Validation of analytical capillary electrophoresis methods for use in a regulated environment

Since its introduction into the analytical laboratory, CE has had to prove that it was capable of generating results comparable to HPLC or GC techniques in the six areas (specificity, precision, accuracy, linearity, ruggedness, and range) typically required of validated methods intended for submission to governmental agencies. This paper will showcase the development and validation of two analytical methods: one for specific identification of HEPES (N-[2-hydroxyethyl]piperazine-N'-[2-ethane sulfonic acid]) and the other to quantitate millimolar concentrations of tris (tris[hydroxymethyl]aminomethane) in high electrolyte solutions. Utilizing neutral markers and internal standards, results for HEPES demonstrate that migration time reproducibility, expressed as %RSD of 2% or less on a variety of capillaries, is obtainable. Additionally, for quantitation of tris, the values obtained for accuracy (%relative mean bias), precision (%RSD), and linearity (r2) over multiple days and capillaries meet the rigorous standards we require of HPLC or GC methods.     

Failure probability and optimum microstructure of pressure vessel steels

This paper presents a method for assessing the probability of brittle fracture in steels used for nuclear power generating equipment. The method is based on a statistical analysis of microstructural parameters and on physical models of the initiation and propagation of cleavage microcracks. The least probability of brittle failure ascertained by this method has been utilized for determining the optimum ferrite grain size. This method represents a foundation for systematic control of the brittle fracture characteristics of engineering steels employed for the components of nuclear power stations.     

The Multifunctional Sactipeptide Ruminococcin C1 Displays Potent Antibacterial Activity In Vivo as Well as Other Beneficial Properties for Human Health

The world is on the verge of a major antibiotic crisis as the emergence of resistant bacteria is increasing, and very few novel molecules have been discovered since the 1960s. In this context, scientists have been exploring alternatives to conventional antibiotics, such as ribosomally synthesized and post-translationally modified peptides (RiPPs). Interestingly, the highly potent in vitro antibacterial activity and safety of ruminococcin C1, a recently discovered RiPP belonging to the sactipeptide subclass, has been demonstrated. The present results show that ruminococcin C1 is efficient at curing infection and at protecting challenged mice from Clostridium perfringens with a lower dose than the conventional antibiotic vancomycin. Moreover, antimicrobial peptide (AMP) is also effective against this pathogen in the complex microbial community of the gut environment, with a selective impact on a few bacterial genera, while maintaining a global homeostasis of the microbiome. In addition, ruminococcin C1 exhibits other biological activities that could be beneficial for human health, as well as other fields of applications. Overall, this study, by using an in vivo infection approach, confirms the antimicrobial clinical potential and highlights the multiple functional properties of ruminococcin C1, thus extending its therapeutic interest.     

Halogenated Ti3C2 MXenes Prepared by Microwave Molten Salt for Hg0 Photo-Oxidation

Ti₃C₂ MXenes with different halogen modifications are prepared rapidly and efficiently by microwave molten salt method, and the MXene surface functional group modification is successfully achieved to address the problems of low purity, complex functional groups, and uncontrollable energy band structure of MXenes obtained by traditional liquid phase etching. Among them, the modification of the iodine (I) functional group onto the surface of Ti₃C₂ changes the energy band structure and band gap, resulting in easier photoexcitation and more photogenerated carriers. The increased Fermi energy is closer to the conduction band, the decreased surface work function weakens the electron confinement ability. The photogenerated carriers can migrate to the surface of the material more easily with extended lifetime, so the activity of the catalyst is improved. Further, for gaseous monomeric mercury (Hg⁰) photo-oxidative removal, Ti₃C₂-I₂ exhibits 85.5% efficiency of Hg⁰ photo-oxidative removal under visible light. Based on the experimental characterization and density functional theory calculations, a mechanism for the photo-oxidative removal of Hg° from Ti₃C₂-I₂ MXene is proposed, which provides a valuable strategy for studying Ti₃C₂ MXenes in the field of photocatalysis.     

Hybrid film of chemically modified graphene and vapor-phase-polymerized PEDOT for electronic nose applications

A hybrid of graphene and conducting polymer holds great potential as the active materials for high performance chemical sensor application. In this work, a thin hybrid film of reduced graphene oxide (RG-O) and poly(3,4-ethylenedioxythiophene) (PEDOT) was fabricated by means of vapor phase polymerization and explored as active material for chemical sensors. The chemical sensors based on hybrid film of RG-O and PEDOT are capable of detecting electrical signals caused by the absorption of trace levels of different analyte vapors with high sensitivity, selectivity and fast response.     

