Parasitic-aware analytical modeling of integrated CMOS inductively degenerated narrow-band low noise amplifiers

In this paper, we present an analytical modeling methodology for fully integrated inductively-degenerated CMOS narrow-band cascode Low Noise Amplifiers (LNA) that captures short channel transistor effects to enable rapid design space exploration in current and future process technologies. The modeling methodology captures the impact of parasitics on passive components, ESD-protection structures, and devices to accurately predict both impedance matching and noise figure. Our modeling is suitable for numerical optimization and fully automated synthesis for LNAs. The results indicate that the methodology models ESD-protected LNA circuits with 47.9% better accuracy in noise figure when compared with several current analytical modeling techniques with four orders of magnitude improvement in simulation time over circuit-level simulation. Given its speed and accuracy, the analytical modeling methodology is well-suited for design space exploration.     

Radiation characteristics of an infinite dielectric-coated axiallyslotted cylindrical antenna partly embedded in a ground plane

The radiation characteristics of an axial slot on a dielectric-coated conducting circular cylinder embedded in a semi-circle in an infinite ground plane (GP) are examined. The boundary-value method is employed to obtain the solution with the aid of the partial orthogonality of the trigonometric functions. The resulting dual infinite series involved in the solution is then truncated to generate numerical results. The geometry considered here is important because it can be implemented on the body of any mobile communication system. Moreover the GP adds a new parameter to the slotted dielectric-coated conducting circular cylindrical antenna and can be used in beam shaping and to enhance the antenna performance     

Design techniques for reducing the impact of component variations on narrow-band low noise amplifiers

Given the increasing demand for integrated wireless systems in system-on-chip technology, narrow-band low noise amplifier (LNA) designs must be robust against variations in device parameters and passive component values to improve manufacturing yield for high volume applications. In this paper, we develop two design techniques for reducing the impact of component variations on narrow-band LNA performance. The results demonstrate that by increasing the bandwidth of the narrow-band LNA and applying more conservative design constraints, we can mitigate the reliability implications of process variations on impedance matching, gain, and power consumption.     

Technological Evaluation of Nitrogen Containing Starch Derivatives as Sizing Agents

The structural changes brought about by introducing different nitrogen containing groups via cyanoethylation, carbamoylethylation and carbamation in the molecules of rice and maize starches and oxidized starches derived thereof and the onset of these changes on the technical properties of yarns sized with such starch products were investigated. It was found that the apparent viscosity of pastes prepared from those products depends on the nature of starch, the degree of oxidation prior to chemical modification, the nature of modification as well as the measuring conditions, i. e. the rate of shear and temperature. Cotton yarns sized using these starch derivatives were measured for yarn number, tensile strength, C.V.%, elongation at break and C.V.% in elongation. Besides, the weavability test expressed as the minimum number of cycles due to abrasion (St₁) and average number of cycles due to abrasion (St₆) were investigated. A comparison among modified starches prepared from rice starch would reveral that the highest value of St₁ is obtained with yarns sized using carbamoylethylated sample derived from unoxidized starch. With maize starch, on the other hand, the highest value of St₁ is obtained with cotton yarns sized using carbamoylethylated starch derived from starch oxidized by 1 g/l active chlorine.     

Chemical Modification of Guaran Gum. Part 3: Carboxymethylation in non-Aqueous Medium

Guar gum was isolated from the seeds and subjected to modification via non-aqueous carboxymethylation. Highly substituted carboxymethyl guaran derivatives could be obtained via repeating the reaction four times, where a product of degree of substitution (D.S.) 2.07 was obtained indicating that the free hydroxyl groups of both glucose and mannose (which form the main constituents of guaran) can react with monochloro acetic acid. The modification increases the solubility of the gum in cold water, and increases the stability of its pastes to microorganisms. Pastes of these derivatives are characterized by non-Newtonian pseudoplastic behaviour regardless of their D.S. or the measuring temperature, while their apparent viscosity decreases by increasing the D.S. and/or the measuring temperature.     

