Experimental Comparison of the Effects of Nanometric and Micrometric Particulates on the Tensile Properties and Fracture Behavior of Al Composites at Room and Elevated Temperatures

This article studies the influence of nanometric (n-SiC_p) and micrometric-scale SiC particulates (μ-SiC_p) on the tensile properties of the Al 7075 alloy. The unreinforced Al and its composites were synthesized using the powder metallurgy (P/M) route and were tested uniaxially in tension at both room and elevated temperatures. Aging behavior was studied to observe any effect of the reinforcement on the aging kinetics and hardness of the composites. X-ray diffraction was performed to determine the crystal structures of the raw materials and any reaction phase formed in the composites. The n-SiC_p were not dispersed uniformly in the Al matrix and clustered mainly at the grain boundaries. The stiffness of the composites increased and the ductility decreased with an increase in the volume fraction of the n-SiC_p. The n-SiC_p proved to be a better reinforcement than the traditional μ-SiC_p in terms of imparting higher ductility to the composite. Fractography and microscopy using optical, scanning electron, and transmission electron microscopes were performed for failure and microstructural analysis of all the materials. At room temperature, the fracture altered from ductile in the unreinforced Al to brittle in the composites. At an elevated temperature, the fracture mechanism transformed from brittle to ductile rupture in the composites.     

Generation of terawatt pulses by use of optical parametric chirped pulse amplification

Optical parametric chirped pulse amplifiers offer exciting prospects for generating new extremes in power, intensity, and pulse duration. An experiment is described that was used to investigate the operation of this scheme up to energies approaching a joule, as a step toward its implementation at the petawatt level. The results demonstrate an energy gain of 10(10) with an energy extraction efficiency of 20% and close to diffraction-limited performance. Some spectral narrowing during amplification was shown to be compatible with the time-varying profile of the pump beam and consistent with the measured recompressed pulse durations of 260 and 300 fs before and after amplification, respectively.     

Network utility maximization over partially observable Markovian channels

We study throughput utility maximization in a multi-user network with partially observable Markovian channels. Here, instantaneous channel states are unavailable and all controls are based on partial channel information provided by ACK/NACK feedback from past transmissions. Equivalently, we formulate a restless multi-armed bandit problem in which we seek to maximize concave functions of the time average reward vector. Such problems are generally intractable and in our problem the set of all achievable throughput vectors is unknown. We use an achievable region approach by optimizing the utility functions over a non-trivial reduced throughput region, constructed by randomizing well-designed round robin policies. Using a new ratio MaxWeight rule, we design admission control and channel scheduling policies that stabilize the network with throughput utility that is near-optimal within the reduced throughput region. The ratio MaxWeight rule generalizes existing MaxWeight-type policies for the optimization of frame-based control systems with policy-dependent frame sizes. Our results are applicable to limited channel probing in wireless networks, dynamic spectrum access in cognitive radio networks, and target tracking of unmanned aerial vehicles.     

Repetition blindness, forward and backward.

In these experiments, 2 letters were presented sequentially to the left and right of fixation, followed by pattern masks. Report was cued by spatial location (Experiments 1a, 1b, 2, 4, and 5) or temporal position (Experiments 3, 4, and 5). In all experiments, 2 identical letters on a trial resulted in reduced accuracy of report (repetition blindness; RB) for both the 1st and 2nd presented letters. This decrement was greater for the 2nd letter if subjects expected temporal cues, but tended to be greater for the Ist letter if they expected spatial cues. Analyses of errors and responses on catch trials indicated no bias against report of repetitions, and the repetition decrement did not interact with output order. The data are inconsistent with both type-refractoriness and memory-retrieval accounts of RB. A modified version of N. G. Kanwisher's (1987) token-individuation theory is proposed to account for the results. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Capacity and delay tradeoffs for ad hoc mobile networks

We consider the throughput/delay tradeoffs for scheduling data transmissions in a mobile ad hoc network. To reduce delays in the network, each user sends redundant packets along multiple paths to the destination. Assuming the network has a cell partitioned structure and users move according to a simplified independent and identically distributed (i.i.d.) mobility model, we compute the exact network capacity and the exact end-to-end queueing delay when no redundancy is used. The capacity-achieving algorithm is a modified version of the Grossglauser-Tse two-hop relay algorithm and provides O(N) delay (where N is the number of users). We then show that redundancy cannot increase capacity, but can significantly improve delay. The following necessary tradeoff is established: delay/rate/spl ges/O(N). Two protocols that use redundancy and operate near the boundary of this curve are developed, with delays of O(/spl radic/N) and O(log(N)), respectively. Networks with non-i.i.d. mobility are also considered and shown through simulation to closely match the performance of i.i.d. systems in the O(/spl radic/N) delay regime.     

Assessment of cooked alpaca and llama meats from the statistical analysis of data collected using an 'electronic nose'

As part of an EU-funded project to assist in developing the production chain of meat from camelids in South America we have investigated the possibility of using an electronic nose to distinguish between the different types of meat of commercial interest. On-site monitoring of freshly cooked camelid meat using a Bloodhound electronic nose has been carried out in Peru and Bolivia. Sampling was carried out using inert, collapsible plastic bags. Linear discriminant analysis of data generated by the electronic nose classified the samples of meat. Some problems experienced in analysing the data relating to sample size are discussed.     

Spatially resolved X-ray spectroscopy using a flat HOPG crystal

A novel design of a 1-D imaging X-ray spectrometer is implemented, using a high efficiency HOPG (highly oriented pyrolitic graphite) Bragg crystal and a double-entrance-slit. The double slit provides self-calibration of the imaging magnification. The spatial and spectral resolutions and dispersion are characterised both analytically and by ray tracing simulations. A key feature of this approach is that it enables the X-ray spectrum to be measured over different regions of the plasma source. The application of this instrument is demonstrated in high intensity laser-foil interaction experiments.