Properties of nanoporous organosilicate hybrid thin films with a bimodal pore size distribution

Low dielectric poly[methylsilsesquioxane‐ran‐trifluoropropylsilsesquioxane‐ran‐(2,4,6,8‐tetramethyl‐2,4,6,8‐tetraethylenecyclotetrasiloxane)silsesquioxane]s {P[M‐ran‐TFP‐ran‐(TCS)]SSQs} having various compositions were synthesized using trifluoropropyl trimethoxysilane, methyl trimethoxysilane and 2,4,6,8‐tetramethyl‐2,4,6,8‐tetra(trimethoxysilylethyl)cyclotetrasiloxane. The chemical composition of the polymers and the content of SiOH end‐groups were controlled by adjusting the reaction conditions, and they were characterized by ¹H‐NMR. The thermally decomposable trifluoropropyl groups on the P[M‐ran‐TFP‐ran‐(TCS)]SSQ backbone and heptakis(2,3,6‐tri‐O‐methyl)‐β‐cyclodextrin (CD) were employed as pore generators. The dielectric constants of the porous CD/P[M‐ran‐TFP‐ran‐(TCS)]SSQ films were in the range 2.0–2.7 (at 100 kHz) depending on the concentration of the porogens, and showed no change over 4 days under aqueous conditions. The pore size of the films showed a bimodal distribution, with diameters of ca 0.5–1.0 nm for those originating from the trifluoropropyl groups and 1.7 nm from the CD. The elastic modulus and hardness of the 30 vol% CD‐blended film with a dielectric constant of 2.26 were 2.40 and 0.38 GPa, respectively, as determined by a nanoindenter. Copyright © 2005 Society of Chemical Industry     

Training sequence design and channel estimation of OFDM-CDMA broadband wireless access networks with diversity techniques

In this paper, an OFDM-CDMA system employing various diversity schemes is considered for a possible candidate of broadband wireless access networks and broadcasting applications. With an emphasis on a preamble design for multi-channel separation, we address a channel estimation based on the time-domain windowing and its imperfectness in OFDM-based multiple-antenna transmission systems. By properly designing each preamble for multiple antennas to be orthogonal in the time domain, the channel estimation can be applied to the HIPERLAN/2 and IEEE 802.11a standards in the case of more than two transmit antennas. Also, the effect of diversity techniques on the performance of OFDM-CDMA based broadband wireless access networks is investigated and the maximum achievable diversity gain for a two-path Rayleigh fading environment is evaluated. Simulation results show that the OFDM-CDMA system applying a space-time-frequency diversity with a full-rate full diversity code can give the diversity of D=4 and D=8 for both multi-user cases of maximum user and half user capacities, respectively.     

Fiberoptic intrinsic fluorescence for in-situ cure monitoring of amine cured epoxy and composites

The cure reactions of epoxy-diamine and its composites are monitored in-situ using the intrinsic fluorescence of the aromatic diamine, diaminodiphenyl sulfone (DDS). With a fiberoptic fluorimeter, in-situ cure monitoring was performed via a single fiber, distal-end probe, in neat epoxy as well as in commercial grade prepregs containing graphite fibers and DDS curing agent. The prepregs were investigated during multiply lamination in an oven. The fluorescence excitation spectra were obtained by emitting at 420 nm with a scan range of 320 to 400 nm, and the DDS peak position was determined as a function of cure time and temperature. The DDS spectra show a progressive red shift up to 24 nm when the primary amine is reacted with epoxide to become the secondary and the tertiary amines. The spectral shift of the DDS is also correlated with the extent of epoxide reaction determined by the Fourier transform infrared (FTIR) spectroscopy. Both data exhibit a linear relation, consistent with the behavior of the DDS peak shift, which increases linearly with the amine reaction. The excitation spectra also show a temperature dependency such that the amount of red shift increases with the measurement temperature in a manner that can be described by an exponential function. The temperature effects also depend on the state of cure in the sample. The temperature correction can be made by the application of an empirically developed equation. Thus, a direct comparison can be made among the on-line data obtained under varying conditions of cure, by reducing the spectral data to any reference temperature. This intrinsic fluorescence technique is much simpler than the previously reported extrinsic fluorophore technique, which requires the addition of an extrinsic fluorophore and an internal dye, and can be applied to any commercial prepregs containing DDS, thus making it a very powerful and widely applicable monitoring tool for composite processing.     

