The effect of segment length on some properties of thermoplastic poly(ester–siloxane)s

A series of novel thermoplastic elastomers, based on poly(dimethylsiloxane) (PDMS) as the soft segment and poly(butylene terephthalate) (PBT) as the hard segment, were synthesized by catalyzed two‐step, melt transesterification reactions of dimethyl terephthalate and methyl esters of carboxypropyl‐terminated poly(dimethylsiloxane)s (M?_n = 550–2170 g mol^?1) with 1,4‐butanediol. The lengths of both the hard and soft segments were varied while the weight ratio of the hard to soft segments in the reaction mixture was maintained constant (57/43). The molecular structure, composition and molecular weights of the poly(ester–siloxane)s were examined by ¹H NMR spectroscopy. The effectiveness of the incorporation of the methyl‐ester‐terminated poly(dimethylsiloxane)s into the copolymer chains was verified by chloroform extraction. The effect of the segment length on the transition temperatures (T_m and T_g) and the thermal and thermo‐oxidative degradation stability, as well as the degree of crystallinity and hardness properties of the synthesized TPESs, were studied. Copyright © 2003 Society of Chemical Industry     

Functionalized oligopolysiloxanes by heterogeneously catalyzed equilibration polymerization reactions

Summary A new general procedure for preparation of functionalized oligopolysiloxanes of predetermined molecular weight is described. It utilizes heterogeneously catalyzed siloxane equilibration polymerization reactions which do not require troublesome and sometimes difficult post-preparative work-up procedures usually encountered with the well known homogeneously catalyzed corresponding reactions. The method is described using as example the preparation of , -telechelic vinyldimethylsiloxy-oligopolydimethylsiloxanes from octamethylcyclotetrasiloxane and 1,3-divinyltetramethyldisiloxane, but reference to the preparations of trimethylsiloxy-, dimethylsiloxy-and carboxypropyldimethylsiloxyoligopolydimethylsiloxanes, oligopolymethylhydridosiloxanes or their copolymers is also made.     

On the critical molecular chain length of polydimethylsiloxane

Because a study of the results reported for the chain dimensions of polydimethylsiloxane (PDMS), critical for the onset of this polymer's non-Newtonian flow behavior, obtained from the viscosity-molecular weight relationships available from the literature, clearly revealed that considerable differences exist between the reported data, a detailed analysis of these data was performed together with an additional examination of 10 new PDMS samples that were selected so as to have molecular weights that would fill the gaps observed in the polymer viscosity–chain length relationship constructed from the accepted literature data. The results obtained were analyzed by using several different procedures integrated into a recently described comparative method that could allow for determination of what is called the most realistic critical value, Z_wc. The latter was determined as 930 PDMS main-chain atoms, which corresponds to this polymer's degree of polymerization of 464.5 and the weight-average molecular weight of 34,500. It is not only shown that after elimination of some clearly erroneous data points from the previously reported relationships the obtained critical chain-length values could very well fit the earlier relationships, but also that appropriate “master” relationships were constructed including 48 pairs of the old and 10 pairs of the new data points. It is suggested that this relationship be accepted as the best-fit viscosity–polymer chain-length dependence for PDMS, and it is pointed out that the obtained PDMS critical chain-length value ranks this polymer's macromolecules as the most flexible of the corresponding long-chain molecules presently known. © 1993 John Wiley & Sons, Inc.     

The effect of the mass ratio of hard and soft segments on some properties of thermoplastic poly(ester‐siloxane)s

