Zinc oxide-decorated multiwalled carbon nanotubes: a selective electrochemical sensor for the detection of Pb(II) ion in aqueous media

Journal of Materials Science: Materials in Electronics - Multiwalled carbon nanotubes, due to high conductivity, stability, and large specific surface area, have a potential ability to promote...     

CuxNi1-xO nanostructures and their nanocomposites with reduced graphene oxide: Synthesis,characterization, and photocatalytic applications

NiO nanostructure was synthesized using a simple co-precipitation method and was embedded on reduced graphene oxide surface via ultrasonication. Structural investigations were made through X-ray diffraction (XRD) and functional groups were confirmed by Fourier transform infrared spectroscopy (FTIR). XRD analysis revealed the grain size reduction with doping. Fourier transform infrared spectroscopy confirmed the presence of metal-oxygen bond in pristine and doped NiO nanostructure as well as the presence of carbon containing groups. Scanning electron microscopy (SEM) indicated that the particle size decreased when NiO nanostructure was doped with copper. BET surface area was found to increase almost up to 43 m²/g for Cu doped NiO nanostructure/rGO composite. Current-voltage measurements were performed using two probe method. UV–Visible spectroscopic profiles showed the blue and red shift for Cu doped NiO nanostructure and Cu doped NiO Nanostructure/rGO composite respectively. Rate constant for Cu doped NiO nanostructure/rGO composite found to increase 4.4 times than pristine NiO nanostructure.     

Review on zirconate-cerate-based electrolytes for proton-conducting solid oxide fuel cell

The performance of low-to-intermediate temperature (400–800?°C) solid oxide fuel cells (SOFCs) depends on the properties of electrolyte used. SOFC performance can be enhanced by replacing electrolyte materials from conventional oxide ion (O^2-) conductors with proton (H⁺) conductors because H⁺ conductors have higher ionic conductivity and theoretical electrical efficiency than O^2- conductors within the target temperature range. Electrolytes based on cerate and/or zirconate have been proposed as potential H⁺ conductors. Cerate-based electrolytes have the highest H⁺ conductivity, but they are chemically and thermally unstable during redox cycles, whereas zirconate-based electrolytes exhibit the opposite properties. Thus, tailoring the properties of cerate and/or zirconate electrolytes by doping with rare-earth metals has become a main concern for many researchers to further improve the ionic conductivity and stability of electrolytes. This article provides an overview on the properties of four types of cerate and/or zirconate electrolytes including cerate-based, zirconate-based, single-doped cerate–zirconate and hybrid-doped cerate–zirconate. The properties of the proton electrolytes such as ionic conductivity, chemical stability and sinterability are also systematically discussed. This review further provides a summary of the performance of SOFCs operated with cerate and/or zirconate proton conductors and the actual potential of these materials as alternative electrolytes for proton-conducting SOFC application.     

Stabilization of 6H-Hexagonal SrMnO3 Polymorph by Al2O3 insertion

We demonstrate the structural evolution of polymorphic phases in Al₂O₃-inserted SrMnO₃ ceramics synthesized by solid state reaction. While the 4H-hexagonal phase is predominant in pure SrMnO₃ ceramics, a small amount of 6H-hexagonal polymorph is identified in addition to the primary 4H-hexagonal SrMnO₃ and the secondary hexagonal SrAl₂O₄ phases in the as-sintered ceramics, evidenced by x-ray diffraction and subsequent Rietveld refinement analyses. The existence of the 6H-hexagonal SrMnO₃ phase is corroborated using Raman spectroscopy. The chemical compositions and electronic structures of the Al₂O₃-inserted SrMnO₃ compounds are also examined using energy dispersive spectroscopy and x-ray photoelectron spectroscopy, respectively. The first-principles calculations reveal that there is no clear difference between the total energies of 4H- and 6H-hexagonal polymorphs regardless of the presence/absence of Sr and oxygen vacancies. Possible origins are discussed with the estimation of actual strain based on the refined lattice parameter of 6H SrMnO₃.     

Fast determination of critical eluent composition for polymers by gradient chromatography

Gradient chromatography was applied in order to calculate the composition at elution for different methacrylates on normal phase columns. In addition the composition at elution was determined for polyethyleneoxide on a reverse phase column. It is shown that high molar mass polymers elute for a given homopolymer irrespective of their molar mass at the same eluent composition, which varies only slightly with gradient slope. In general the composition at elution in gradient chromatography is expected to be slightly lower than the true critical composition. For high molar mass polymers we found this composition to be close to the critical composition determined by isocratic experiments. The difference between the composition at elution and the true critical composition for a variety of polymethacrylates and for polyethyleneglycol was found to be only between 0.2 and 5%. Thus, after estimating the composition at elution, only a small number of additional isocratic experiments is needed to find the exact critical composition.     

