CFD Modeling of Active Volume Creation in a Non‐Newtonian Fluid Agitated by Submerged Recirculating Jets

Computational fluid dynamics (CFD) models were employed to investigate flow conditions inside a model reactor in which yield stress non‐Newtonian liquid is mobilized using submerged recirculating jets. The simulation results agree well with the experimental results of active volume in the reactor obtained using flow visualization by the authors in a previous study. The models developed are capable of predicting a critical jet velocity (v_c) that determines the extent of active volume obtained due to jet mixing. The v_c values are influenced both by the rheological properties of the liquid and the nozzle orientation. The liquid with higher effective viscosity leads to higher v_c for a downward facing injection nozzle. However, an upward facing injection nozzle along with a downward facing suction nozzle generates enhanced complementary flow fields which overcome the rheological constraints of the liquid and lead to lower v_c.     

Optimized species growth in epoxy polymerization with real-coded NSGA-II

Satisfaction of twin objectives of maximization of M_n along with minimization of PDI do not necessarily guarantee the maximization of concentration of desired species in a semibatch epoxy polymerization process. As the final product consists of a number of polymer species, a need is felt to perform an advanced optimization study to come up with such process conditions for which the selective growth of a particular polymer species is maximized in minimum possible processing time and the population of other species should be at their lowest values. These above-mentioned conflicting objectives frame the platform for a multi-objective optimization problem, which is solved here using a real-coded non-dominated sorting genetic algorithm or NSGA II and Pareto optimal solutions are obtained. The decision variables are discrete addition rates of various ingredients, e.g. the amount of addition of bisphenol-A (a monomer), sodium hydroxide and epichlorohydrin at different time steps. All species balance equations, bounds on M_n, PDI and addition amounts are treated as constraints. Results are very promising in terms of optimized operations for selective enhancement of desired polymer species for the epoxy polymerization process. Total additions are kept very close to available experimental conditions to minimize probable extrapolation errors. It has been observed that preferential oligomer production is extremely difficult for epoxy polymerization. Lower chain polymers are the only choice for a good quality, stable polymer product.     

ENROUTE: An Entropy Aware Routing Scheme for Information-Centric Networks (ICN)

With the exponential growth of end users and web data, the internet is undergoing the change of paradigm from a user-centric model to a content-centric one, popularly known as information-centric networks (ICN). Current ICN research evolves around three key-issues namely (i) content request searching, (ii) content routing, and (iii) in-network caching scheme to deliver the requested content to the end user. This would improve the user experience to obtain requested content because it lowers the download delay and provides higher throughput. Existing researches have mainly focused on on-path congestion or expected delivery time of a content to determine the optimized path towards custodian. However, it ignores the cumulative effect of the link-state parameters and the state of the cache, and consequently it leads to degrade the delay performance. In order to overcome this shortfall, we consider both the congestion of a link and the state of on-path caches to determine the best possible routes. We introduce a generic term entropy to quantify the effects of link congestion and state of on-path caches. Thereafter, we develop a novel entropy dependent algorithm namely ENROUTE for searching of content request triggered by any user, routing of this content, and caching for the delivery this requested content to the user. The entropy value of an intra-domain node indicates how many popular contents are already cached in the node, which, in turn, signifies the degree of enrichment of that node with the popular contents. On the other hand, the entropy for a link indicates how much the link is congested with the traversal of contents. In order to have reduced delay, we enhance the entropy of caches in nodes, and also use path with low entropy for downloading contents. We evaluate the performance of our proposed ENROUTE algorithm against state-of-the-art schemes for various network parameters and observe an improvement of 29–52% in delay, 12–39% in hit rate, and 4–39% in throughput.

     

The laminar/turbulent transition in a sludge pipeline

Globally, wastewater treatment plants are under pressure to handle high concentration sludge in a sludge treatment line. Unawareness of the non-Newtonian behaviour of the thickened sludge has the potential to cause unexpected problems when the fluid behaviour changes from turbulent to laminar flow. In this study, sludge apparent viscosity was plotted as a function of total suspended solids concentration (TSS) and shear rate. Then, the transition velocity based on several predictive models in the literature was determined. This analysis provides a practical basis for the prediction of the pipe flow behaviour of thickened sludge in troubleshooting and engineering design.     

Study on Properties of Hyper-duplex Stainless Steel 7A of ASTM A-890 (CD3MWN)

Hyper-duplex stainless steel castings of grade 7A of ASTM A-890 are comparatively new in duplex series, and their regular production has not yet been started like other super-duplex grades 5A and 6A. In view of this, a study has been undertaken to find out the properties of this grade under different experimental conditions. Tensile properties and hardness are found to be higher than other super-duplex grades; however, impact values at − 50 °C are lower than grade 6A. Pitting corrosion, critical pitting temperature and intergranular corrosion tests were carried out as per ASTM standard. Potentiodynamic polarization scan was carried out and compared with 6A. Deleterious phases were formed by holding samples for a shorter time at 1000 °C with a corresponding increase in hardness and drop in ferrite content. 475 °C embrittlement effect was studied and compared with other duplex grades. Re-dissolution of harmful precipitates was carried out at 550 °C by varying time to study any change in properties. Some of the properties of grade 7A were compared with wrought product of hyper-duplex grade, UNS S32707. Low-temperature impact values of hot-worked cast 7A test block were improved considerably in both longitudinal and transverse direction. Dry sliding wear resistance test was carried out as per ASTM standard, and values were found to be better than grade 6A.     

