The use of natural (Pinus pinaster) resin in the production of printing ink and the printability effect

Alkyd resins are generally used in the production of printing inks. All industries look for alternative raw materials in the production of ink with the growing inclination toward using natural products. Resins forming the vehicle of the ink to be obtained from natural resources will provide benefits for the environment, nature, and living creatures. The aim of the study was to promote the use of natural resin in the ink system. Natural Pinus pinaster resin was added into vegetable and mineral oil-based solvents in pure form with alkyd resin in different amounts and ink varnishes of different combinations were prepared. Then, printing inks were produced from these varnishes in pure and hybrid form. Following the assessment of the rheological properties of the inks prepared, printing tests were conducted to assess the printing quality parameters. Ideal mixing ratios of the natural resins in the ink were determined for printability. The environmental importance and advantages of the use of natural resins were discussed. Recommendations were given in line with the results to encourage widespread use of natural resins in near future.     

Qualitative Differences Between Conscious and Nonconscious Processing? On Inverse Priming Induced by Masked Arrows.

In general, both consciously and unconsciously perceived stimuli facilitate responses to following similar stimuli. However, masked arrows delay responses to following arrows. This inverse priming has been ascribed to inhibition of premature motor activation, more recently even to special processing of nonconsciously perceived material. Here, inverse priming depended on particular masks, was insensitive to contextual requirements for increased inhibition, and was constant across response speeds. Putative signs of motor inhibition in the electroencephalogram may as well reflect activation of the opposite response. Consequently, rather than profiting from inhibition of primed responses, the alternative response is directly primed by perceptual interactions of primes and masks. Thus there is no need to assume separate pathways for nonconscious and conscious processing. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Poly(ε‐caprolactone) composites containing gentamicin‐loaded β‐tricalcium phosphate/gelatin microspheres as bone tissue supports

In this work, novel antibacterial composites were prepared by using poly(ε‐caprolactone) (PCL) as the main matrix material, and gentamicin‐loaded microspheres composed of β‐tricalcium phosphate (β‐TCP) and gelatin. The purpose is to use this biodegradable material as a support for bone tissue. This composite system is expected to enhance bone regeneration by the presence of β‐TCP and prevent a possible infection that might occur around the defected bone region by the release of gentamicin. The effects of the ratio of the β‐TCP/gelatin microspheres on the morphological, mechanical, and degradation properties of composite films as well as in vitro antibiotic release and antibacterial activities against Escherichia coli and Staphylococcus aureus were investigated. The results showed that the composites of PCL and β‐TCP/gelatin microspheres had antibacterial activities for both bacteria. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Utilization of a series resonant DC link for a DC motor drive

A high-frequency series resonant DC link converter is utilized as a DC motor drive. This system generates a resonant current in a series link, and switching is done at zero current instants, reducing switching losses to a minimum value. A pulse density modulation (PDM) strategy, utilizing a current rectangular loop and an external motor speed feedback loop, controls the resonant converter. A sinusoidal input fundamental current and nearly unity input power factor can be observed in different load conditions. The overall characteristics of the system, including such variables as maximum power, input current, start up, and transient responses, are presented by digital simulation and were verified on an actual prototype system     

Thermoelectric Properties of the Clathrate I Ba<Subscript>8</Subscript>Ge<Subscript>43</Subscript>□<Subscript>3</Subscript>

The clathrate I Ba₈Ge₄₃□₃ [space group Ia[`3]d Ia\bar{3}d , no. 230, a = 21.307(1) ?] has been synthesized as a single phase and characterized by x-ray powder diffraction and metallographic analysis. Electrical and thermal transport measurements have been performed in the temperature range of 5 K to 673 K. Ba₈Ge₄₃□₃ displays the electrical resistivity of a poor metal at low temperatures, with semiconducting-like behavior appearing above 300 K.     

