Electrocoagulation technique in enhancing COD and suspended solids removal to improve wastewater quality.

This paper presents a preliminary study for the removal of COD and suspended solids in wastewater treatment by combining magnetic field and electrocoagulation (EC) technology. The experiments were carried out using batch apparatus and setup in the static method. Batch experiments with two monopolar iron (Fe) plate anodes and cathodes were employed as electrodes. Wastewater samples were prepared from milk powder with an initial COD of 1,140 mgL(-1) and suspended solids of 1,400 mgL(-1) and acidic conditions were employed (pH approximately 3). DC current was varied from 0.5-0.8 A and operating times were between 30 and 50 min. The results show that the effluent wastewater was very clear (turbidity approximately 9 NTU) and its quality exceeded the direct discharge standard. The suspended solids and COD removal efficiencies were as high as 30.6 and 75.5%, respectively. In addition, the experimental results also show that the electrocoagulation could neutralise the pH of wastewater.     

Mental imagery classification using one-dimensional convolutional neural network for target selection in single-channel BCI-controlled mobile robot

Neural Computing and Applications - This paper introduces the use of the one-dimensional convolutional neural network (1D-CNN) for end-to-end EEG decoding with application towards a BCI system with...     

Probing the Structural and Antimicrobial Study on a Sol–Gel Derived Velosef-Loaded Bioactive Calcium Magneso-Silicate Xerogel

Silicon - The nature of the opening silicate- based surface affects the chemical interaction, spectroscopic and antimicrobial efficiency. The aim of this approach was to evaluate the spectroscopic...     

Modern Template Design and Biological Evaluation of Cephradine-loaded Magnesium Calcium Silicate Nanocomposites as an Inhibitor for Nosocomial Bacteria in Biomedical Applications

Silicon - Magnesium calcium silicate nanostructures (MCSNS) loaded with (0.0, 0.6, 0.9, and 1.2 wt%) of Cephradine-drug consisting of mesoporous particles were functionally prepared by sol-gel...     

Synthesis and Characterization of Nano-Composite Alumina–Titania Ceramic Membrane for Gas Separation

A ceramic composite membrane was prepared using a commercial titania ceramic membrane coated by alumina oxide via a sol–gel technique where polyvinyl alcohol (PVA) was used as a binder. The characteristic of the membrane was analyzed in terms of the effect of PVA concentration and sintering temperature on viscosity, pore size, density, porosity and surface area of the membrane. Two vol% of PVA solution containing 4 g of PVA in 100 mL of water was adequate to achieve an appropriate porosity level to avoid cracks on the gel layer. Sol viscosity and pore size of the membrane essentially increased when the PVA concentration was increased. The density of the membrane increased as the sintering temperature increased. The porosity level however, decreased when the temperature was increased. The composite membrane was further characterized in terms of permeability of pure gas at low-temperature region (301 K) where an experimental platform has been developed to perform the permeability studies.     

Architectural Design,Improvement, and Challenges of Distributed Software-Defined Wireless Sensor Networks

Wireless Personal Communications - Software-defined networking (SDN) is widely perceived to simplify network management and monitoring. The introduction of the SDN model into wireless sensor...     

A compact hybrid feature vector for an accurate secondary structure prediction

Amino acid propensity score is one of the earliest successful methods used in protein secondary structure prediction. However, the score performs poorly on small-sized datasets and low-identity protein sequences. Based on current in silico method, secondary structure can be predicted from local folds or local protein structure. In biology, the evolution of secondary structure produces local protein structure with different lengths. To precisely predict secondary structures, we propose a derivative feature vector, DPS that utilizes the optimal length of the local protein structure. DPS is the unification of amino acid propensity score and dihedral angle score. This new feature vector is further normalized to level the edges. Prediction is performed by support vector machines (SVM) over the DPS feature vectors with class labels generated by secondary structure assignment method (SSAM) and secondary structure prediction method (SSPM). All experiments are carried out on RS126 sequences. The results from this proposed method also highlight the overall accuracy of our method compared to other state-of-the-art methods. The performance of our method was acceptable specifically in dealing with low number and low identity sequences.     

