Experimental investigation of Co and Fe-Doped CuO nanostructured electrode material for remarkable electrochemical performance

The current research work presents a facile and cost–effective co-precipitation method to prepare doped (Co & Fe) CuO and undoped CuO nanostructures without usage of any type of surfactant or capping agents. The structural analysis reveals monoclinic crystal structure of synthesized pure CuO and doped-CuO nanostructures. The effect of different morphologies on the performance of supercapacitors has been found in CV (cyclic voltammetry) and GCD (galvanic charge discharge) investigations. The specific capacitances have been obtained 156 (±5) Fg^?1, 168(±5) Fg^?1 and 186 (±5) Fg^?1 for CuO, Co-doped CuO and Fe-doped CuO electrodes, respectively at scan rate of 5 mVs^?1, while it is found to be 114 (±5) Fg^?1, 136 (±5) Fg^?1 and 170 (±5) Fg^?1 for CuO, Co–CuO and Fe–CuO, respectively at 0.5 Ag^-1 as calculated from the GCD. The super capacitive performance of the Fe–CuO nanorods is mainly attributed to the synergism that evolves between CuO and Fe metal ion. The Fe-doped CuO with its nanorods like morphology provides superior specific capacitance value and excellent cyclic stability among all studied nanostructured electrodes. Consequently, it motivates to the use of Fe-doped CuO nanostructures as electrode material in the next generation energy storage devices.     

The effect of copper on the crystallization of hexagonal boron nitride

The crystallization process of hexagonal boron nitride in the presence of copper has been investigated. The positive effect of copper on the crystallinity of boron nitride was observed in the three studied systems of: nitrided boron, nitrided boron–carbon, and previously prepared turbostratic boron nitride. However, the presence of copper hindered the formation of boron carbonitride and produced graphite and boron nitride phases separately. Poor crystallinity was found as a conditio sine qua non for the existence of such a compound. Well-crystallized boron nitride had a very low spacing parameter 0.3328 nm and a regular hexagonal shape.     

NUCLEAR MAGNETIC RESONANCE STUDIES OF ASPHALTENES AND COALS. A NEW APPROACH TO OBTAINING ASPHALTENE STRUCTURAL PARAMETERS WITH DIPOLAR DEPHASING

Apparent carbon aromaticities, fa, of some asphaltenes have been measured by n.m.r. in solution and compared with those obtained by the CP/MAS technique on solid samples. The aromaticities were also measured for several Alberta plains coals. From the 1H solution spectra and 13C solid nmr spectra of asphaltenes, some of their skeletal features, not obtainable from solution spectra only, have been suggested.     

Estimation of wood char size at the end of devolatilization in a bubbling fluidized bed combustor

Two processes, namely shrinkage and primary fragmentation are known to be the major causes of size reduction of wood during its devolatilization in a fluidized bed combustor. A simple phenomenological model incorporating these effects to compute the average char size at the end of devolatilization is proposed. Experiments are conducted in a bubbling fluidized bed combustor using wood having three different shapes namely, cylinder, cuboid and sphere, to measure the average char size at the end of devolatilization. The model prediction of average char size agrees with the measured values within a deviation of 15%. An experimental correlation is derived to determine the number of fragments and is used to estimate the mean char size.     

Modelling and experimental investigation of devolatilizing wood in a fluidized bed combustor

A two-dimensional model is developed for the determination of devolatilization time and char yield of cylindrical wood particles in a bubbling fluidized bed combustor. By using the concept of shape factor, the model is extended to particles of cuboid shape. The model prediction of the devolatilization time agrees with the measured data (present and those reported in the literature) for cylindrical and cuboidal shaped particles within ±20% while the char yield is predicted within ±17%. Influence of some important parameters namely, thermal diffusivity, external heat transfer coefficient and shrinkage, on the devolatilization time and char yield are studied. Thermal diffusivity shows noticeable influence on devolatilization time. The external heat transfer coefficient shows little influence beyond a value of 300 W/(m² K). However particle shrinkage shows negligible effect on the devolatilization time but has a significant influence on the char yield.     

Comprehensive Design of a Three-Phase Three-Switch Buck-Type PWM Rectifier

A three-phase three-switch buck-type pulsewidth modulation rectifier is designed for telecom applications in this paper. The rectifier features a constant 400-V output voltage and 5-kW output power at the three-phase 400-V mains. The principle of operation and the calculation of the relative on-times of the power transistors are described. Based on analytical relationships the stresses of the active and passive components are determined and the accuracy of the given calculations is verified by digital simulations. Exemplarily, a 5-kW power converter is then designed based on the analytical expressions and on switching loss measurements from a hardware prototype constructed with insulated gate bipolar transistor/diode power modules. The loss distribution of the components, the total efficiency, and the junction temperatures of the semiconductors are then evaluated in dependency on the operating point. Finally, the trade-off between the selected switching frequency and the admissible power range for the realized design is shown and a total efficiency of 95.0% is measured on the hardware prototype, where an excellent agreement with the theoretically evaluated efficiency is shown     

A study of Nd2Fe14B and a neodymium-rich phase in sintered NdFeB magnets

The microstructure and properties of NdFeB sintered permanent magnets were analysed by different methods. Samples analysed were sintered and thermally treated. The hard magnetic Nd₂Fe₁₄B phase and amorphous neodymium-rich phase were observed by TEM. The neodymium-rich phase contained iron and boron, in elemental and in B₂O₃ form, which is known as a glass former. At the sintering temperature, Nd₂Fe₁₄B and the neodymium-rich phase are supersaturated with iron, which should be dissolved at the annealing temperature to react with neodymium and boron and form additional Nd₂Fe₁₄B phase. Iron precipitates of size up to 2 nm were detected in the Nd₂Fe₁₄B phase. These superparamagnetic precipitates of -Fe could affect the hard magnetic properties of NdFeB magnets.     

Correction to: “SPOCU”: scaled polynomial constant unit activation function

Neural Computing and Applications - Addendum on SPOCU fitting and Erratum.