysis of covariance with the Greenhouse-Geisser correction, where necessary, was used on transformed values of the discomfort scores. Grip test endurance time at 50% of maximum voluntary contraction was included as a covariate. Wrist deviation (p = 0.007) and forearm rotation (p = 0.001) were found to have significant effects. Interactions of the main factors were not significant and nor was the covariate. Quadratic regression equations were derived and were used to generate iso-discomfort contours, which show a useful area of low discomfort around the central neutral zone of wrist postures, but with steep increases in discomfort at the extreme combinations of wrist ulnar/radial deviation with forearm pronation/supination. Discomfort equations and contours, showing wrist and forearm postures, which are either acceptable or potentially injurious, are useful for the design of industrial tools, machine controls and workspaces. Reference to these can help to reduce the risk of musculoskeletal injury associated with the tasks or tools by avoiding poor postures with unacceptable deviations from neutral posture.     

Applying Dynamic Training‐Subset Selection Methods Using Genetic Programming for Forecasting Implied Volatility

Volatility is a key variable in option pricing, trading, and hedging strategies. The purpose of this article is to improve the accuracy of forecasting implied volatility using an extension of genetic programming (GP) by means of dynamic training‐subset selection methods. These methods manipulate the training data in order to improve the out‐of‐sample patterns fitting. When applied with the static subset selection method using a single training data sample, GP could generate forecasting models, which are not adapted to some out‐of‐sample fitness cases. In order to improve the predictive accuracy of generated GP patterns, dynamic subset selection methods are introduced to the GP algorithm allowing a regular change of the training sample during evolution. Four dynamic training‐subset selection methods are proposed based on random, sequential, or adaptive subset selection. The latest approach uses an adaptive subset weight measuring the sample difficulty according to the fitness cases' errors. Using real data from S&P500 index options, these techniques are compared with the static subset selection method. Based on mean squared error total and percentage of non‐fitted observations, results show that the dynamic approach improves the forecasting performance of the generated GP models, especially those obtained from the adaptive‐random training‐subset selection method applied to the whole set of training samples.     

A survey on search results diversification techniques

The quantity of information placed on the web has been greater than before and is increasing rapidly day by day. Searching through the huge amount of data and finding the most relevant and useful result set involves searching, ranking, and presenting the results. Most of the users probe into the top few results and neglect the rest. In order to increase user’s satisfaction, the presented result set should not only be relevant to the search topic, but should also present a variety of perspectives, that is, the results should be different from one another. The effectiveness of web search and the satisfaction of users can be enhanced through providing various results of a search query in a certain order of relevance and concern. The technique used to avoid presenting similar, though relevant, results to the user is known as a diversification of search results. This article presents a survey of the approaches used for search result diversification. To this end, this article not only provides a technical survey of existing diversification techniques, but also presents a taxonomy of diversification algorithms with respect to the types of search queries.     

Polyamides incorporating furan moieties. 5. Synthesis and characterisation of furan-aromatic homologues

2,2′-Bis (5-chloroformyl 2-furyl) propane and various aromatic diamines were used as monomers in the study of their interfacial polycondensation and the properties of the ensuing furanic-aromatic polyamides. The effects of such variables as the nature of the organic phase, the temperature, the reaction time, and the type and concentration of the catalyst were investigated as well as the properties of the polyamides in terms of structure, average chain length, T_g, T_m and thermal stability.