Perspectives on management theory’s application in the internet of things research

Information Systems and e-Business Management - The growing use of the internet of things (IoT) has provided businesses with a new opportunity. This study performed a systematic literature review...     

Structural Aspects of P2-Type Na0.67Mn0.6Ni0.2Li0.2O2 (MNL) Stabilization by Lithium Defects as a Cathode Material for Sodium-Ion Batteries

A known strategy for improving the properties of layered oxide electrodes in sodium-ion batteries is the partial substitution of transition metals by Li. Herein, the role of Li as a defect and its impact on sodium storage in P2-Na_0.67Mn_0.6Ni_0.2Li_0.2O₂ is discussed. In tandem with electrochemical studies, the electronic and atomic structure are studied using solid-state NMR, operando XRD, and density functional theory (DFT). For the as-synthesized material, Li is located in comparable amounts within the sodium and the transition metal oxide (TMO) layers. Desodiation leads to a redistribution of Li ions within the crystal lattice. During charging, Li ions from the Na layer first migrate to the TMO layer before reversing their course at low Na contents. There is little change in the lattice parameters during charging/discharging, indicating stabilization of the P2 structure. This leads to a solid-solution type storage mechanism (sloping voltage profile) and hence excellent cycle life with a capacity of 110 mAh g^-1 after 100 cycles. In contrast, the Li-free compositions Na_0.67Mn_0.6Ni_0.4O₂ and Na_0.67Mn_0.8Ni_0.2O₂ show phase transitions and a stair-case voltage profile. The capacity is found to originate from mainly Ni³⁺/Ni⁴⁺ and O^2-/O^2-δ redox processes by DFT, although a small contribution from Mn⁴⁺/Mn⁵⁺ to the capacity cannot be excluded.     

Access point selection in the network of Internet of things (IoT) considering the strategic behavior of the things and users

The Journal of Supercomputing - With the expansion in the use of IoT, increasing the efficiency of these networks has become even more significant. Objects need reliable communications at suitable...     

Novel electrospun polymer electrolytes incorporated with Keggin‐type hetero polyoxometalate fillers as solvent‐free electrolytes for lithium ion batteries

In this study, solvent‐free nanofibrous electrolytes were fabricated through an electrospinning method. Polyethylene oxide (PEO), lithium perchlorate and ethylene carbonate were used as polymer matrix, salt and plasticizer respectively in the electrolyte structures. Keggin‐type hetero polyoxometalate (Cu‐POM@Ru‐rGO, Ni‐POM@Ru‐rGO and Co‐POM@Ru‐rGO (POM, polyoxometalate; rGO, reduced graphene oxide)) nanoparticles were synthesized and inserted into the PEO‐based nanofibrous electrolytes. TEM and SEM analyses were carried out for further evaluation of the synthesized filler structures and the electrospun nanofibre morphologies. The fractions of free ions and crystalline phases of the as‐spun electrolytes were estimated by obtaining Fourier transform infrared and XRD spectra, respectively. The results showed a significant improvement in the ionic conductivity of the nanofibrous electrolytes by increasing filler concentrations. The highest ionic conductivity of 0.28 mS cm^?1 was obtained by the introduction of 0.49 wt% Co‐POM@Ru‐rGO into the electrospun electrolyte at ambient temperature. Compared with solution‐cast polymeric electrolytes, the electrospun electrolytes present superior ionic conductivity. Moreover, the cycle stability of the as‐spun electrolytes was clearly improved by the addition of fillers. Furthermore, the mechanical strength was enhanced with the insertion of 0.07 wt% fillers to the electrospun electrolytes. The results implied that the prepared nanofibres are good candidates as solvent‐free electrolytes for lithium ion batteries. © 2020 Society of Chemical Industry     

Ground bounce in digital VLSI circuits

This paper is concerned with the analysis and optimization of the ground bounce in digital CMOS circuits. First, an analytical method for calculating the ground bounce is presented. The proposed method relies on accurate models of the short-channel MOS device and the chip-package interface parasitics. Next the effect of ground bounce on the propagation delay and the optimum tapering factor of a multistage buffer is discussed and a mathematical relationship for total propagation delay in the presence of the ground bounce is obtained. Effect of an on-chip decoupling capacitor on the ground bounce waveform and circuit speed is analyzed next and a closed form expression for the peak value of the differential-mode component of the ground bounce in terms of the on-chip decoupling capacitor is provided. Finally, a design methodology for controlling the switching times of the output drivers to minimize the ground bounce is presented.     