Germanium-antimony-selenium-tellurium thin films: Clusters formation by laser ablation and comparison with clusters from mixtures of elements

Quaternary germanium-antimony-selenium-tellurium (Ge-Sb-Se-Te) thin films deposited from Ge_19.4Sb_16.7Se_63.9−xTe_x (x = 5, 10, 15, and 20) glass-ceramics targets by radio frequency magnetron sputtering were studied using laser ablation quadrupole ion trap time of flight mass spectrometry. Binary, ternary, and quaternary Ge_aSb_bSe_cTe_d clusters were formed and their stoichiometry was determined. By comparison of the clusters obtained from quaternary Ge-Sb-Se-Te thin films and those from ternary Ge-Sb-Te materials, we found that Ge-Te species are not detected from the quaternary system. Furthermore, Ge-Se and Se-Te species are missing in mass spectra generated from Ge-Sb-Se-Te thin films. From the Ge-Sb-Se-Te thin films, 16 clusters were detected while ternary Ge-Sb-Se glasses yielded 26 species. This might be considered as a signal of higher stability of Ge-Sb-Se-Te thin films which is increasing with a higher content of Te. The missing (Se₂⁺, Ge_aSb⁺ (a = 1–4), and GeSe_c⁺ (c = 1, 2)) and new (Ge⁺ and Sb_bTe⁺ (b = 1–3)) clusters may indicate that some of the structural features of the films (Ge₂Se_6/2 and Se₂Sb-SbSe₂) were replaced by (GeSe_4−xTe_x and SbSe_3−xTe_x) ones. In addition, when comparing the stoichiometry of clusters formed from Ge-Sb-Se-Te thin films with those from the mixtures of the elements, only Sb₃⁺ and SbSe⁺ were observed in both cases. The knowledge gained concerning clusters stoichiometry contributes to the elucidation of the processes proceeding during plasma formation used for the chalcogenide thin films deposition.     

Vertically aligned carbon nanotube‐based composite: Elaboration and monitoring of the nanotubes alignment

We present the different elaboration steps of a composite formed of carbon nanotubes (CNT) carpet embedded in an epoxy polymer. Detailed characterization at each step of the elaboration process is performed. The good alignment of CNT in as‐grown carpets is kept all along the elaboration process of the composite, as it is measured at both macro and microscopic scales by X‐ray scattering. We also ensured by X‐ray fluorescence measurements that the iron‐based catalyst particles used for the synthesis were removed from the carpet after a high temperature post‐annealing treatment. These measurements give valuable information for further applications involving unidirectional nanotube composites and membranes, where CNT alignment is a key parameter. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39730.     

A Comparison of the Rough Sets and Recursive Partitioning Induction Approaches: An Application to Commercial Loans

Credit scoring is the term used to describe methods utilized for classifying applicants for credit into classes of risk. This paper evaluates two induction approaches, rough sets and decision trees, as techniques for classifying credit (business) applicants. Inductive learning methods, like rough sets and decision trees, have a better knowledge representational structure than neural networks or statistical procedures because they can be used to derive production rules. If decision trees have already been used for credit granting, the rough sets approach is rarely utilized in this domain. In this paper, we use production rules obtained on a sample of 1102 business loans in order to compare the classification abilities of the two techniques. We show that decision trees obtain better results with 87.5% of good classifications with a pruned tree, against 76.7% for rough sets. However, decision trees make more type–II errors than rough sets, but fewer type–I errors.     

Endovascular stent graft repair for aneurysms on the descending thoracic aorta

BACKGROUND: The traditional treatment of aneurysms of the descending thoracic aorta includes posterolateral thoracotomy and aortic replacement with a prosthetic graft. In this study, we report our experiences and results in endovascular stent graft placement as an alternative to surgical repair. METHODS: Between January 1989 and July 1997, a total of 68 patients (24 women) underwent replacement of the thoracic aorta. Mean age at operation was 51 years. Fifty-eight patients underwent conventional surgical treatment. All of these patients were suitable candidates for endovascular stenting; however, no stent graft material was available at the time of operation. Ten patients (1 chronic dissection, 9 atherosclerotic aneurysm) received in the past 8 months the first commercially manufactured endovascular stent graft. The mean diameter of the aneurysms in this group was 7 cm (range, 6 to 8 cm). Two stent patients were operated on using only spinal cord analgesia. All stent grafts were custom designed for each of the 10 patients. RESULTS: The 30-day mortality in the conventional group was 31% versus 10% in the stent group. Mean length of intervention was 320 minutes in the conventional group versus 150 minutes in the endovascular group. Spinal cord injury occurred in 5 patients (12%) in the surgical group, whereas none of the stented patients developed any neurologic sequelae. Mean intensive care unit stay was 13 days, followed by a mean of 10 days on a ward in the first group compared to 4 days in the intensive care unit and 6 days on the ward in the stent group. One stent was required in 2 patients, two stents were required in 3 patients, and four stents were deployed in 5 patients of our series. Five patients required transposition of the left subclavian artery to achieve a sufficient neck for the proximal placement of the stent. There was complete thrombosis of the thoracic aortic aneurysm surrounding the stent graft in 8 patients (80%). Two patients required restenting as a result of leakage (20%). Stent graft placing was performed through the femoral artery in 8 patients, whereas access was only achieved through the abdominal aorta in 2 patients. CONCLUSIONS: These preliminary results demonstrate that endovascular stent graft replacement might be a promising, cheaper, and safe alternative method in selected patients with descending thoracic aneurysms.     

Fracture toughness and other mechanical metallurgy characteristics of pressure vessel steels

The objective of this work is to investigate the effect of specimen size and evaluation method on estimates of fracture toughness for three commercial pressure vessel steels in different heat treatment conditions. It is found that the fracture toughness values K_C recorded on large, 150 mm thick, specimens were consistently close to the lower bound envelope of the K_δC, K_JC and K_E values established on 20 mm thick specimens. Comparison of the various elasto-plastic fracture criteria ascertained on a single specimen shows that the variations in these values are relatively slight which implies that the evaluation techniques used in this study can be considered as giving results that are, for practical purposes, the same.