Evaporation and Evolution of Suspended Solution Droplets at Atmospheric and Reduced Pressures

Thermal history and solute precipitation behavior of suspended solution droplets of sodium chloride (NaCl), magnesium sulphate (MgSO₄), and zirconium hydroxychloride (ZrO(OH)Cl) evaporating at atmospheric and reduced pressures are studied. Experimental measurements on the variation of droplet diameter, solution concentration, and temperature during the evaporation period are presented and discussed. The results of solute precipitation behavior in solution droplets observed under an optical microscope are displayed and discussed. Results indicate that reducing the pressure (∼ 33 kPa) results in a change in the solution droplet evaporation rate, but the thermal histories of a particular solution droplet are similar at the atmospheric and reduced pressures. At atmospheric and reduced pressures used in this study, the d² law for solution droplets is valid at early stages of the evaporation and before the solute precipitation initiates. Drying of MgSO₄ and ZrO(OH)Cl solution droplets results in the formation of spherical particles, whereas drying of spherical NaCl solution droplets results in the formation of cubic particles.     

A novel open-loop high-speed CMOS sample-and-hold

A new open-loop high-speed CMOS sample-and-hold is presented. Based on new method for further reduction of voltage-dependent charge injection, a new CMOS sample-and-hold was designed. Simulation results confirm the effectiveness of this method. Over 10 dB improvement in signal-to-noise ratio, compared to the signal-to-noise ratio of conventional bottom plate sampling S/Hs was achieved with this method. A comparison between newly designed S/H and the bottom-plate sampling S/H is presented.     

Reserve estimation of an open pit mine under price uncertainty by real option approach

Reserve estimation is a key to find the correct NPV in a mining project. The most important factor in reserve estimation is the metal price. Metal price fluctuations in recent years were exaggerated, and imposed a high degree of uncertainty to the re-serve estimation, and in consequence to the whole mine planning procedure. Real option approach is an efficient method of deci-sion making in the uncertain conditions. This approach has been used for evaluation of defined natural resources projects until now. This study considering the metal price uncertainty used real option approach to prepare a methodology for reserve estimation in open pit mines. This study was done on a copper cylindrical deposit, but the achieved methodology can be adjusted for all kinds of deposits. This methodology was comprehensively described through the examples in such a manner that can be used by the mine planners.     

A hybrid multi-criteria decision-making model for firms competence evaluation

In this paper, we present a hybrid multi-criteria decision-making (MCDM) model to evaluate the competence of the firms. According to the competence-based theory reveals that firm competencies are recognized from exclusive and unique capabilities that each firm enjoy in marketplace and are tightly intertwined within different business functions throughout the company. Therefore, competence in the firm is a composite of various attributes. Among them many intangible and tangible attributes are difficult to measure. In order to overcome the issue, we invite fuzzy set theory into the measurement of performance. In this paper first we calculate the weight of each criterion through adaptive analytic hierarchy process (AHP) approach (A³) method, and then we appraise the performance of firms via linguistic variables which are expressed as trapezoidal fuzzy numbers. In the next step we transform these fuzzy numbers into interval data by means of α-cut. Then considering different values for α we rank the firms through TOPSIS method with interval data. Since there are different ranks for different α values, we apply linear assignment method to obtain final rank for alternatives.     

Training based, moving digital filter method for real time heat flux function estimation

In this paper the neural networks is utilized to estimate the “filter coefficients” needed to estimate heat flux in a particular system. In developing the training phase of the network inspiration is drawn from the Burgraff's exact solution of the IHCP as well as the filter method. Thus, the estimation phase neither requires any temperature field nor the sensitivity coefficients calculations. The neural network used in this work is a 2-layer perceptron. It is shown via classical triangular heat flux test cases that the method can yield very accurate, very efficient as well as stable estimations.     

CEDAR: Modeling impact of component error derating and read frequency on system-level vulnerability in high-performance processors

Reliability of the current microprocessor technology is seriously challenged by radiation-induced soft errors. Accurate Vulnerability Factor (VF) modeling of system components is crucial in designing cost-effective protection schemes in high-performance processors. Although Statistical Fault Injection (SFI) techniques can be used to provide relatively accurate VF estimations, they are often very time-consuming. Unlike SFI techniques, recently proposed analytical models can be used to compute VF in a timely fashion. However, VFs computed by such models are inaccurate as the system-level impact of soft errors is overlooked.     

A High Throughput Configurable SDR Detector for Multi-user MIMO Wireless Systems

Spatial division multiplexing (SDM) in MIMO technology significantly increases the spectral efficiency, and hence capacity, of a wireless communication system: it is a core component of the next generation wireless systems, e.g. WiMAX, 3GPP LTE and other OFDM-based communication schemes. Moreover, spatial division multiple access (SDMA) is one of the widely used techniques for sharing the wireless medium between different mobile devices. Sphere detection is a prominent method of simplifying the detection complexity in both SDM and SDMA systems while maintaining BER performance comparable with the optimum maximum-likelihood (ML) detection. On the other hand, with different standards supporting different system parameters, it is crucial for both base station and handset devices to be configurable and seamlessly switch between different modes without the need for separate dedicated hardware units. This challenge emphasizes the need for SDR designs that target the handset devices. In this paper, we propose the architecture and FPGA realization of a configurable sort-free sphere detector, Flex-Sphere, that supports 4, 16, 64-QAM modulations as well as a combination of 2, 3 and 4 antenna/user configuration for handsets. The detector provides a data rate of up to 857.1 Mbps that fits well within the requirements of any of the next generation wireless standards. The algorithmic optimizations employed to produce an FPGA friendly realization are discussed.     

A novel free space communication system using nonlinear InGaAsP microsystem resonators for enabling power-control toward smart cities

Wireless Networks - Nowadays, the smart grid has demonstrated a great ability to make life easier and more comfortable given recent advances. This paper studies the above issue from the perspective...