Effect of titanium substitution on the structure and properties of Fe3Al-based intermetallic alloys

Substitutions (0–16 at%) of titanium for iron in Fe₃Al-based alloys rapidly solidified by chill-block melt-spinning stabilize the D0₃ and B2 ordered structures. Rapid solidification results in total suppression of D0₃ order in binary alloys, whereas alloys containing titanium have D0₃ structure. D0₃ and B2 antiphase domain size, lattice parameter and hardness increase with increasing titanium content of the alloy. The deformation mode changes from single (unit) bcc dislocation in binary alloys to two-fold superdislocation configuration in D0₃Fe₃Al-Ti alloys. Mechanical antiphase boundaries are generated by the movement of these imperfect configurations. All the alloys exhibited cleavage tensile failure. The mechanical properties are correlated with the observed structural changes.     

2,2′-oxo-1,1′-azobenzene: microbial transformation of rye (Secale cereale L.) allelochemical in field soils byAcinetobacter calcoaceticus: III

Acinetobacter calcoaceticus, a gram-negative bacterium isolated from field soil, was found to be responsible for the biotransformation of 2(3H)-benzoxazolinone (BOA) to 2,2-oxo-1,1-azobenzene (AZOB). Experiments were conducted to evaluate the transformation of BOA to AZOB by this microbe in sterile and nonsterile soil. Transformation studies with soils inoculated withA. calcoaceticus indicated that the production of AZOB increased linearly with the concentration of BOA in sterile soil and showed a quadratic trend in nonsterile soils. This also indicated that all soil types studied for the transformation experiments might containA. calcoaceticus capable of the conversion of benzoxazolinones.     

Grafting of vinyl monomers onto silk fibers: Trivalent-manganese-initiated graft copolymerization of acrylamide onto silk fibers

Graft copolymerization of acrylamide (AM) onto silk fibers, using Mn(III)–sulphate as initiator, has been investigated, in aqueous sulphuric acid in the temperature range of 30–55°C. Grafting reaction has been studied by varying the concentration of monomer, Mn(III), sulphuric acid, temperature, and also with the modified silk. The graft yield increases significantly with increase of monomer concentrations to the extent of 0.85M, after which the rate falls. With increase in Mn(III) concentration and H⁺ ion concentration the graft yield increases, but after an optimum concentration a depression in the graft yield is noticed. The rate of the reaction is temperature-dependent; with increase of temperature the graft-on increases. Among the solvent composition studied a solvent/water mixture containing 10% of the solvent seems to constitute the most favorable medium for grafting, and a further increase of solvent composition decreases the graft yield. The effect of various additives such as transition metal salts, aromatic and heterocyclic amines on grafting reaction has been studied. A suitable mechanism for grafting has been proposed. Finally physical characterization such as thermal analysis (TGA) of the grafted samples has been carried out in order to ensure grafting and to study the change in the properties of the fibers.     

Probabilistic risk analysis of corrosion associated failures in cast iron water mains

This paper proposes a method using probabilistic risk analysis for application to corrosion associated failures in grey cast iron water mains. External corrosion reduces the capacity of the pipeline to resist stresses. When external stresses exceed the residual ultimate strength, pipe breakage becomes imminent, and the overall reliability of a water distribution network is reduced. Modelling stresses and external corrosion acting on a pipe involves uncertainties inherent in the mechanistic/statistical models and their input parameters. Monte Carlo (MC) simulations were used to perform the probabilistic analysis. The reduction in the factor of safety (FOS) of water mains over time was computed, with a failure defined as a situation in which FOS becomes smaller than 1. The MC simulations yielded an empirical probability density function of time to failure, to which a lognormal distribution was fitted leading to the derivation of a failure hazard function. A sensitivity analysis revealed that the contribution of corrosion parameters to the variability of time to failure was more significant than the combined contributions of all other parameters. Areas where more research is needed are identified.     

Nutritional and nutraceutical comparison of Jamaican Psidium cattleianum (strawberry guava) and Psidium guajava (common guava) fruits

Psidium cattleianum (strawberry guava) is one of many underutilised edible fruits that grow wild in Jamaica, and could potentially be commercially exploited to yield health and economic benefits. In this study, the total phenolics, proximate contents, and antioxidant, anti-inflammatory, and antimicrobial activities of P. cattleianum and P. guajava (common guava), a well-known species, were compared. Strawberry guavas were found to be superior to common guavas in antioxidant and antimicrobial activities, total phenolics and vitamin C content. They also possessed relatively high fibre content (24.9%). The hexane and ethyl acetate extracts of strawberry guavas showed cyclooxygenase-2 enzyme inhibitory activities of 18.3% and 26.5%, respectively (250 μg/mL), indicating anti-inflammatory activity. The EtOAc and MeOH extracts of P. guajava showed 56.4% (COX-2) and 44.1% (COX-1) inhibitory activity, respectively. Additionally, nine compounds were isolated from strawberry guava fruits, some of which demonstrated anti-inflammatory activity. These results indicate that strawberry guavas are beneficial for health.     