A series of thermoplastic elastomers based on soft polydimethylsiloxane (PDMS) and hard poly(butylene terephthalate) (PBT) segments was synthesized using a two‐step transesterification reaction in the melt. The molar mass of the soft PDMS component was constant (M?_nPDMS = 1056 g mol^?1) while the starting reaction mixture compositions were varied to obtained copolymers with a mass ratio of hard to soft segments in the range from 70/30 to 40/60. The structure and composition of the copolymers was verified by ¹H NMR spectroscopy. It appeared that there was a pronounced molar mass maximum when the PBT content of the copolymers was approximately 60 mass%, whereas all samples were considerably inhomogeneous with respect to the distribution of the lengths of the hard segments. Differential scanning calorimetry (DSC) thermograms showed that the melting and crystallization temperature increased with increasing PBT content, as did the total degree of crystallinity, which was confirmed by wide‐angle X‐ray scattering (WAXS) analysis. Thermogravimetric analysis (TGA) performed in nitrogen gave subtle differences for samples of different composition, including that of the PBT homopolymer, whereas in oxygen these differences were more pronounced in the way the thermo‐oxidative stability of the obtained copolymers decreased with decreasing PBT content. Finally, it was shown that the hardness depended directly on the PBT content, ie the higher the PBT content, the greater the hardness of the corresponding copolymer. Copyright © 2004 Society of Chemical Industry     

High-surface-area organic matrix tris(aza)pentacene supported platinum nanostructures as selective electrocatalyst for hydrogen oxidation/evolution reaction and suppressive for oxygen reduction reaction

Developing a Pt-based electrocatalytic material able to selectively catalyze hydrogen oxidation (HOR) while supressing oxygen reduction (ORR) is beneficial for durability of the fuel cells. Namely, degradation of carbon supported Pt particles is dramatically influenced by the unwanted ORR enrolling at the anode due to the air penetration during start-up/shut-down events. We present an organic matrix tris(aza)pentacene (TAP), which belongs to π-functional materials with ladder-like conjugated nitrogen-containing units, as the support for Pt to form a “smart” fuel cell anode able to selectively catalyze HOR and to suppress ORR. “Switching-on/off” of the composite material activity is provided by reversible reduction/oxidation of the TAP in the low potential region which provokes TAP - H_xTAP transition. Conductivity of the reduced H_xTAP enables supported Pt particles to effectively run HOR. In contrast, restricted conductivity of oxidized TAP analogue leads to the substantial drop in the ORR activity with respect to benchmark Pt/C catalyst.     

Relevance of BRAF Subcellular Localization and Its Interaction with KRAS and KIT Mutations in Skin Melanoma

Although skin melanoma (SKM) represents only one-quarter of newly diagnosed skin malignant tumors, it presents a high mortality rate. Hence, new prognostic and therapeutic tools need to be developed. This study focused on investigating the prognostic value of the subcellular expression of BRAF, KRAS, and KIT in SKM in correlation with their gene-encoding interactions. In silico analysis of the abovementioned gene interactions, along with their mRNA expression, was conducted, and the results were validated at the protein level using immunohistochemical (IHC) stains. For IHC expression, the encoded protein expressions were checked on 96 consecutive SKMs and 30 nevi. The UALCAN database showed no prognostic value for the mRNA expression level of KRAS and BRAF and demonstrated a longer survival for patients with low mRNA expression of KIT in SKMs. IHC examinations of SKMs confirmed the UALCAN data and showed that KIT expression was inversely correlated with ulceration, Breslow index, mitotic rate, and pT stage. KRAS expression was also found to be inversely correlated with ulceration and perineural invasion. When the subcellular expression of BRAF protein was recorded (nuclear vs. cytoplasmatic vs. mixed nucleus + cytoplasm), a direct correlation was emphasized between nuclear positivity and lymphovascular or perineural invasion. The independent prognostic value was demonstrated for mixed expression of the BRAF protein in SKM. BRAF cytoplasmic predominance, in association with KIT’s IHC positivity, was more frequently observed in early-stage nonulcerated SKMs, which displayed a low mitotic rate and a late death event. The present study firstly verified the possible prognostic value of BRAF subcellular localization in SKMs. A low mRNA expression or IHC cytoplasmic positivity for KIT and BRAF might be used as a positive prognostic parameter of SKM. SKM’s BRAF nuclear positivity needs to be evaluated in further studies as a possible indicator of perineural and lymphovascular invasion.     

