Tensile testing and fracture mechanism analysis of polyvinyl alcohol nanofibrous webs

A tensile properties testing study was conducted to understand the influence of thickness, cross-head speed (speed of testing), gauge length (GL; specimen test length), and sample shape on important tensile properties of polyvinyl alcohol (PVA) nanofiber webs. The effects of each testing parameter on load at break, extension at break, Young's modulus, and tensile stress–strain curve of PVA nanofiber webs are analyzed. The Welch two sample t-tests show the significant difference among tested data. Using interaction plots, two-way analysis of variance, and margin mean plots, the interaction effects among testing parameters have been analyzed. Of all the factors, cross-head speed, the interaction among GL, and sample thickness (GL: Thickness) and the interaction among GL, testing speed and sample thickness (GL: Speed: Thickness) have significant influence on the tensile properties of PVA nanofiber webs. Moreover, the hypothesized model of mechanism of tensile strain–stress curve of PVA nanofiber webs has been proposed. Based on the model, the tensile strain–stress curve can be split into three stages: linear elastic, partial break up, and complete breakage. This study will provide a better understanding of tensile testing parameters' effects and their interaction effects on the tensile properties of nanowebs.     

Machine independent AND and OR parallel execution of logicprograms. I. The binding environment

We describe a binding environment for the AND and OR parallel execution of logic programs that is suitable for both shared and nonshared memory multiprocessors. The binding environment was designed with a view of rendering a compiler using this binding environment machine independent. The binding environment is similar to closed environments proposed by J. Conery. However, unlike Conery's scheme, it supports OR and independent AND parallelism on both types of machines. The term representation, the algorithms for unification and the join algorithms for parallel AND branches are presented in this paper. We also detail the differences between our scheme and Conery's scheme. A compiler based on this binding environment has been implemented on a platform for machine independent parallel programming called the Chare Kernel     

A 4.5-GHz 130-nm 32-KB L0 cache with a leakage-tolerant self reverse-bias bitline scheme

This paper describes a 32-KB two-read, one-write ported L0 cache for 4.5-GHz operation in 1.2-V 130-nm dual-V/sub TH/ CMOS technology. The local bitline uses a leakage-tolerant self reverse-bias (SRB) scheme with nMOS source-follower pullup access transistors, while preserving robust full-swing operation. Gate-source underdrive of -220 mV on the bitline read-select transistors is established without external bias voltages or gate-oxide overstress. Device-level measurements in the 130-nm technology show 72/spl times/ bitline active leakage reduction, enabling low-V/sub TH/ usage, 40% bitline keeper downsizing, and 16 bitcells/bitline. 11% faster read delay and 2/spl times/ higher dc noise robustness are achieved compared with high-performance dual-V/sub TH/ bitline scheme. Sustained performance and robustness benefits of the SRB technique against conventional dynamic bitline with scaling to 100- and 70-nm technology is also presented.     

Theoretical Investigation of Metal Cladding for Nanowire and Cylindrical Micropost Lasers

We investigate the transverse modal properties of cylindrical subwavelength metal-clad nanowire and micropost lasers via rigorous theoretical waveguide analysis, including the effects of finite thickness metal cladding and gain in the core. The results of this analysis show that air-metal surface guided TM₀₁ and some hybrid surface guided modes suffer less loss but are less confined to the core, while core-metal surface guided modes are better confined to the core but suffer greater loss. An increase in the thickness of the metal cladding reduces the loss of the core-metal surface guided modes. The modal gain and confinement of the metal-clad cavity are compared to an unclad cavity.     

Unconstrained and constrained motion control of a planar two-link structurally flexible robotic manipulator

Unconstrained and constrained motion control of a planar two-link structurally-flexible robotic manipulator are considered in this study. The dynamic model is obtained by using the extended Hamilton's principle and the Galerkin criterion. A method is presented to obtain the linearized equations of motion in Cartesian space for use in designing the control system. The approach to solving the control problem is to use feedforward and feedback control torques. The feedforward torques maneuver the flexible manipulator along a nominal trajectory and the feedback torques minimize any deviations from the nominal trajectory. The feedforward and feedback torques are obtained by solving the inverse dynamics problem for the rigid manipulator and designing linear quadratic Gaussian with loop transfer recovery (LQG/LTR) compensators, respectively. The LQG/LTR design methodology is exploited to design a robust feedback control system that can handle modeling errors and sensor noise, and operate on Cartesian space trajectory errors. Computer simulated results are presented for an example planar, two-link, structurally flexible robotic manipulator. © 1994 John Wiley & Sons, Inc.     

