排序方式: 共有21条查询结果,搜索用时 31 毫秒
1.
2.
Keikhosrokiani Pantea Mustaffa Norlia Zakaria Nasriah Abdullah Rosni 《Cognition, Technology & Work》2020,22(2):281-305
Cognition, Technology & Work - iHeart is a mobile healthcare system which monitors and tracks patients with hypertension and arrhythmia. This empirical study aims to assess the interaction... 相似文献
3.
The effect of polypropylene maleic anhydride on polypropylene/(recycled acrylonitrile butadiene rubber)/(sugarcane bagasse) composite 下载免费PDF全文
Santiagoo Ragunathan Zainal Mustaffa Hussin Kamarudin Sung Ting Sam Hanafi Ismail 《乙烯基与添加剂工艺杂志》2017,23(3):228-233
The effect of polypropylene maleic anhydride (PPMAH) on the tensile properties and morphology of polypropylene (PP)/(recycled acrylonitrile butadiene rubber) (NBRr)/(sugarcane bagasse) (SCB) composites has been studied. Six different composites (100/0/10, 80/20/10, 70/30/10, 60/40/10, 50/50/10, and 40/60/10), with fixed 5 wt% of PPMAH compatibilizer and without PPMAH addition, were carried out. The composites were prepared through melt‐mixing technique at 180oC for 9 min using a rotor speed of 15 rpm. The specimens were analyzed for mechanical properties and examined with scanning electron microscopy. The tensile strength was found to decrease with increasing filler content. However, tensile strength and Young's modulus of the PPMAH compatibilized composites were found to increase, while the elongation at break showed the opposite trend as compared with the control composites. The morphology results support the tensile properties and indicated a better interaction between the SCB filler and PP/NBRr matrices with the presence of PPMAH as a compatibilizer. This is due to the esterification bonding between the SCB filler and PP matrix in the presence of PP/NBRr matrices. J. VINYL ADDIT. TECHNOL., 23:228–233, 2017. © 2015 Society of Plastics Engineers 相似文献
4.
Norlia Muhamad ;Siti Aishah Muhmed ;Mashitah M. Yusoff ;Jolius Gimbun 《食品科学与工程:英文版(2...》2014,(5):255-260
This paper presents the influence of solvent polarity and extraction conditions on the extraction of total flavonoid, total phenolic and antioxidants from Averrhoa bilimbi. The experiment was performed using a different solvent at different extraction conditions, including extraction time (15-240 min), temperature (30-70 ℃) and agitation speed (50-300 rpm). Results showed that yields of extraction varies with solvent polarity. Extraction using 50% aqueous methanol gives the highest antioxidant activity and flavonoid content. The highest total flavonoid content (193.3 μg quercetin equivalent/g dry weight), total phenolic content (717.8 μg gallic acid equivalent/g dry weight) and antioxidant activity (77%) was achieved using 50% methanol, at 70 ℃ and agitation speed of 300 rpm. This work may be useful for obtaining higher bioactive compounds during the extraction process of A. bilimbi. 相似文献
5.
6.
7.
Razali Mustaffa Azizah Osman Salmah Yusof Suhaila Mohamed 《Journal of the science of food and agriculture》1998,78(2):201-207
Studies on the physico-chemical changes between different hand positions (top, middle and bottom) within a bunch and different finger positions (upper and lower) within a hand at different maturity stages (between 3 and 15 weeks from the flower emergence) were carried out on ‘Montel’ banana (Musa cavendishii L). The suitable harvesting stage was found to be between 12 and 15 weeks after flower emergence. The size, weight, volume and peel colour of fruits increased significantly (P < 0·01) for fruits from all positions (hands and fingers within a hand) of the bunch until the end of maturity stage. On the other hand, texture values of the fruit decreased significantly (P < 0·01). The total soluble solids (TSS), ascorbic acid (AA) and sugar contents increased slowly during development, but the increase was rapid during ripening. The starch composition accumulated gradually (P < 0·05) at the early stages and decreased thereafter. The pH and titratable acidity (TA) values showed an irregular pattern in all the fruits from all positions during the maturity stage. However, significant differences were also detected in size, weight, volume, peel colour, texture, TSS, AA, pH, TA, starch and sugar contents between different hands and different fingers portions from the same bunch. © 1998 Society of Chemical Industry 相似文献
8.
