Performance evaluation of a water/silicone oil two‐phase partitioning bioreactor using Rhodococcus erythropolis T902.1 to remove volatile organic compounds from gaseous effluents

BACKGROUND: In the framework of biological processes used for waste gas treatment, the impact of the inoculum size on the start‐up performance needs to be better evaluated. Moreover, only a few studies have investigated the behaviour of elimination capacity and biomass viability in a two‐phase partitioning bioreactor (TPPB) used for waste gas treatment. Lastly, the impact of ethanol as a co‐substrate remains misunderstood. RESULTS: Firstly, no benefit of inoculation with a high cellular density (>1.5 g L^?1) was observed in terms of start‐up performance. Secondly, the TPPB was monitored for 38 days to characterise its behaviour under several operational conditions. The removal efficiency remained above 63% for an inlet concentration of 7 g isopropylbenzene (IPB) m^?3 and at some time points reached 92% during an intermittent loading phase (10 h day^?1), corresponding to a mean elimination capacity of 4 × 10^?3 g L^?1 min^?1 (240 g m^?3 h^?1) for a mean IPB inlet load of 6.19 × 10^?3 g L^?1 min^?1 (390 g m^?3 h^?1). Under continuous IPB loading, the performance of the TPPB declined, but the period of biomass acclimatisation to this operational condition was shorter than 5 days. The biomass grew to approximately 10 g L^?1 but the cellular viability changed greatly during the experiment, suggesting an endorespiration phenomenon in the bioreactor. It was also shown that simultaneous degradation of IPB and ethanol occurred, suggesting that ethanol improves the biodegradation process without causing oxygen depletion. CONCLUSION: A water/silicone oil TPPB with ethanol as co‐substrate allowed the removal of a high inlet load of IPB during an experiment lasting 38 days. Copyright © 2008 Society of Chemical Industry     

Prebiotic synthesis of sequential peptides on the Hadean beach by a molecular engine working with nitrogen oxides as energy sources

Addressing the still open question of the prebiotic origin of sequential macromolecules (peptides, nucleic acids) on the primitive Earth, we describe a molecular engine (the primary pump), which works at ambient temperature and continuously generates, elongates and complexifies sequential peptides. This new scenario is based on a cyclic reaction sequence, whose keystep is the activation of amino acids into their N‐carboxyanhydrides (NCA) through nitrosation by NOx. This process could have taken place on tidal beaches; it requires a buffered ocean, emerged land and a nitrosating atmosphere. With the help of geochemical studies and computer simulations of atmosphere photochemistry, we show that the primitive Earth during the Hadean may have satisfied all these requirements. © 2001 Society of Chemical Industry.     

Microwave heating of poly(ethylene terephthalate) bottle preforms used in the thermoforming process

Thermoforming (free blowing) of poly(ethylene terephthalate) preforms was successfully and quickly performed in a rotating system designed for dielectric hysteresis heating. Temperature profile modeling was carried out with the amorphous poly(ethylene terephthalate) permittivity at different temperatures. The Maxwell and heat equations were used to determine the best profile and power tuning. The determination of the theoretical boundary conditions was accomplished by the adjustment of the numerical transient external surface wall temperature with experimental infrared pyrometry results. In comparison with infrared, microwaves allowed high power density absorption inside the perform wall without a dramatic temperature gradient. Consequently, the heat blowing stage could be accelerated, and the process took at least 5 times less energy than infrared heating. Industrial applications involve the integration of the molding step and the design of the overall process. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Ring-opening polymerization of decamethylcyclopentasiloxane initiated by a superbase: Kinetics and rheology

The use of phosphazene bases in combination with water was proved to be efficient in order to obtain polysiloxane polymers from cyclic monomers. Only a few minutes are necessary to obtain polymer chains with a monomer concentration of 5% at the equilibrium. For that purpose the space which is between a rheometer's plates is the most convenient device to monitor this reaction concerning a chemical and viscoelastic point of view. Therefore, here is proposed a chemo-rheology study that leads in the same time to the chemical kinetics equations and to the variation of the viscoelastic functions during the polymerization. In this way different catalysts are used and their efficiencies are compared as a function of their “basicity tank”. Whatever the experimental conditions involved are, viscosity versus polymer concentration or conversion shows a master curve for catalysts suitable to be used under extrusive conditions. Thus, only a few experiments are needed in order to develop a model which can be used to foresee the variation of the viscosity during the reaction.     