Application of artificial neural networks to the analysis of two‐dimensional fluorescence spectra in recombinant E coli fermentation processes

A two‐dimensional (2D) spectrofluorometer was used to monitor various fermentation processes with recombinant E coli for the production of 5‐aminolevulinic acid (ALA). The whole fluorescence spectral data obtained during a process were analyzed using artificial neural networks, ie self‐organizing map (SOM) and feedforward backpropagation neural network (BPNN). The SOM‐based classification of the whole spectral data has made it possible to qualitatively associate some process parameters with the normalized weights and variances, and to select some useful combinations of excitation and emission wavelengths. Based on the classified fluorescence spectra a supervised BPNN algorithm was used to predict some of the process parameters. It was also shown that the BPNN models could elucidate some sections of the process's performance, eg forecasting the process's performance. Copyright © 2005 Society of Chemical Industry     

Porosity distribution in highly compressible cake: Experimental and theoretical verification of the dense skin

The rate of filtration and the water content of cake are influenced by the existence of a dense skin in a highly compressible cake. The phenomenon of the dense skin has been rarely studied, and its existence has not been verified experimentally. In this study, the porosity variation in a very compressible cake is measured by using a new experimental apparatus, and with this the existence of dense skin has been established experimentally. ‘Unified theory on solid-liquid separation’, a recently developed theory, is utilized for calculating the porosity variation in a very compressible cake.     

Pharmacologic profile of survivors of acute myocardial infarction at United States academic hospitals

Optimal drug therapy for patients with acute myocardial infarction (AMI) is well described in the medical literature. However, data on the actual pharmacologic management of patients surviving AMI at academic hospitals is unavailable. The purpose of this study was to document treatment profiles in 500 patients surviving AMI at 12 academic hospitals in the United States. These profiles were compared with established guidelines and were evaluated for trends. Overall, thrombolytics (streptokinase > or = tissue-type plasminogen activator) were administered in 29% of the patients, with a greater proportion of patients receiving beta-blockers than calcium channel antagonists in the initial 72 hours (61% vs 40%; p < 0.005) and at discharge (51% vs 35%; p < 0.005). Further, women were less likely than men to receive thrombolytic therapy (odds ratio [OR] = 0.61; confidence interval [CI], 0.54 to 0.69) or beta-blocker therapy within the first 72 hours (OR = 0.61; CI, 0.55 to 0.67) or at hospital discharge (OR = 0.53; CI, 0.48 to 0.58). Overall, improvements could still be made in the number of patients who receive thrombolytic and acute and chronic beta-blocker therapies after AMI, particularly in women. Changes in treatment profiles may be a reflection of the publication of large clinical trials.     

An investigation into vehicle rollover prevention by coordinated control of active anti-roll bar and electronic stability program

This paper presents a method for designing a controller that uses an active anti-roll bar (AARB) and an electronic stability program (ESP) for rollover prevention. ESP with longitudinal speed control (LSC) can carry out active braking to reduce vehicle speed and lateral acceleration to prevent a rollover. To enhance the rollover prevention capability of the ESP, an AARB is adopted. The controller for the AARB was designed based on linear quadratic (LQ) static output feedback (SOF) control methodology, which attenuates the effect of lateral acceleration on the roll angle and roll rate by control of the suspension stroke and the tire deflection of the vehicle. Although this AARB significantly increases ride comfort and rollover prevention, it has a drawback — the vehicle loses its maneuverability. Therefore, the ESP with LSC is used to overcome this drawback. Simulations showed that the proposed method was effective in preventing a rollover.     

A unified theory on solid-liquid separation: Filtration, expression, sedimentation, filtration by centrifugal force, and cross flow filtration

Based upon a new conception that the solid compressive pressure on a cake surface is not null, almost of all solid-liquid separation operations have been re-examined. For cake filtration, the phenomenon caused by the solid compressive pressure on a cake surface is discussed for thin cake. New expression and hindered sed-imentation theories are developed by above new conception using Darcy’s equation. Application of the new conception to centrifugal filtration and tangential filtration is also discussed. Above results lead to the conclusion that cake filtration, expression, hindered sedimentation, centrifugal filtration and tangential filtration can be described with a unified theory, and the main difference between the operations is only the boundary condition of cake.     

Contraction stress build‐up of anisotropic conductive films (ACFs) for flip‐chip interconnection: Effect of thermal and mechanical properties of ACFs

The important mechanical mechanism for the electrical conduction of anisotropic conductive films (ACFs) is the joint clamping force after the curing and cooling processes of ACFs. In this study, the mechanism of shrinkage and contraction stress and the relationship between these mechanisms and the thermomechanical properties of ACFs were investigated in detail. Both thickness shrinkages and modulus changes of four kinds of ACFs with different thermomechanical properties were experimentally investigated with thermomechanical and dynamic mechanical analysis. Based on the incremental approach to linear elasticity, contraction stresses of ACFs developed along the thickness direction were estimated. Contraction stresses in ACFs were found to be significantly developed by the cooling process from the glass‐transition temperature to room temperature. Moreover, electrical characteristics of ACF contact during the cooling process indicate that the electrical conduction of ACF joint is robustly maintained by substantial contraction stress below T_g. The increasing rate of contraction stresses below T_g was strongly dependent on both thermal expansion coefficient (CTE) and elastic modulus (E) of ACFs. A linear relationship between the experimental increasing rate and E × CTE reveals that the build‐up behavior of contraction stress is closely correlated with the ACF material properties: thermal expansion coefficient, glassy modulus, and T_g. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2634–2641, 2004