PLATOP: a novel planarized trench isolation and field oxideformation using poly-silicon

A novel isolation scheme named planarized trench isolation and field oxide formation using poly-silicon (PLATOP) Is described. PLATOP is applicable to high-performance submicron VLSI since it results in encroachment-free shallow trenches, and planarized field oxide. The process offers poly silicon-filled deep trenches. The process also relies on noncritical lithography and novel etch processes to planarize the deposited poly-silicon from the top of the active areas, and oxidation to consume the poly-silicon in the field regions. Electrical results are presented proving the viability of the isolation scheme     

Material state remapping in computational solid mechanics

A computational procedure for remapping material state information from one finite element mesh to another is described. The procedure is useful in connection with evolving meshes for inelastic problems, as for example occur in the context of fracture simulation and adaptive mesh refinement. The proposed method is based on weak enforcement of equality between corresponding fields on the two meshes, where piecewise‐constant fields on both meshes are generalized from the quadrature‐point values. The essential algorithmic problem is that of calculating the volume partition of an arbitrary convex region with respect to a covering set of disjoint convex regions. Instead of geometrically resolving the associated intersections, the problem is herein approximated by a constrained optimization problem, which may be readily and efficiently solved computationally. This formulation is a main contribution of the paper. Computational examples are given that illustrate the effectiveness of the proposed procedure. Copyright © 2002 John Wiley & Sons, Ltd.     

Some pharmacologic and toxicologic studies on Rhazya stricta decne in rats, mice and rabbits

1. This work examines some in vivo and in vitro pharmacologic and toxicologic effects of extracts of Rhazya stricta, a medicinal plant in the United Arab Emirates. 2. R. stricta extracts at doses of 0.1-10 mg reduced the mean arterial blood pressure (MBP) of anesthetized rats in a dose-dependent manner. The depressor effect was partially sensitive to atropine (5 microM). Although the MBP was reduced by 50% by both doses of extracts, the normal electrocardiogram pattern and the heart rate remained unaltered. 3. Acute treatment of rats with the lyophilized extract at doses of 4 g/kg produced a significant rise in insulin concentration. In streptozotocin-diabetic rats loaded orally with glucose (1 g/kg), R. stricta at doses of 8 g/kg produced significant decreases in plasma glucose concentration at 0.5 and 1 h after treatment. 4. Chronic treatment of rats and mice for 28 days with the lyophilized extract of R. stricta did not affect the plasma glucose or insulin concentration or any of the hematological or biochemical indices measured. 5. The extracts of R. stricta (0.5-4 g/kg) dose-dependently decreased the gastrointestinal transit time in mice by 4-50%. 6. The butanolic extract of R. stricta (1 and 2 g/kg) significantly reduced the carrageenan-induced increase in raw paw edema 3 and 4 h after the extract administration. 7. The rectal temperatures of normothermic and pyrexic rats were reduced significantly 0.5 and 1 h after administration of butanolic R. stricta at doses of 1 and 2 g/kg. 8. The butanolic extract of R. stricta at doses of 1 and 2 g/kg significantly increased the reaction time on the hot plate 30 and 60 min after administration to rats. 9. At concentration < 0.05 mg/ml (bath concentration), lyophilized water and butanol extracts of R. stricta potentiated the twitch responses induced by indirect electrical stimulation in the rat phrenic nerve diaphragm preparation. The responses were inhibited by concentrations > 0.05 mg/ml. Neostigmine (2 x 10(-4)M) did not alter these effects of the extracts. 10. R. stricta extracts dose-dependently decreased the force of contraction and heart rate of the isolated rabbit heart. Atropine (1 x 10(-5)M) had no effect on the inhibitory activity of these extracts. The lyophilized water extract (> 10 mg) and butanol extract (> 5 mg) produced irreversible inhibition and disturbances in the force of contraction and heart rate.     

Synthesizing Energy-Efficient Embedded Systems with LOPOCOS

In this paper, we introduce the LOPOCOS (Low Power Co-synthesis) system, a prototype CAD tool for system level co-design. LOPOCOS targets the design of energy-efficient embedded systems implemented as heterogeneous distributed architectures. In particular, it is designed to solve the specific problems involved in architectures that include dynamic voltage scalable (DVS) processors. The aim of this paper is to demonstrate how LOPOCOS can support the system designer in identifying energy-efficient hardware/software implementations for the desired embedded systems. Hence, highlighting the necessary optimization steps during design space exploration for DVS enable architectures. The optimization steps carried out in LOPOCOS involve component allocation and task/communication mapping as well as scheduling and dynamic voltage scaling. LOPOCOS has the following key features, which contribute to this energy efficiency. During the voltage scaling valuable power profile information of task execution is taken into account, hence, the accuracy of the energy estimation is improved. A combined optimization for scheduling and communication mapping based on genetic algorithm, optimizes simultaneously execution order and communication mapping towards the utilization of the DVS processors and timing behaviour. Furthermore, a separation of task and communication mapping allows a more effective implementation of both task and communication mapping optimizationsteps. Extensive experiments are conducted to demonstrate the efficiency of LOPOCOS. We report up to 38% higher energy reductions compared to previous co-synthesis techniques for DVS systems. The investigations include a real-life example of an optical flow detection algorithm.     

Smart home security: challenges,issues and solutions at different IoT layers

The Journal of Supercomputing - The Internet of Things is a rapidly evolving technology in which interconnected computing devices and sensors share data over the network to decipher different...