Thermoplastic natural rubber (TPNR) as polymer matrix was prepared by the melt blending method. Nickel-cobalt-zinc (NiCoZn) ferrite as a filler was prepared by the double-stage sintering method in air. The filler was incorporated in the polymer matrix using a Brabender internal mixer. The filler content was varied from 0 to 30 wt.%. The morphological study of the fractured surface using a scanning electron microscope (SEM) shows the effects of strain. The X-ray diffraction (XRD) indicates the coexistence of both the ferrite and thermoplastic. Electrical properties were studied using a high frequency response analyzer (HFRA) at room temperature (298°K). The results show that resistivity (ρ) decreases, but the dielectric constant increases, with increasing filler content. The resistivity and dielectric constant for all the composites are in the range of 8.9 × 106–9.7 × 105 Ωm and 33–72, respectively. A sharp change in both quantities around 15 wt.% filler content is interpreted as due to the transition from a dispersed system to an attached system. The tensile study shows that the elongation at break point and the tensile strength of the composite at room temperature decrease with increasing filler content. The hardness of the samples decreases with increasing filler content. 相似文献
9.
Eltefat Ahmadi Sheikh Abdul Rezan Norlia Baharun Sivakumar Ramakrishnan Ahmad Fauzi Guangqing Zhang 《Metallurgical and Materials Transactions B》2017,48(5):2354-2366
The kinetics of chlorination of titanium nitride (TiN) was investigated in the temperature range of 523 K to 673 K (250 °C to 400 °C). The results showed that the extent of chlorination slightly increased with increasing temperature and decreasing particle size of titanium nitride at constant flow rate of N2-Cl2 gas mixture. At 523 K (250 °C), the extent of chlorination was 85.6 pct in 60 minutes whereas at 673 K (400 °C), it was 97.7 pct investigated by weight loss measurement and confirmed by ICP analyses. The experimental results indicated that a shrinking unreacted core model with mixed-control mechanism governed the chlorination rate. It was observed that the surface chemical reaction of chlorine gas on the surface of TiN particles was rate controlling in the initial stage and, during later stage, internal (pore) diffusion through the intermediate product layer was rate controlling step. Overall the process follows the mixed-control model incorporating both chemical reaction and internal diffusion control. The activation energy for the chlorination of TiN was found to be about 10.97 kJ mol?1. In processing TiCl4 from TiN and TiO0.02C0.13N0.85, the solids involved in the chlorination process were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM) and Energy-dispersive X-ray spectrometer (EDX). The SEM/EDX results demonstrated the consumption of TiN particles with extent of chlorination that showed shrinking core behavior. 相似文献
10.
WB Mohamad N Mokhtar M Mafauzy BE Mustaffa M Musalmah 《Canadian Metallurgical Quarterly》1996,27(2):339-342
Height and body weight were measured in 2,284 subjects over 20 years old. The subjects were chosen by cluster sampling in 9 districts of Kelantan. Blood was drawn after an overnight fast for measurement of cholesterol (chol), triglyceride (TG), VLDL and HDL-Chol. Oral glucose tolerance test was performed with 75 g glucose. The overall prevalence of overweight [BMI (kg/m2) > or = 25-< or = 30] and obesity (BMI > 30) was 21.3% and 4.5% respectively. The overweight and obese were significantly younger than the lean subjects. The prevalence of hypercholesterolemia (chol > 5.2 mmol/l) in lean, overweight and obese subjects was 65.3%, 70.2% and 74.7%, respectively. Impaired glucose tolerance was found in 16.6% of the lean, 21.6% of the overweight and 32.0% of the obese subjects. Diabetes mellitus was found in 7.9% of the lean, 10.5% of the overweight and 6.7 of the obese subjects. 10.1% of lean, 13.2% of overweight and 23.3% of obese individuals were hypertensive. In conclusion, the high prevalence of overweight and obesity in Malaysia was associated with adverse lipid and glucose metabolism as well as poor blood pressure control. 相似文献