Effect of 100 KeV Ar+ ion beam irradiation on ZnO thin films – Influence of morphology vis-a-vis electrode/electrolyte interface and its impact on photoelectrochemical water splitting

The present study attempts quantitative determination of changes in the morphological surface features viz. fractal dimension, lower and upper cut off length scale through Power Spectral Density analysis prior to and after irradiation of 100 KeV Ar⁺ ion beam at incidence angles of 0°, 40° and 60° on ZnO thin films. All the unirradiated and irradiated samples are subjected to photoelectrochemical characterization and a correlation between photoelectrochemical performance and morphological parameters is established. Sample irradiated at 40° angle at the fluence of 5 × 10¹⁶ ions/cm² is found to possess maximum fractal dimension of 2.72, lower and upper cut off length scale of 3.16 nm and 63.00 nm respectively. This sample exhibits maximum photocurrent density of 3.19 mA/cm² and applied bias photon-to-current efficiency of 1.12% at 1.23 V/RHE. Hydrogen gas collected for duration of 1 h for the same sample was ~4.83 mLcm^?2.     

Mathematical modelling and numerical simulation of ordered porosity metal materials formation

Ordered porosity metal materials belong to a relatively new class of porous materials named gasars. This paper presents a mathematical model of the complex physical phenomena in the production of gasars. Analyses for heat transfer, solidification kinetics and gas diffusion were coupled to describe the formation of unique gasar structure. Several criterial functions were introduced to provide significant quantitative information about the relationship between the operating technological parameters and the final structure. The computational outcomes of the numerical simulation were compared with the characteristics of real gasar ingots. The model was applied to determine the boundary conditions that would provide approximately constant physical conditions on the solidification front. The structure sensitiveness of gasars with respect to the different technological parameters is discussed.     

A prospective study of closure techniques of abdominal incisions in infants and children

In a prospective study of layered versus mass closure of abdominal incisions in infants and children, 34 cases underwent wound closure by layered and mass closure technique on an alternate basis. All the patients were assessed for their nutritional status and haemoglobin level pre-operatively, and wound complications were compared with respect to closure technique, nutritional status and normal haemoglobin level. Presence of protein energy malnutrition and anaemia did not increase the risk of wound complications with either of the technique.     

Corrosion characteristics of aluminium alloy graphite particulate composite in various environments

The present study was aimed at understanding the response of 2014 Al alloy dispersed with graphite particles in various corrosive environments. Marine (sodium chloride) as well as acidic media were selected for the purpose with a view to widen the range of utility of the composite for applications where such environments may be encountered. Studies were also extended to characterize the corrosion resistance of the composite in fresh as well as used lubricating oils to explore the possibilities of using it in bearing, bushing and such other applications. The corrosion behaviour of the base alloy processed under identical conditions was also examined in the above media to see the influence of graphite addition in the alloy. In order to assess the role of the matrix microstructure, the composite as well as the base alloy was subjected to corrosion in heat-treated as well as-cast conditions. It was observed that the specimens suffered from the maximum rate of corrosion in acid, while sodium chloride produced the minimum corrosion rate. Oil in both used and fresh conditions revealed a negligibly small extent of corrosion. The composite was found to show a higher rate of corrosion than the base alloy under identical test conditions. This was attributed to the dispersoid/matrix interfacial corrosion in the case of the graphitic aluminium alloy. Heat treatment of the composite and the base alloy was found to lower the rate of corrosion in the environments tested. Microstructural modifications of the matrix and possible relief of residual stresses were thought to be responsible for the lower rate of corrosion in the heat-treated condition.     

SURFACE TENSION AND BUOYANCY DRIVEN INSTABILITIES IN A LAYER OF LIQUID TIN HEATED FROM BELOW

The linear theory of Pearson (1958) and Nield (1964) is modified here to study liquid tin and include the finite thermal resistances of the bounding layers of boron nitride, copper and air (∼10^-2 torr) in the experiments of Ginde et al. (1989). The magnitude of the ΔT_c across the layer of liquid tin required for the onset of convection depends on the ratios of the thermal conductivities and thicknesses of the supporting layers of boron nitride and copper to those of the tin.

According to our theory surface tension contributes more than buoyancy to the instability observed experimentally. The critical ΔT_c observed required for the onset of convection in the layer of tin, is up to 25% lower than that predicted, which shows the layer is less stable than the theory indicates. Thus the surface of the tin was uncontaminated, or a significantly larger observed critical ΔT_c would be expected.

The boundary condition on the thermal fluctuations at the base of the supporting layer of copper does not appear to be important in these experiments. However, the thermal resistance of the boron nitride would have to be assumed to be unrealistically large to obtain agreement within experimental error with the theory.     

Electrochemistry of polyaniline: Study of the pH effect and electrochromism

Polyaniline was electrochemically synthesized from an aqueous medium with various acid electrolytes via potentiodynamic and potentiostatic techniques. The electrochemical synthesis of polyaniline was studied over various substrates, including Pt, Ti, Ni, and SnO₂ coated glass, and in various acid electrolytes. Cyclic voltammograms of electrochemically synthesized polyaniline were studied in HCl in a pH range of 1–4. Probable electrochemistry and chemical changes were deduced that occurred when polyaniline film was electrochemically oxidized and reduced between ?0.2 and 1.0 V versus a Ag/AgCl reference electrode in an acidic electrolyte at pH 1, and three corresponding oxidation and reduction peaks were described instead of two redox peaks (as observed by W. S. Huang, B. D. Humphrey, and A. G. MacDiarmid, J Chem Soc Faraday Trans 1 1986, 82, 2385). The electrochromic property was studied with changes in the chemical states of polyaniline during electrochemical oxidation and reduction. A new viscous electrolyte, aqueous AlCl₃ (pH 2), saturated with AgCl was used for the construction of an electrochromic display device. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 378–385, 2002     

Rolling contact fatigue behavior of sintered and hardened steels

Powder-metal-processed bearings and gears are finding increasing application because of their economical and technical advantages. The residual pores from the sintering operatives act as lubricant pockets and dampen sound and vibration. However, porosity also decreases the mechanical strength and reduces the life of components fabricated by powder processing relative to similar wrought components. The rolling contact fatigue behavior of sintered and heat treated steel rollers was investigated using a fatigue test machine designed and fabricated for that purpose. The powder-metal-processed and the wrought steel rollers that were tested had similar composition and hardness and were mated against wrought steel rollers of high hardness. The contact stress versus number of cycles to failure data showed that the wrought steel had a very high endurance limit under rolling contact fatigue compared to the sintered steels investigated. Rolling contact fatigue behavior was found to depend on the porosity present in the material. Large surface peeling failures and pitting type fatigue failures were observed in the sintered and hardened steels, while only pitting type failures were observed in the wrought steels