Nanocrystalline TiO2 photosensitized with natural polymers with enhanced efficiency from 400 to 600 nm

TiO₂ sensitization for solar applications requires not only efficient but also stable and inexpensive sensitizers. Different condensed tannins extracted from bark wastes of tropical wood trees were studied as possible sensitizers of TiO₂. These natural polymers adhere strongly to the TiO₂ even from aqueous solutions. Absorption spectra are presented for 1 mM aqueous sensitizing solutions prepared with lyophilized condensed tannins which absorb light in the visible range. Spectral photocurrent measurements and I–V characterization show that no bias is required for electron injection to the TiO₂ from all studied condensed tannins. Incident photon to current efficiency (IPCE) analysis indicates that surface complexation originates absorption bands with different electron injection efficiencies. These play a dominant role in determining IPCE spectral shape. We propose that surface modification by the sensitizer changes the surface trap density, thereby decreasing recombination losses.     

Autoimmune hemolytic anemia and posthepatitis-C liver cirrhosis

Here we are presenting the case of a 70-years-old woman who has hepatic cirrhosis anti-HCV and insulin-dependent diabetes mellitus, without relevant epidemiologic ascendants or previous transfusions and HBV, HIV negatives. On admission to our hospital she showed signs of autoimmune hemolytic anaemia (AHA) which was confirmed by positive direct Coombs test and an improvement in blood test after corticoid treatment. Having discarded other possible causes such as drugs infectious diseases or essential mixed cryoglobulinemia (CME), we put forward the possible association between AHA and infection by HCV, where AHA was an extrahepatic immunological manifestation of HCV. This fact has never been brought to light in previous medical literature.     

Recovering spectral data from natural scenes with an RGB digital camera and colored filters

Many spectral‐recovery methods using RGB digital cameras assume the underlying smoothness of illuminant and reflectance spectra, and apply low‐dimensional linear models. The aim of the present work was to test whether a direct‐mapping method could be used instead of a linear‐models approach to recover spectral radiances and reflectances from natural scenes with an RGB digital camera and colored filters. In computer simulations, a conventional RGB digital camera with up to three colored filters was used to image scenes drawn from a hyperspectral image database. Three measures were used to evaluate recovery with the direct‐mapping method: goodness‐of‐fit, root‐mean‐square error, and a color‐difference metric. It was found that with two and three filters both spectral radiances and reflectances could be recovered sufficiently accurately for many practical applications. With little increase in computational complexity, an RGB camera and a few colored filters can provide significantly better recovery of natural scenes than an RGB camera alone. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 352–360, 2007     

GRAPHICAL PROCEDURE FOR REACTIVE DISTILLATION SYSTEMS

In this paper we analyze a ternary reactive distillation system, where an equilibrium chemical reaction occurs in the liquid phase. By using a set of transformed variables proposed by Barbosa el al. (1988b) and well known graphical procedures for non-reactive systems; the minimum reflux ratio, minimum number of equilibrium stages, mass and energy balances for a reactive column and flash can be easily obtained. The procedures developed in this paper are applied to ISOBUTYLENE-METHANOL-MTBE system.

The main objective in developing this model is to obtain, as much as possible, rigorous information for the analysis of one reactive distillation column in a Process Simulator with capability of handling this type of new operation.     

Isomerization of n-hexane over mono- and bimetallic Pd–Pt catalysts supported on ZrO2–Al2O3–WOx prepared by sol–gel