Performance and emission evaluation of a diesel engine fueled with methyl esters of rubber seed oil

Recent concerns over the environment, increasing fuel prices and scarcity of its supply have promoted the interest in development of the alternative sources for petroleum fuels. At present, biodiesel is commercially produced from the refined edible vegetable oils such as sunflower oil, palm oil and soybean oil, etc. by alkaline-catalyzed esterification process. This process is not suitable for production of biodiesel from many unrefined non-edible vegetable oils because of their high acid value. Hence, a two-step esterification method is developed to produce biodiesel from high FFA vegetable oils. The biodiesel production method consists of acid-catalyzed pretreatment followed by an alkaline-catalyzed transesterification. The important properties of methyl esters of rubber seed oil are compared with other esters and diesel. Pure rubber seed oil, diesel and biodiesel are used as fuels in the compression ignition engine and the performance and emission characteristics of the engine are analyzed. The lower blends of biodiesel increase the brake thermal efficiency and reduce the fuel consumption. The exhaust gas emissions are reduced with increase in biodiesel concentration. The experimental results proved that the use of biodiesel (produced from unrefined rubber seed oil) in compression ignition engines is a viable alternative to diesel.     

The role of rotation speed on intermetallic compounds formation and mechanical behavior of friction stir welded brass/aluminum 1050 couple

In this paper, the intermetallic compounds formation during dissimilar friction stir welding of brass to aluminum 1050 and its effect on the mechanical behavior of joint were studied. Scanning Electron Microscopy (SEM), Energy dispersive spectroscopy analysis (EDS) and X-ray Diffraction analysis were used to characterize intermetallics. In addition, tensile tests and microhardness measurements were performed to evaluate mechanical properties. The results showed that utilizing rotation speeds higher than 400 rpm leads to gradual formation of intermetallic compounds in the stir zone and at the interface. CuAl₂ is the dominant compound in the composite structure of the stir zone, whereas four intermetallic bands are detected at the interface. From aluminum to brass, two middle layers were formed. Then, CuAl₂, Cu₉Al₄ and CuZn were detected. The increase in rotation speed is accompanied by thickening and development of interfacial intermetallic compounds. The optimum rotation speed of 450 rpm yielded a narrow interfacial intermetallic compound and a lamellar composite structure within the stir zone which enhances the tensile strength of the weld. On the other hand, further increase of rotation speed lowers the tensile strength of the weld which is accompanied by disappearance of lamellar composite structure, increment of weld defects and thickening of interfacial intermetallic layer.     

An improved auto-tuning scheme for PI controllers

Ziegler-Nichols tuned PI and PID controllers are usually found to provide poor performances for high-order and nonlinear systems. In this study, an improved auto-tuning scheme is presented for Ziegler-Nichols tuned PI controllers (ZNPICs). With a view to improving the transient response, the proportional and integral gains of the proposed controller are continuously modified based on the current process trend. The proposed controller is tested for a number of high-order linear and nonlinear dead-time processes under both set-point change and load disturbance. It exhibits significantly improved performance compared to ZNPIC, and Refined Ziegler-Nichols tuned PI controller (RZNPIC). Robustness of the proposed scheme is established by varying the controller parameters as well as the dead-time of the process under control.     

Radiation-Induced Senescence Reprograms Secretory and Metabolic Pathways in Colon Cancer HCT-116 Cells

Understanding the global metabolic changes during the senescence of tumor cells can have implications for developing effective anti-cancer treatment strategies. Ionizing radiation (IR) was used to induce senescence in a human colon cancer cell line HCT-116 to examine secretome and metabolome profiles. Control proliferating and senescent cancer cells (SCC) exhibited distinct morphological differences and expression of senescent markers. Enhanced secretion of pro-inflammatory chemokines and IL-1, anti-inflammatory IL-27, and TGF-β1 was observed in SCC. Significantly reduced levels of VEGF-A indicated anti-angiogenic activities of SCC. Elevated levels of tissue inhibitors of matrix metalloproteinases from SCC support the maintenance of the extracellular matrix. Adenylate and guanylate energy charge levels and redox components NAD and NADP and glutathione were maintained at near optimal levels indicating the viability of SCC. Significant accumulation of pyruvate, lactate, and suppression of the TCA cycle in SCC indicated aerobic glycolysis as the predominant energy source for SCC. Levels of several key amino acids decreased significantly, suggesting augmented utilization for protein synthesis and for use as intermediates for energy metabolism in SCC. These observations may provide a better understanding of cellular senescence basic mechanisms in tumor tissues and provide opportunities to improve cancer treatment.