Imaging of the optic disc and retinal nerve fiber layer: the effects of age, optic disc area, refractive error, and gender.

We cross-sectionally examined the relationship between age, optic disc area, refraction, and gender and optic disc topography and retinal nerve fiber layer (RNFL) measurements, using optical imaging techniques. One eye from each of 155 Caucasian subjects (age range 23.0-80.8 y) without ocular pathology was included. Measurements were obtained by using the Heidelberg Retina Tomography (HRT), the GDx Nerve Fiber Analyzer, and the Optical Coherence Tomograph (OCT). The effects of age were small (R2 < 17%) and were limited to specific HRT, GDx, and OCT parameters. Disc area was significantly associated with most HRT parameters and isolated GDx and OCT parameters. Refraction and gender were not significantly associated with any optic disc or RNFL parameters. Although effects of age on the optic disc and RNFL are small, they should be considered in monitoring ocular disease. Optic disc area should be considered when cross-sectionally evaluating disc topography and, to a lesser extent, RNFL thickness.     

Analysis of the PLL jitter due to power/ground and substrate noise

Phase-locked loops (PLL) in radio-frequency (RF) and mixed analog-digital integrated circuits (ICs) experience substrate coupling due to the simultaneous circuit switching and power/ground (P/G) noise which translate to a timing jitter. In this paper. an analysis of the PLL timing jitter due to substrate noise resulting from P/G noise and large-signal switching is presented. A general comprehensive stochastic model of the substrate and P/G noise sources in very large-scale integration (VLSI) circuits is proposed. This is followed by calculation of the phase noise of the constituent voltage-controlled oscillator (VCO) in terms of the statistical properties of substrate and P/G noise. The PLL timing jitter is then predicted in response to the VCO phase noise. Our mathematical method is utilized to study the jitter-induced P/G noise in a CMOS PLL, which is designed and simulated in a 0.25-/spl mu/m standard CMOS process. A comparison between the results obtained by our mathematical model and those obtained by HSPICE simulation prove the accuracy of the predicted model.     

Numerical study of the variable-order fractional version of the nonlinear fourth-order 2D diffusion-wave equation via 2D Chebyshev wavelets

Engineering with Computers - In this article, the 2D Chebyshev wavelets (CWs) are used for designing a proper procedure to solve the variable-order (VO) fractional version of the nonlinear...     

Chebyshev polynomials for the numerical solution of fractal–fractional model of nonlinear Ginzburg–Landau equation

Engineering with Computers - This paper introduces a new version for the nonlinear Ginzburg–Landau equation derived from fractal–fractional derivatives and proposes a computational...     

A mashup based framework for multi level healthcare interoperability

Healthcare delivery is evolving from disease-centered to patient-centered care delivery where patients are active participants in their healthcare delivery. This calls for more communication and collaboration among all healthcare actors. There is also an increasing demand for personalized healthcare systems that provide effective information management, facilitate communication and collaboration, and support applications to meet user requirements. To address these challenges, we need to advance the integration and interoperability of healthcare applications in a controlled manner. Drawing upon a conceptual model from a collaborative care case study, we identified a set of interoperability requirements and developed a Mashup based interoperability framework. Our framework allows patients and other healthcare actors to engage in collaborative processes through online applications facilitated by mashups. We then use proof-of-concept implementations to demonstrate how our framework is able to facilitate different types of interoperability. We believe that collaborative technologies such as mashups can implement process interoperability requirements to support collaborative care delivery, particularly for asynchronous care delivery.