Top-Seeded Melt-Growth of YBa2Cus3Ox Crystals for Neutron Diffraction Studies

We have grown cubic centimeter-size crystals of YBa₂Cu₃O _x suitable for neutron studies, by a top-seeded melt-growth technique. Growth conditions were optimized with an eye toward maximizing phase purity. It was found that the addition of 2% Y₂BaCuO₅ and 0.5% Pt (by mass) were required to prevent melt loss and to obtain the highest crystallinity. A neutron diffraction study on a mosaic of six such crystals found that the final Y₂BaCuO₅ concentration was 5%, while other impurity phases comprised less than 1% by volume. The oxygen content was set to x = 6.5, the crystals were detwinned, and then carefully annealed to give the well-ordered ortho-II phase. The neutron study determined that 70% of the mosaic's volume was in the majority orthorhomic domain. The neutron (006) and (110) rocking curve widths were ～1° per crystal and ～2.2° for the mosaic, and the oxygen chain correlation lengths were >100 Å in the a- and b-directions and ～50 Å in the c-direction.     

Poly(Styrene‐Divinylbenzene) Based Media for Liquid Chromatography

The latest developments and in particular important synthetic aspects for the preparation of modern poly(styrene‐divinylbenzene) (PS‐DVB) based liquid chromatography (LC) supports are reviewed. In this context, the chemistry of particular porous and nonporous, functionalized, monolithic, coated silica and more specialized mixed organic PS‐DVB media is covered. Special consideration is given to modern approaches such as micro‐(μ)‐HPLC and coating techniques and their most important applications. Synthetic particularities relevant to the corresponding applications are outlined.     

Catkin liked nano-Co3O4 catalyst built-in organic microreactor by PEMOCVD method for trace CO oxidation at room temperature

In this paper, tricobalt tetraoxide (Co₃O₄) catalyst was coated on the polydimethylsiloxane microchannel by the plasma-enhanced metal-organic chemical vapor deposition technology. The obtained Co₃O₄ film was characterized by SEM, XRD, XPS, and TEM, and the results show that the as-deposited Co₃O₄ film was initially composed of many cauliflowers-shaped microclusters. Also, the microcauliflower was transformed from an amorphous phase to a crystal phase when the Co₃O₄ film was treated by Ar and O₂ plasma for more than 20 min, and the crystal lattice line occurred on the surface of nano-sized-Co₃O₄ particles. Meanwhile, the interface of Co₃O₄ particles with diameter between 3 and 12 nm became obvious and some nano-catkin structures were also formed on the Co₃O₄ film. The ratio of Co³⁺/Co²⁺ in the spinel-type Co₃O₄ was nearly 2, and the nano-particles predominantly expose their {311}, {111}, and {220} planes. These morphologies and structure characteristics were found to be ideal for increasing the catalytic activity efficiency of Co₃O₄ for CO oxidation, and the catalytic stability of Co₃O₄ coated on the organic microreactor lasted nearly 85 h for trace CO oxidation at room temperature.     

Experiences with large-scale operational trials of ALTO-enhanced P2P filesharing in an intra-ISP scenario

Application Layer Traffic Optimization (ALTO) has recently gained attention in the research and standardisation community as a way for a network operator to guide the peer selection process of distributed applications by providing network layer topology information. In particular P2P applications are expected to gain from ALTO, due to the many connections peers form among each other, often without taking network layer topology information into account. In this paper, we present results of an extensive intra-ISP trial with an ALTO-enhanced P2P filesharing software. In summary, our results show that—depending on the concrete setting and on the distribution of upload capacity in the network—ALTO enables an ISP to save operational costs significantly while not degrading application layer performance noticeably. In addition, based on our experience we are able to give advice to operators on how to save costs with ALTO while not sacrificing application layer performance at all.     

Energy Scales in the High-T c Superconductor YBa2Cu3O6+x

The optical conductivity sum rule is used to examine the evolution of the spectral weight N(ω) in both the normal and superconducting states of optimally and underdoped YBa₂Cu₃O_6+x along the a axis. Differences in N(ω) above and below T _c allow the strength of the superconducting condensate ρ_s to be determined. In the optimally-doped material, ρ_s is fully formed at energies comparable to the full superconducting gap maximum (?0.1 eV), while in the underdoped material the energy scale for convergence is considerably higher (?0.6 eV). This difference is discussed in terms of normal-state properties.     

Energy dissipation in laser-based free form heading: a numerical approach

Cold forming generally allows the fast generation of parts with very low tolerances. In addition, mechanical properties are improved, if work hardening materials are used. Transferring the cold forming process to micro range leads to a decrease in the maximum achievable upset ratio so that the forming process becomes inefficient. Therefore, a laser-based free form heading process has been developed to generate preforms which can be calibrated in a secondary cold forming step. The achievable upset ratios reach values of several hundreds instead of 2.1 which is common for single step mechanical upsetting. In this article, heat losses arising in the material accumulation process using laser-based free form heading are analyzed and discussed. For this purpose, the process is modeled within the framework of continuum mechanics and simulated by a finite element method. By using a numerical approach, a systematic study on heat losses is performed in order to identify the influence of radiation, heat transfer due to convection and thermal conduction during laser irradiation time. The simulation results, which are validated with experimental data, show that the radiation is the most important mechanism reducing the efficiency of the accumulation process.     

Hyperthermostabilization of Bacillus licheniformis{alpha}-amylase and modulation of its stability over a 50{degrees}C temperature range

Bacillus licheniformis     

A simple method to account for topography in the radiometric correction of radar imagery

This article presents a method to study and correct radiometric distortions caused by topography in SAR images. The method is easy to implement and requires neither sophisticated software nor code-level programming. It also considers the case of a flat surface having an elevation different from the one for which calibration parameters were derived. An ortho-image of the slant range distance is used with a Digital Elevation Model to generate images of the local incident angle along the range and azimuth directions. The method compensates for variations in the terrain area of each pixel and for the angular dependence of backscatter, allowing the choice of either an empirical or semi-empirical scattering model. The method is applied to high-resolution C-SAR subsets of an agricultural area in the Central Cordillera of Costa Rica. The removal of topographic features appears excellent for local incident angles up to 80°, but small-scale structures have pronounced effects on the radar return for higher local incident angles and are not adequately corrected.     

Short time creep behaviour of Invar steel

During processing of so‐called true flat shadow/masks made of Invar steel for large size TV screens the mask is stretched onto a solid frame. Mask and frame are submitted to a final heat treatment (blackening treatment) in order to enhance the emissivity of the material. Elevated temperatures and pretension makes the mask material prone to plastic straining, resulting in disutility of the unit for the application. From a technological point of view, the material behaviour under these conditions has been defined as short time creep behaviour. The mechanisms causing creep in this special case are not fully understood. Focus of the present work was the examination of the effect of cube twins on the short time creep behaviour of the investigated Invar steel by texture analysis using EBSD technology. This investigation was conducted under four different material conditions covering a whole set of production steps during shadowmask processing. Detailed information about the change of the volume fractions and the orientation of characteristic texture components, most of all the cube twins, could be gained. The observations revealed that during the creep test two types of cube twins make an orientation change, thus plastic deformation takes place, causing relaxation of the material. The observation of cube twin rotation during the creep test is partly confirmed by the simulation of the respective Taylor factors.