VOID FRACTION PROFILES IN PLANE-POISEUILLE FLOW OF VISCOELASTIC FOAMS

This investigation focuses on slow, isothermal, two-phase flow of gas bubble suspensions in Separan solutions, prepared with the help of a sodium borohydride blowing agent at room temperature. The total residence time in these experiments is much smaller than characteristic times for growth or rise of bubbles. The variation of bubble volume fraction across a narrow gap between two planes, is recorded at two locations along the flow direction. This is done with a Cesium gamma-radiation source focused on a region of area.012 cm² in the flow plane, and a Sodium iodide detector across the channel yielding a resolution of.01 over the range of void fractions investigated from.02 to.08. This measurement allows us to identify conditions under which the two-phase flow may be described by a two fluid model with a uniform bubbly core and a bubble free wall layer. With this two phase flow structure, a relative viscosity equation for the suspension is used to compute an apparent viscosity. Such calculations indicate that the observed reduction in apparent viscosity for the two phase flow may be attributed to a bubbly core which is more shear thinning than the medium. The additional shear thinning factor for the suspension is related to the elasticity of the medium.     

Compositional trend analysis on poly(phenylene ether) based thermoplastic elastomers

Detailed statistical trend analysis of thermoplastic elastomers based on poly (phenylene ether) (PPE), polystyrene (PS), ethylene vinyl acetate (EVA) and styrene‐ethylene‐butylene‐styrene (SEBS) was done through Design Expert software by Stat‐Ease. D optimal crossed design was followed to capture the interaction with the parameters. Effect of blend ratio, vinyl acetate (VA) content of EVA, molecular weight (MW) of SEBS and intrinsic viscosity (IV) of PPE on the blend performance (response) was studied in detail. Design of Experiment (DOE) analysis showed the “optimized formulation” of the blend. Increase in PPE‐polystyrene (PS) content increased tensile strength and modulus of the blend, followed by a decrease in strain at break. However, EVA had a reverse effect on tensile strength and modulus. Strain at break increased significantly with increasing SEBS content in the blend. Graphical and numerical optimization showed that superior mechanical properties (tensile strength, strain at break and modulus) could be achieved at VA content ～ 50% at a particular loading of EVA. Low MW SEBS was found to be more compatible with the other components of the blend. Mechanical properties of the quaternary blend were marginally affected with change in IV of PPE in the range of 0.33 to 0.46. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Quality characteristics of edible vegetable oil blends

Two edible oil blends, namely groundnut oil:rice-bran oil and mustard oil:rice-bran oil, were prepared in different proportions and stored for a period of three years. Their physicochemical characteristics were determined. The results agreed with expected values except for free fatty acid percents and butyrorefrac-tometer readings, presumably due to rancidity. Fatty acid compositions of the blends were determined and ratios of characteristic fatty acids, like lignoceric to palmitic for groundnut oil:rice-bran oil blends, and erucic to palmitic for mustard oil:rice-bran oil blends, were calculated to identify individual oils in the blend.     

Study of needle penetration speeds on frictional properties of nonwoven webs: A new approach

H1 technology needlepunching machinery is one of the recent developments in the needleloom technology. H1 technology needlepunching nonwoven machinery has been effectively utilized to develop a set of nonwoven substrates at different punching rates. The effect of needlepunching speeds on the frictional properties of H1 technology polyester nonwoven webs is reported in this article. The frictional properties of nonwoven webs have been characterized using a simple normalized friction factor. In addition, the surfaces of the nonwoven substrates were scanned using scanning electron microscopy. The results show that for the three different penetration rates studied there seems to be a marginal difference in the frictional properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3626–3631, 2003