Synthesis and characterization of novel urethane‐siloxane copolymers with a high content of PCL‐PDMS‐PCL segments

Novel polyurethane copolymers derived from 4,4′‐methylenediphenyl diisocyanate (MDI), 1,4‐butanediol (BD) and α,ω‐dihydroxy‐[poly(caprolactone)‐poly (dimethylsiloxane)‐poly(caprolactone)] (α,ω‐dihydroxy‐(PCL‐PDMS‐PCL); = 6100 g mol^?1) were synthesized by a two‐step polyaddition reaction in solution. In the synthesis of the polyurethanes, the PCL blocks served as a compatibilizer between the nonpolar PDMS blocks and the polar comonomers, MDI and BD. The synthesis of thermoplastic polyurethanes (TPU) with high soft segment contents was optimized in terms of the concentrations of the reactants, the molar ratio of the NCO/OH groups, and the time and temperature of the polyaddition reaction. The structure, composition, and hard MDI/BD segment length of the synthesized polyurethane copolymers were determined by ¹H, ¹³C‐NMR, and two‐dimensional correlation (COSY, HSQC, and HMBC) spectroscopy, while the hydrogen bonding interactions in the copolymers were analyzed by FT‐IR spectroscopy. The influence of the reaction conditions on the structure, molecular weight, thermal, and some physical properties was studied at constant composition of the reaction mixture. A change in the molar ratio of the NCO/OH groups and the reaction conditions modified not only the molecular weight of the synthesized polyurethanes, but also the microstructure and therefore the thermal and physical properties of the copolymers. It was demonstrated that only PCL segments with high soft segment contents crystallize, thereby showing spherulitic morphology. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Compatibilized iPP/aPS blends: The effect of the viscosity ratio of the components on the blends morphology

More than 25 PP/PS/SEP blends, where PP is isotactic polypropylene, PS is atactic polystyrene, and SEP is poly(styrene‐block‐ethylene‐co‐propylene), were prepared. The main objective of this study was to investigate the influence of PP/PS viscosity ratio, λ_TM, on the blends' morphology. It was shown that λ_TM strongly influenced not only the overall morphology of the blends, but also the morphology of SEP, which exhibited as many as five different types of structure when blended with PP and/or PS. SEP was found an efficient compatibilizer of PP/PS blends as it decreased the average particle size in all studied systems. An interesting “by‐product” of this work was the discovery of a brand‐new type of polymer morphology, which was called morel structure. The characteristic feature of the morel structure was PS matrix compartmentalized by SEP. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2236–2249, 2006     

Fracture and fatigue of natural fiber-reinforced cementitious composites

This paper presents the results of an experimental study of resistance-curve behavior and fatigue crack growth in cementitious matrices reinforced with eco-friendly natural fibers obtained from agricultural by-products. The composites include: blast furnace slag cement reinforced with pulped fibers of sisal, banana and bleached eucalyptus pulp, and ordinary Portland cement composites reinforced with bleached eucalyptus pulp. Fracture resistance (R-curve) and fatigue crack growth behavior were studied using single-edge notched bend specimens. The observed stable crack growth behavior was then related to crack/microstructure interactions that were elucidated via scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Fracture mechanics models were used to quantify the observed crack-tip shielding due to crack-bridging. The implications of the results are also discussed for the design of natural fiber-reinforced composite materials for affordable housing.     

Application of a Genetic Algorithm for the Optimization of a Complex Reservoir System in Tunisia

A genetic algorithm (GA) model is developed and used for optimizing the allocation of water resources within a complex multiple reservoir system located in Tunisia. The GA model considers two objectives: the water allocation to demand centers and the salinity level of the water supply to end users. These two objectives are combined into a single objective function using a weighting factor approach. Five different cases (representing five different weighting factor combinations) were analyzed by the GA model to produce the “optimum” allocation of water resources for each case. The generated solutions exhibited low variability. The results are then compared using a range of system performance indicators to measure reliability, resilience, and vulnerability. The evaluation of the system performance is an essential step to help system managers identify the preferred allocation strategy and it provides a comprehensive insight into system behavior.