Biochemical and physiological studies of certain ticks (Ixodoidea): Isolation and partial identification of a new fatty acid in eggs ofDermacentor andersoni Stiles (Ixodidae)

Gas liquid chromatographic analysis of the fatty acid methyl esters from eggs ofDermacentor andersoni Stiles (Ixodidae) revealed the presence of significant quantities (15% total fatty acids) of an unidentified component with a retention time between C_18∶3−C_22∶0 fatty acids. Smaller amounts of the unidentified component (ca. 5% total fatty acid) also were detected in host rabbit serum. Purified, the unidentified component's methyl ester collected from the tick eggs by preparative gas liquid chromatography was partially identified and characterized by chemical and spectroscopic analyses. The evidence suggests that the unidentified component is a methyl branched C₁₅ tricarboxylic acid containing two vicinal carboxylic acid groups. Biosynthesis of the unidentified component by the tick is under investigation.     

OXIDIZABLE COUPLING AGENTS: INTRODUCTION OF SURFACE FUNCTIONALITY

The synthesis and grafting to glass or quartz of alkylalkoxysilane coupling agents (RSi(OR') 3 ) that are susceptible/responsive to oxidation is described. Hydrosilylation of the inexpensive polyolefin squalene occurred efficiently once or twice with the silane HMe 2 SiOSiMe 2 (CH 2 ) 2 Si(OEt) 3 to give a silane coupling agent 3 that possesses several alkene groups. Once grafted to a silica surface Q-Sq using traditional means, the coupling agent was oxidized and further processed in several different ways. First, epoxidation using soluble peracids led to polyepoxides that could be further hydrolyzed to give polyalcohol surfaces Q-Sq-PAA-H 2 O . Alternatively, ozonolysis with gaseous O 3 led to the ozonides Q-Sq-O 3 , which could be decomposed to give either aldehyde/ketone Q-Sq-O 3 -redu , or ketone/carboxylic acid groups Q-Sq-O 3 -H 2 O 2 , respectively, bound to the surface. The aldehyde/ketone groups were characterized by condensation with dinitrophenylhydrazine to give the highly colored hydrazones Q-Sq-O 3 -redu-DNPH . These studies demonstrate the ready portability of organic chemistry to silica (or related) surfaces using judiciously chosen silane coupling agents and the possibility of controlling surface functionalization by postgrafting oxidation.     

Simulation of a cylindrical reflector by conducting circular cylinders

A cylindrical reflector is simulated byNparallel circular conducting cylinders of arbitrary radius and distribution along the trajectory of the continuous reflector surface. The resulting radiation pattern of the transmitting reflector antenna is computed as the backscattering pattern of the circular cylinders due to a line source excitation. The results for largeNare compared with published data for a cylindrical parabolic reflector by Kinzel and for a corner reflector by Tsai. It is shown that the beamwidth and first sidelobe level can be improved by using cylinders of unequal radii and spacing but that, contrary to expectation, further improvement by increasing the number of cylinders is not necessarily possible.     

An approximation of Planck's formula for the inverse black body radiation problem

A modification to the Hamid-Ragheb approximation leads to a new approximate formula for the Planck's radiation law valid at all frequencies. The modified regime is useful in solving the inverse black body radiation problem in closed form. The absolute percentage errors in constructing the area-coldness distribution due to the proposed and previous approximations are presented. The results suggest that our modified approximation to Planck's law is more suitable than all other approximations at all frequencies.     

Fusion-fission hybrid design with analysis of direct enrichment and non-proliferation features (the SOLASE-H study)

The role of a fusion-fission hybrid in the context of a nuclear economy with and without reprocessing is examined. An inertial confinement fusion driver is assumed and a consistent set of reactor parameters are developed. The form of the driver is not critical, however, to the general concepts. The use of the hybrid as a fuel factory within a secured fuel production and reprocessing center is considered. Either the hybrid or a low power fission reactor can be used to mildly irradiate fuel prior to shipment to offsite reactors thereby rendering the fuel resistant to diversion. A simplified economic analysis indicates a hybrid providing fuel to 10 fission reactors of equal thermal power is insensitive to the recirculating power fraction provided reprocessing is permitted. If reprocessing is not allowed, the hybrid can be used to directly enrich light water reactor fuel bundles fabricated initially from fertile fuel (either ThO₂ or ²³⁸UO₂). A detailed neutronic analysis indicates such direct enrichment is feasible but the support ratio for ²³³U or ²³⁹Pu production is only 2, making such an approach highly sensitive to the hybrid cost. The hybrid would have to produce considerable net power for economic feasibility in this case. Inertial confinement fusion performance requirements for hybrid application are also examined and an integrated design, SOLASE-H, is described based upon the direct enrichment concept.