Processing,rheology, and storage stability of recycled EVA/LDPE modified bitumen

The optimum processing conditions for the manufacture of polymer‐modified bitumens (PMBs), as well as the rheological properties of the final polymer‐bitumen blends, strongly depend on the characteristics of the mixing device used. The present work is focused on the comparison among the kinetics of the mixing process and the rheological properties and microstructural characteristics of PMBs manufactured in two different mixers. Thus, blends of 60/70 penetration grade bitumen and recycled EVA/LDPE were processed in both high and low‐shear devices. Knowledge on the evolution of shear viscosity and microstructure with time, as well as on the mechanical properties of the final polymer‐bitumen blends, was gained from rheological and modulated DSC tests, and optical microscopy. The results obtained demonstrate that processing in the high‐shear device yields a significant decrease in the time needed for the polymer‐bitumen blend to reach the final stage of the manufacturing process, as well as an important reduction in bitumen oxidation and enhanced properties in a wide range of in‐service temperatures. However, polymer‐bitumen blends manufactured in the high‐shear device are not stable during its storage at high temperature. POLYM. ENG. SCI., 47:181–191, 2007. © 2007 Society of Plastics Engineers     

Rheological characterization of egg yolk processed by spray-drying and lipid-cholesterol extraction with carbon dioxide

The present work studies the rheological properties of avian egg yolks processed by spray-drying and by lipid-cholesterol extraction with CO₂ under near-critical conditions. The results have been compared with those obtained from native egg products in order to analyze the effect of processing on the microstructure and rheological properties of egg yolks. The rheological study included linear viscoelasticity measurements by means of dynamic oscillatory shear and creep tests, which provided information about the unperturbed structure of the material, as well as steady-state flow measurements. The thermal denaturation of proteins, which was produced during the spray-drying of egg yolk, was responsible for the dramatic change from fluid to gel-like behavior. The thermal denaturation of proteins promotes the formation of a gel-like network, which may be attributed to exposure of internal hydrophobic groups that favor protein aggregation. Lipid (and cholesterol) extraction from yolk increased the viscoelasticity functions and flow properties due to the increased protein concentration.     

Effect of processing temperature on the bitumen/MDI-PEG reactivity

Reactive polymers are lately gaining acceptance to give added value to a residue of the crude oil refining process such as bitumen. The resulting material should display enhanced mechanical properties to be considered for advanced applications in construction. In the present paper, we report the effect of processing temperature on the reaction between bitumen compounds and an isocyanate-based reactive polymer, synthesized by reaction of polymeric MDI (4,4′-diphenylmethane diisocyanate) with a low molecular weight polyethylene-glycol (PEG). Rheokinetics experiments, viscosity measurements at 60 °C, atomic force microscopy (AFM) characterization, thin layer chromatography (TLC-FID) analysis and thermogravimetric studies (TGA) were performed on the reactive polymer and on samples of MDI-PEG modified bitumen containing 2 wt.% of the polymer. Results showed the existence of an optimum processing temperature arisen as a consequence of opposite effects: microstructural availability for the formation of a polymer–bitumen network, reaction ability and polymer thermal degradation. Consequently, this study aims to serve as a guideline for the refining and asphalt industries facing the stage of selecting the optimum processing parameters.     

Design and realization of an ultra‐low power sensing RF energy harvesting module with its RF and DC sub‐components

Herein, design, development, and analysis of ultra‐low power sensing energy harvesting modules and their subcomponents for ISM band applications have been studied with a holistic approach in an effort to achieve a feasible and high efficient RF energy harvesting performance. The complete harvester system designed and developed here consists of a zero‐bias RF energy rectifying antenna (rectenna), DC boost converters and energy storage super‐capacitors. Compared with the counterpart energy sources, the surrounding or transmitted wireless energy has low intensity which requires designs with high efficiency. To achieve a successful harvester performance, rectifier circuits with high sensitivity Schottky diodes and proper impedance matching circuits are designed. Dedicated RF signals at various levels from nanowatts to miliwatts are applied at the input of the rectenna and the measured input power versus the scavenged DC output voltage are tabulated. Furthermore, by connecting the rectifier to a high gain antenna and using a RF signal transmitter, the wireless RF power harvesting performance at 2.4 GHz was tested up to 5 m. The performance of the rectenna is analyzed for both low‐power detection and efficiencies. Impedance matching network is implemented to reduce the reflected input RF power, DC to DC converters are evaluated for their compatibility to the rectifiers, and super‐capacitor behaviors are investigated for their charging and storage capabilities. The measured results indicate that a wide operating power range with an ultra‐low power sensing and conversion performance have been achieved by optimizing the efficiency of the Schottky rectifier as low as ?50 dBm. The system can be used for battery free applications or expanding battery life for ultra‐low power electronics, such as; RFID, LoRa, Bluetooth, ZigBee, and low power remote sensor systems.     