Optimization of biohydrogen production by Clostridium butyricum EB6 from palm oil mill effluent using response surface methodology

Clostridium butyricum EB6 successfully produced hydrogen gas from palm oil mill effluent (POME). In this study, central composite design and response surface methodology were applied to determine the optimum conditions for hydrogen production (P_c) and maximum hydrogen production rate (R_max) from POME. Experimental results showed that the pH, temperature and chemical oxygen demand (COD) of POME affected both the hydrogen production and production rate, both individually and interactively. The optimum conditions for hydrogen production (P_c) were pH 5.69, 36 °C, and 92 g COD/l; with an estimated P_c value of 306 ml H₂/g carbohydrate. The optimum conditions for maximum hydrogen production rate (R_max) were pH 6.52, 41 °C and 60 g COD/l; with an estimated R_max value of 914 ml H₂/h. An overlay study was performed to obtain an overall model optimization. The optimized conditions for the overall model were pH 6.05, 36 °C and 94 g COD/l. The hydrogen content in the biogas produced ranged from 60% to 75%.     

Development of a PCR assay for the detection of nifH and nifD genes in indigenous photosynthetic bacteria

Molybdenum (Mo) nitrogenases consist of two components: dinitrogenase reductase (encoded by nifH) and the dinitrogenase or MoFe protein (encoded by nifDK). Nitrogenase enzyme of photosynthetic bacteria is responsible for hydrogen production. Therefore, primers were designed for the nitrogenase gene only. In this study, two primers (ND and NH) were designed after comparative genomic analysis of nifH and nifD gene sequences from public databases. The designed primers were used for the amplification of nifH and nifD genes to detect nitrogenase genes in photosynthetic bacteria. Initial detection was done using a monoplex Polymerase Chain Reactions (PCRs) followed by optimization of the PCR protocols. Subsequently, a duplex PCR was designed for amplification and detection of nifH and nifD genes in indigenous photosynthetic bacteria. Evaluation of the duplex PCR on six samples isolated from Palm Oil Mill Effluent (POME) showed that only four isolates contained both the nifH and nifD genes, indicating that these isolates were potential hydrogen-producing bacteria. PCR detection provides a rapid and efficient pre-identification of potential photosynthetic bacterial hydrogen producers.     

The HLA A1-B8 haplotype extends 6 Mb beyond HLA-A: associations between HLA-A, B, F and 15 microsatellite markers

Ornithodoros (Alectorobius) amblus Chamberlin 1920 specimens were collected from a seagull (Larus spp.) nest in northern Chile. This reports the occurrence of this species outside Peru. The biology of 79 specimens reared under laboratory conditions at 27 degrees C, 75-80% RH, and total darkness was determined. A 13% mortality rate from larval to adult was observed. Larval ticks were fed on chicks, Gallus gallus domesticus; and nymphs and adults were fed on chickens. We recorded the number of eggs per female per gonotrophic cycle and the mean duration of the periods of preoviposition, oviposition, and incubation. The total duration of their life cycle ranged from 111 to 239 d, depending on the number of molts. Males were found after the 4th molt, and after the 5th molt the proportion of females was greater than that of males or remaining nymphs. The feeding period of larvae was 4-6 d, N1 nymphs do not feed. The N2-N6 nymphs, males and females, had a 10- to 60-min feeding period. From N2 on, there was emission of coxal fluid while on the host and during or immediately after feeding.     

A Mean Phi Model for Pressure Filtration of Fine and Colloidal Suspensions

A working model for engineering analysis of pressure filtration is presented. Based on the filtration characteristics of fine and colloidal suspensions, the process was divided into two stages. A time‐invariant spatially uniform volume fraction of solids approximation is invoked in the growing filter cake stage (stage 1). A time‐dependent spatially uniform volume fraction of solids assumption is made in the cake consolidation stage (stage 2). The two models, named collectively as Mean Phi (M‐P) model, have a common physical basis, seamless continuity between the stages and internal consistency. The M‐P model has only three parameters: terminal or equilibrium volume fraction of solids in the filter cake that is related to its compressive yield stress, critical volume fraction of solids, which joins stage 1 and stage 2, and a permeability factor, which is common to stages 1 and 2. The model is validated with a large number of colloidal suspensions filtered under highly diverse physical‐chemical process conditions. A Pareto profile is identified that relates the timescale of filtration and the extent of dewatering achieved, the two most important performance indices of the process.