Towards a new definition of EPOC parameters for anionic electrochemical catalysts: case of propene combustion

The electrochemical promotion of catalysis (EPOC) of propene combustion was investigated using Pt sputtered thin film on an O²⁻ conductor, 8 mol% Y₂O₃-stabilized-ZrO₂ (YSZ). In order to separate the influence of the thermal migration of the O²⁻ oxide ions from the electrolyte to the catalyst surface and the impact of an electrical polarization on the catalytic activity, several light-off experiments (cool down and heat up procedures) were successively performed under different polarizations, i.e. OCV, +2 and −2 V. These experiments have clearly shown that the presence of O²⁻ (thermally or electrochemically induced) inhibits the catalytic activity of the platinum for the propene deep oxidation. These results demonstrate the importance to define a normalized rate enhancement ratio, ρ _n , from a reference value of the catalytic rate corresponding to a Pt surface state free of O²⁻ ions.     

Radiosity with Well Distributed Ray Sets

In this paper we present a new radiosity algorithm, based on the notion of a well distributed ray set (WDRS). A WDRS is a set of rays, connecting mutually visible points and patches, that forms an approximate representation of the radiosity operator and the radiosity distribution. We propose an algorithm that constructs an optimal WDRS for a given accuracy and mesh. The construction is based on discrete importance sampling as in previously proposed stochastic radiosity algorithms, and on quasi Monte Carlo sampling. Quasi Monte Carlo sampling leads to faster convergence rates and the fact that the sampling is deterministic makes it possible to represent the well distributed ray set very efficiently in computer memory. Like previously proposed stochastic radiosity algorithms, the new algorithm is well suited for computing the radiance distribution in very complex diffuse scenes, when it is not feasible to explicitly compute and store form factors as in classical radiosity algorithms. Experiments show that the new algorithm is often more efficient than previously proposed Monte Carlo radiosity algorithms by half an order of magnitude and more.     

3D soft-tissue tracking using spatial-color joint probability distribution and thin-plate spline model

Visual tracking techniques based on stereo endoscope are developed to measure tissue motion in robot-assisted minimally invasive surgery. However, accurate 3D tracking of tissue surfaces remains challenging due to complicated deformation, poor imaging conditions, specular reflections and other dynamic effects during surgery. This study employs a robust and efficient 3D tracking scheme with two independent recursive processes, namely kernel-based inter-frame motion estimation and model-based intra-frame 3D matching. In the first process, target region is represented in joint spatial-color space for robust estimation. By defining a probabilistic similarity measure, a mean-shift-based iterative algorithm is derived for location of the target region in a new image. In the second process, the thin-plate spline model is used to fit the 3D shape of tissue surfaces around the target region. An iterative algorithm based on an efficient second-order minimization technique is derived to compute optimal model parameters. The two processes can be computed in parallel. Their outputs are combined to recover 3D information about the target region. The performance of the proposed method is validated using phantom heart videos and in vivo videos acquired by the daVinci^®${\mathrm{daVinci}}^{\circledR }$ surgical robotic platform and a synthesized data set with known ground truth.     

Structure and functional complementation of engineered fragments from yeast phosphoglycerate kinase

Previous studies have shown that, although the isolated structuraldomains of yeast phosphoglycerate kinase recover a quasi-nativestructure in vitro as well as in vivo, they do not reassociatenor generate a functional enzyme. The aim of this work was firstto study the folding of complementary fragments different fromstructural domains and second to determine the requirementsfor their reassociation and functional complementation. Themethod used for producing rigorously defined fragments consistsof the introduction of a unique cysteinyl residue in the proteinfollowed by a specific cleavage by 5'5'-dithiobis(2-nitrobenzoate)/potassiumcyanide at this residue. Two pairs of complementary fragmentswere thus obtained, 1–96/97–415 and 1–248/249–415.The structure and stabilities of the different fragments werestudied. The short fragments, i.e. 1–96 and 249–415were found to contain some secondary structure, but to havea low stability. Each large fragment has a high structural contentand a stability close to that of the corresponding domain. Incontrast to that observed with the isolated domains, a weakbut significant complementation was observed for the two pairsof fragments; the pair of fragments 1–248/249–415recovered 8% of the activity of the native enzyme upon complementation.An independent refolding of the complementary fragments beforereassociation decreased the yield of complementation for thepair of fragments 1–96/97–415, but did not affectthe complementation for the other pair (1–248/249–415).From the present data and previous work on the isolated domains,it appears that the correct folding of the isolated fragmentsis not a prerequisite for their complementation.