Wheat gluten-based materials plasticised with glycerol and water by thermoplastic mixing and thermomoulding

BACKGROUND: Gluten has been investigated as a source for biodegradable polymeric materials because it is a renewable, available and low‐cost raw material. The aim of this study was to evaluate the influence of some variables involved in the two stages of protein/plasticiser thermo‐mechanical processing, where a mixture of glycerol and water was used as the plasticiser. RESULTS: Gluten/glycerol/water blends mixed under different thermal conditions (adiabatic starting at 25 °C and isothermal at 60 and 90 °C) exhibited shear thinning capillary flow behaviour, where a marked increase in flow properties was obtained at the highest temperature. Two thermal events, glass transitions related to the plasticiser blend and gluten, were detected by Modulated Differential Scanning Calorimetry (MDSC) and Dynamic Mechanical Analysis (DMA) tests. Moderate moulding temperature led to less resistant materials showing higher ductility, whereas higher mixing and moulding temperatures led to bioplastics with higher mechanical properties. CONCLUSION: A moulding temperature of 130 °C (close to the denaturation temperature) was found to be suitable for the thermomoulding process. In addition, the use of moderate mixing temperature seems to be convenient for those applications that required materials exhibiting high water absorption behaviour and suitable mechanical properties. Protein extractability results reflect the benefits of combining high shear and high temperature during processing to improve cross‐linking reactions. Copyright © 2010 Society of Chemical Industry     

Detection of Brucella with an automatic hemoculture system: Bact/Alert

BACKGROUND: The ability of in vitro and in vivo detection of Brucella spp. with the Bact/Alert system was studied. METHODS: Three strains of Brucella melitensis and two of Brucella abortus were used. Different dilutions of the five strains were performed in trypticase soy broth (TSB), achieving concentrations of 1 cfu/ml, 5 cfu/ml, 10 cfu/ml and 100 cfu/ml. Ten ml of each dilution and strain were inoculated into 5 aerobic bottles Bact/Alert and 5 biphasic Hemóline bottles. Furthermore, over a 9 month period, 8,216 bottles of Bact/Alert bottles from hospitalized patients and from the emergency department were processed in the authors' laboratory. RESULTS: The mean detection time for Brucella growth was from 2 to 3 days with the Bact/Alert system, and 14 days in the biphasic bottles. Former bottles processed in the authors' laboratory, 11 aerobic bottles belonged to 5 patients in whom brucelosis was confirmed by bloodculture. The Bact/Alert system detected Brucella melitensis in only on bottle at 2.9 days of incubation. In 7 bottles Bact/Alert detected B. melitensis by a blind pass of these bottles at 10 to 20 days of incubation. CONCLUSIONS: These results suggest that the Bact/Alert system does not totally solve the diagnosis of brucellosis. Blind passes of the bloodcultures are required.     

Influence of concentration and temperature on the flow behavior of oil-in-water emulsions stabilized by sucrose palmitate

To study the influence that concentration and temperature exert on the viscous behavior of emulsions stabilized by a sucrose ester (SE) of high hydrophilic-lipophilic balance (HLB), flow curves and droplet size distributions were determined. Flow curves of presheared emulsions always exhibited a shear-thinning behavior at intermediate shear rates, a tendency to a limiting viscosity at high shear rates, and a metastable region at low rates. This behavior can be fitted to a Carreau model. Both SE and oil concentrations increase emulsion viscosity as a result of a more structured system with a lower droplet size and polydispersity. An increase in temperature usually leads to a decrease in emulsion viscosity. However, at high oil concentration, coalescence and phase separation take place at low temperature. On the other hand, at high temperature, droplet bursting due to shear forces, leading to an increase in viscosity, may result. Despite the strong structural breakdown caused by steady shear, master flow curves may be obtained by using superposition methods.     

Wavelet transform‐based analysis of periodicities and trends of Sakarya basin (Turkey) streamflow data

In this study, the wavelet transform and the Mann–Kendall test are used to determine possible trends in annual streamflow series. The wavelet analysis provides detailed information about the time‐frequency contents of the data. Using wavelet components of the original data, it was aimed to find which periodicities are mainly responsible for a trend in the original data. Also, the global wavelet spectra and the continuous wavelet transform (CWT) were used for the analysis of the streamflow data, in order to explain its time‐frequency characteristics. Annual streamflow series across Turkey were used for the detection of trends for the original data and the periodic wavelet components (obtained by discrete wavelet transform). It was found that some periodic events clearly affect the trend in the streamflow series. The DW4 component (16‐yearly periodic component) at the stations of the Sakarya basin is the effective periodic component and is responsible for producing a real trend in the data. The effects of regional differences on the wavelet‐trend analysis are studied using records of the stations located in different climate areas. DW2 (4‐yearly component) and DW3 (8‐yearly component) are the dominant periodic components of this data. This study aims to explain the trend structure in the data. Copyright © 2009 John Wiley & Sons, Ltd.     

Radiation from a circular loop in the presence of sphericallysymmetric conducting or dielectric objects

The problem of electromagnetic radiation from a circular loop antenna of radius a, carrying a current I is considered. The loop may be radiating in the presence of one or more of the following objects: a centrally located dielectric or perfectly conducting sphere of radius ba and outer radius d, a perfectly conducting spherically symmetric cap at radius b, and another such cap at radius d. Typically geometric structures considered are shown. It is demonstrated how the presence of the sphere, shell, and caps can change and direct the radiation pattern of the loop