Oxidation stability and compositional characteristics of oils from microwave roasted pumpkin seeds during thermal oxidation

The oxidative stability and compositional characteristics of the pumpkin seed oil (PSO) exposed to microwaves were studied during heating at 170°C. The oxidative indices such as free fatty acid (FFA), peroxide value (PV), p-anisidine value (p-AV), TOTOX, specific extinctions and thiobarbituric acid (TBA) value of oils were significantly increased, and the increments were found to be significantly higher (P < 0.05) in unroasted seed oil as compared to roasted seed oil. The relative contents of polyunsaturated fatty acids (PUFAs) were decreased to 84.7%, and saturated fatty acids (SFAs) were increased to 119.5% in unroasted sample, after 9 h of heating. On the other hand, in 12 min roasted samples, the relative contents of PUFAs were decreased to 97.0%, and SFAs were increased to 102.6% after 9 h of heating. The triacylglycerol species LLL and OLL levels were decreased as a consequence of increased heating time, and the reduction tended to be significantly higher in unroasted samples as compared to roasted ones. The oxidation products formed were also investigated by FTIR. The present results indicated that microwave roasting of pumpkin seeds markedly enhanced the oxidative stability of the oils during heating.     

Polyphenol-rich seaweed (Eucheuma cottonii) extract suppresses breast tumour via hormone modulation and apoptosis induction

The edible red seaweed Eucheuma cottonii is abundantly cultivated for carrageenan production. This study investigated the effects of dietary E. cottonii polyphenol-rich extract (ECME) on breast cancer. In vitro assays showed that ECME was antiproliferative against oestrogen-dependent MCF-7 and oestrogen-independent MB-MDA-231 human breast-cancer cells (IC₅₀ values of 20 and 42 μg/ml, respectively) but was non-toxic to normal cell lines. The ECME (150 and 300 mg/kg BW) was fed to female rats and, after 4 weeks, rat mammary tumour was induced using LA7 cells (inoculated subcutaneously). The ECME inhibited tumour development and erythrocyte lipid peroxidation in the cancer-induced rats, dose-dependently. It showed anti-oestrogenic effects on the rat estrous cycle and serum hormone levels. Electron microscopy and histopathology observations confirmed apoptosis in the rat mammary tumours. The polyphenol-rich ECME was tumour-suppressive via apoptosis induction, downregulating the endogenous oestrogen biosynthesis, and improving antioxidative status in the rats.     

Effects of peroxide crosslinking on the mechanical and morphological properties of poly(ethylene‐co‐vinyl acetate)/zeolite composites

Uncrosslinked and chemically crosslinked ethylene‐vinyl acetate copolymers (EVAs) with 5–25 volume percentages of zeolite were prepared in a melt‐mixing process and then compression‐molded on a hot‐press machine according to standard test specifications. The mechanical properties measured by tensile test showed a reduction in tensile strength and elongation at break with increasing zeolite content. However, an increasing trend was observed for tensile modulus with addition of zeolite. Experimental results for ultimate stress were compared with those from Pukanszky equation. The experimental data showed a good fit to the Pukanszky model. The improvement in the interfacial interaction for crosslinked composites was also confirmed by this model. Morphological changes of EVA/zeolite composites were analyzed by scanning electron microscopy (SEM). The fractured surface of the composites indicated more complex morphology at higher zeolite loading. The influence of crosslinking induced by 2 wt% of dicumyl peroxide on the properties of EVA/zeolite composites was also investigated. The crosslinked composites showed better tensile properties than the uncrosslinked ones, a result which might be an indication of enhanced interaction between the EVA and zeolite. Density measurements, gel content determinations, and Fourier transform infrared analyses were also performed to evaluate the crosslink content of the composites. The changes in the properties of chemically crosslinked EVA/zeolite composites were observed. Meanwhile, SEM micrographs of the crosslinked EVA/zeolite composites showed better interfacial strength between zeolite and the EVA matrix as compared to that of the uncrosslinked composites. J. VINYL ADDIT. TECHNOL., 2012. © 2012 Society of Plastics Engineers