Deduction of a facile method to construct Antheraea mylitta silk fibroin/gelatin blend films for prospective biomedical applications

Blend films of two types (I and II) were prepared by mixing Antheraea mylitta silk fibroin (AMF) and gelatin solution in various blend ratios via the solution casting method. Two different crosslinkers, namely glutaraldehyde and genipin, were used during blend preparation. The structural characteristics and thermal properties of the blend films were examined by Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD), Thermogravimetric analysis (TGA) and Diffrential scanning calorimetery (DSC). The FTIR spectra showed conformational alterations in type I blend films while type II films attained high β‐sheet crystallinity. The XRD diffractograms presented a high degree of crystallinity in type II blend films compared to type I, which showed an almost amorphous structure. Further, thermal and biological studies were conducted on type II films. According to the TGA thermograms, the degradation temperature of the crosslinked blend films shifted compared to pure gelatin and pure AMF films. Partial miscibility of the two components was indicated by DSC thermograms of the blends. The high water uptake capacity of type II blend films was found to imitate hydrogel behaviour. The blend films did not show any toxicity in 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide (MTT) assay and supported L929 fibroblast cell spreading and proliferation. The biodegradation of the blend films was significantly faster than the pure silk film. © 2020 Society of Industrial Chemistry     

Pull-Down of Metalloproteins in Their Native States by Using Desthiobiotin-Based Probes

One-third of all proteins are estimated to require metals for structural stability and/or catalytic activity. Desthiobiotin probes containing metal binding groups can be used to capture metalloproteins with exposed active-site metals under mild conditions so as to prevent changes in metallation state. The proof-of-concept was demonstrated with carbonic anhydrase (CA), an open active site, Zn²⁺-containing protein. CA was targeted by using sulfonamide derivatives. Linkers of various lengths and structures were screened to determine the optimal structure for capture of the native protein. The optimized probes could selectively pull down CA from red blood cell lysate and other protein mixtures. Pull-down of differently metallated CAs was also investigated.     

An efficient neural-network model for real-time fault detection in industrial machine

Neural Computing and Applications - Induction machines have extensive demand in industries as they are used for large-scale production and, therefore, vulnerable to both electrical and mechanical...     

Optimum operating conditions for an adsorption cryocooler: a case of activated carbon + nitrogen system

Adsorption cryocoolers are among the possible options for obtaining cryogenic temperatures, in particular for small cooling capacity applications such as cooling of infra red detectors. They need to be optimized for liquid yield. The performance of thermal compressors therein pivots around the adsorption characteristics of the adsorbent + adsorbate combination and how effectively one could pack requisite amounts of adsorbent into a given volume of the compressor housing. In addition, the overall performance of the cooler is a function of limits of operating temperatures and pressures across the compressor. This paper proposes a performance indicator—the product of liquid yield and the uptake efficiency of the compressor—and evaluates its values for various possible operating conditions for one specimen of activated carbon. It is shown that there is a limited domain of operation and that there is a condition of best performance within that domain.     

Heat transfer in dusty fluid with suspended hybrid nanoparticles over a melting surface

The melting effect with the magnetic field performs a significant role in various manufacturing and industrial applications, such as welding, casting, magma-solidification, nuclear engineering, and so forth. The present study focuses on the impact of the melting effect and magnetic field with inhomogeneous heat origination and sink. The formulation of the mathematical model is done by considering fluid with hybrid nanoparticles and dust particles in two different phases. We have considered Fe₂SO₄ and Cu as nanoparticles dispersed in the base fluid water along with suspended dust particles. The set of partial differential equations is reduced by using apt similarity variables and boundary conditions to obtain ordinary differential equations. The numerical solution is approximated using MATLAB-bvp4c adopting the shooting technique. The impact of numerous pertinent physical parameters on the velocity and thermal profiles is plotted and deliberated. Furthermore, the rate of heat flow and friction factor is also tabulated and visualized through the graphs. Streamlines are also drawn to know the behavior of the fluid flow. The rise in values of M_E quickly increases the velocity of the fluid motion but declines the thermal gradient and thickness of its related boundary layer. Also, inclining values of Pr enhance the thermal profile due to the impact of melting.     

Oviposition Preference and Performance of a Specialist Herbivore Is Modulated by Natural Enemies,Larval Odors,and Immune Status

Journal of Chemical Ecology - Insect herbivores frequently must balance host plant quality and the risk of attack by their natural enemies when making oviposition decisions. Yet, which factor is...     

Dynamic Embrittlement in Cu-Cr-Zr-Ti Alloy: Evidence of Intergranular Segregation of Sulphur

In the present investigation, Cu-0.6Cr-0.005Zr-0.0045Ti alloy was subjected to different heat treatment and thermomechanical treatment (TMT) to simulate the conditions experienced during brazing and forming, respectively. Grain coarsening was observed in the samples subjected to heat treatment, and grain refinement was observed in the samples subjected to TMT. Tensile tests conducted with these samples at room temperature and 600 °C have shown that Cu-Cr-Zr-Ti alloy was susceptible to dynamic embrittlement (DE). However, the observation was limited to coarse-grained samples (280-350 μm) at 600 °C. On the other hand, the fine-grained samples (20-40 μm) showed good ductility. Electron microscopy studies conducted on the tensile-tested specimens prone to DE indicated the presence of sulfur on the fractured surface and intergranular segregation of sulfur. Therefore, it can be inferred from the results that DE due to sulfur can occur in Cu-Cr-Zr-Ti alloy at elevated temperature for coarse-grained samples.     

Satellite- and ground-based measurements of CO2 over the Indian region: its seasonal dependencies,spatial variability,and model estimates

ABSTRACT

The present study demonstrates the distribution of carbon dioxide (CO₂) concentration over the Indian region and the surrounding oceanic regions during 2009–2012, using measurements from satellites viz., Greenhouse Gases Observing Satellite (GOSAT) and Atmospheric Infrared Sounder, Carbon Tracker (CT) model simulations and flask measurements from two Indian stations Sinhagad (SNG) (73°45′ E, 18°21′36″ N) and Cape Rama (CRI) (73°54′ E, 15°6′ N). The concentration of CO₂ is observed to be maximum during pre-monsoon and shows a decreasing phase during the post-monsoon season. In a regional scale, it is found that Indo-Gangetic Plain and northern India have relatively higher concentrations compared to the other regions. The probability distribution of the concentration differences shows that for most of the time, the differences lie between ±3 ppmv between GOSAT and CT. The comparison between the CO₂ flask measurements over SNG and CRI with respect to that of GOSAT and CT clearly reveals that the differences in CO₂ are as high as 10 ppmv between the ground- and satellite-based measurements. Further, we utilized the Lagrangian model FLEXible PARTicle (FLEXPART) to understand the source?receptor relationship over CRI, SNG, and over the equatorial Indian Ocean (IO). The source contributions from the northern and eastern continental regions of the Indian region are found to be more influential over SNG compared to CRI. It is also found from simulations that the equatorial IO has less influence from the continental source and therefore has a reduced seasonal variability compared to the other regions considered in the present study.