A novel nonchemical approach to the expansion of halloysite nanotubes and their uses in chitosan composite hydrogels for broad‐spectrum dye adsorption capacity

A novel method based on cryoscopic expansion of halloysite nanotubes via frozen water molecules entrapped in their lumens and subsequent lyophilization was described. Detailed analyses confirmed that the inner and outer diameters as well as the surface area of the nanotubes could be efficiently increased without disturbing the inherent tubular structure. The benefits of cryo‐expanded nanotubes for the enhancement of chitosan hydrogel performances were discussed. The composite hydrogels, depending on their compositions and morphologies, exhibited significantly enhanced swelling and mechanical properties compared with neat chitosan hydrogel. This effect was even more pronounced in the hydrogels containing cryo‐expanded halloysite nanotubes. Although neat chitosan is a selectively good adsorbent for anionic dyes, in the presence of a small amount of cryo‐expanded halloysite, the resultant composite hydrogel can establish a relatively high adsorption capacity for anionic and cationic dyes as a broad‐spectrum dye adsorbent. POLYM. COMPOS., 37:2770–2781, 2016. © 2015 Society of Plastics Engineers     

The effect of soy protein concentrate addition on the physical, chemical, and sensory properties of strawberry flavored ice cream

The effect of soy protein concentrate (0, 1.5, 3, and 4.5%) on the physical, chemical, and sensory properties of strawberry flavored (0, 0.01 and 0.02%) ice cream samples was examined. All samples were analyzed for pH, titratable acidity, total solids, nitrogen, fat, ash, overrun, viscosity, meltdown, Hunter L-, a-, b- values, flavor, body and texture, and appearance. Substituting soy protein concentrate (SPC) in ice cream formula for non-fat dry milk (NFDM) positively influenced the nitrogen content, viscosity values, and melting and appearance properties of the ice cream samples while overrun values and flavor scores were negatively affected. SPC could be incorporated into the ice cream formula in the range of 1.5–3% devoid of significantly diminishing the physical, chemical, and sensory properties.     

RF-MEMS load sensors with enhanced Q-factor and sensitivity in a suspended architecture

In this paper, we present and demonstrate RF-MEMS load sensors designed and fabricated in a suspended architecture that increases their quality-factor (Q-factor), accompanied with an increased resonance frequency shift under load. The suspended architecture is obtained by removing silicon under the sensor. We compare two sensors that consist of 195 μm × 195 μm resonators, where all of the resonator features are of equal dimensions, but one’s substrate is partially removed (suspended architecture) and the other’s is not (planar architecture). The single suspended device has a resonance of 15.18 GHz with 102.06 Q-factor whereas the single planar device has the resonance at 15.01 GHz and an associated Q-factor of 93.81. For the single planar device, we measured a resonance frequency shift of 430 MHz with 3920 N of applied load, while we achieved a 780 MHz frequency shift in the single suspended device. In the planar triplet configuration (with three devices placed side by side on the same chip, with the two outmost ones serving as the receiver and the transmitter), we observed a 220 MHz frequency shift with 3920 N of applied load while we obtained a 340 MHz frequency shift in the suspended triplet device with 3920 N load applied. Thus, the single planar device exhibited a sensitivity level of 0.1097 MHz/N while the single suspended device led to an improved sensitivity of 0.1990 MHz/N. Similarly, with the planar triplet device having a sensitivity of 0.0561 MHz/N, the suspended triplet device yielded an enhanced sensitivity of 0.0867 MHz/N.     

Characterization and elemental analysis of wood pellets obtained from low-valued types of wood

In this study, we compared the quality of wood pellets obtained from several different raw materials, i.e., Rhododendron ponticum (Type 1), Laurus nobilis (Type 2), and Castanea sativa (Type 3). The quality of the wood pellets was characterized mainly by their bulk density, moisture content, ash content, volatiles, sulfur content in the ash, total sulfur content, heating values, elemental analysis of the ash, and chlorine content. The results showed that bulk density was similar for each type of pellet. In quality values, ash content and the sulfur content in the ash were found to be lower for Type 3 (Chestnut wood pellets) than they were for the other two types. The results also showed that dry samples of Type 1, Type 2, and Type 3 wood pellets had heating values of 5057, 4691, and 4571 kcal/kg, respectively, whereas the original (undried) samples had heating values of 4571, 4409, and 4293 kcal/kg, respectively.