The catalytic performance of mono- and bimetallic Pd (0.6, 1.0 wt.%)–Pt (0.3 wt.%) catalysts supported on ZrO₂ (70, 85 wt.%)–Al₂O₃ (15, 0 wt.%)–WO_x (15 wt.%) prepared by sol–gel was studied in the hydroisomerization of n-hexane. The catalysts were characterized by N₂ physisorption, XRD, TPR, XPS, Raman, NMR, and FT-IR of adsorbed pyridine. The preparation of ZrW and ZrAlW mixed oxides by sol–gel favored the high dispersion of WO_x and the stabilization of zirconia in the tetragonal phase. The Al incorporation avoided the formation of monoclinic-WO₃ bulk phase. The catalysts increased their S_BET for about 15% promoted by Al₂O₃ addition. Various oxidation states of WO_x species coexist on the surface of the catalysts after calcination. The structure of the highly dispersed surface WO_x species is constituted mainly of isolated monotungstate and two-dimensional mono-oxotungstate species in tetrahedral coordination. The activity of Pd/ZrW catalysts in the hydroisomerization of n-hexane is promoted both with the addition of Al to the ZrW mixed oxide and the addition of Pt to Pd/ZrAlW catalysts. The improvement in the activity of Pd/ZrAlW catalysts is ascribed to a moderated acid strength and acidity, which can be correlated to the coexistence of W⁶⁺ and reduced-state WO_x species (either W⁴⁺ or W⁰). The addition of Pt to the Pd/ZrAlW catalyst does not modify significantly its acidic character. Selectivity results showed that the catalyst produced 2MP, 3MP and the high octane 2,3-dimethylbutane (2,3-DMB) and 2,2-dimethylbutane (2,2-DMB) isomers.     

Ultra-low noise front-end electronics for air-coupled ultrasonic non-destructive evaluation

Air-coupled ultrasonic inspection has been demonstrated to be a non-contact method of great interest in non-destructive evaluation (NDE) applications. The absence of direct contact or a liquid couplant provides this technique very attractive benefits in front of the well-known and well-developed liquid-coupled ultrasonic inspection systems. A wide range of defects can be detected by means of ultrasound coupled to and harvested from the specimen in absence of contact when using appropriate transducers designed for their operation in air.This paper presents an easy way to integrate air-coupled piezoelectric transducers in conventional ultrasonic NDE equipment. The design of a specific front-end electronics by using an ultra-low noise amplifier enables existing inspection systems to be used for the dry-coupled ultrasonic test of materials and structures. The amplifier provides the receiver with a signal-to-noise ratio large enough for good quality signal processing and imaging. System dynamic ranges of more than 100 dB are achieved.     

Advanced and Intelligent Control Techniques Applied to the Drive Control and Path Tracking Systems on a Robotic Wheelchair

This paper presents the theoretical support and experimental results of the application of advanced and intelligent control techniques to the drive control and trajectory tracking systems on a robotic wheelchair. The adaptive optimal control of the differential drive helps to improve the automatic guidance system's safety and comfort taking into consideration operating conditions such as load and distribution changes or motion actuator limitations. Furthermore, the incorporation of an optimal controller to minimize location errors and a fuzzy controller to adapt the linear velocity to the characteristics of the trajectory, provide the vehicle with a high degree of intelligence and autonomy, even when faced with obstacles. The global control solution implemented increases the features of the wheelchair for handicapped people, especially for those with a high degree of disability.     

Antigens and Antibodies of the Antiphospholipid Syndrome as New Allies in the Pathogenesis of COVID-19 Coagulopathy

High prevalence of both criteria and extra-criteria antiphospholipid antibodies (aPL) has been reported in COVID-19 patients. However, the differences in aPL prevalence decreased when an age-matched control group was included. The association of aPL with thrombotic events in COVID-19 is very heterogeneous. This could be influenced by the fact that most of the studies carried out were conducted on small populations enriched with elderly patients in which aPL was measured only at a single point and they were performed with non-standardized assays. The few studies that confirmed aPL in a second measurement showed that aPL levels hardly changed, with the exception of the lupus anticoagulant that commonly reduced. COVID-19 coagulopathy is an aPL-independent phenomenon closely associated with the onset of the disease. Thrombosis occurs later in patients with aPL presence, which is likely an additional prothrombotic factor. B2-glycoprotein deficiency (mainly aPL antigen caused both by low production and consumption) is very common during the SARS-CoV2 infection and has been associated with a greater predisposition to COVID-19 complications. This could be a new prothrombotic mechanism that may be caused by the blockage of its physiological functions, the anticoagulant state being the most important.