The hot blow forming of AZ31 Mg sheet: Formability assessment and application development

The hot blow forming of magnesium sheet offers significant opportunity for forming complex, lightweight parts for automotive applications. This paper characterizes the elevated-temperature formability of AZ31 magnesium sheet materials and the effect of processing conditions on the performance of these materials. In addition, magnesium sheet application development at General Motors Corporation is reviewed.     

High yield formation of carbon nanotubes using a rotating cathode in open air

Carbon nanotubes (CNTs) have been synthesized using the arc discharge method with a rotating graphite disc as the cathode. Arcing was carried out in open air and without the use of catalysts. The current density was maintained constant through out the experiment, while, the rate of rotation of the cathode and atmosphere under which arcing was carried out were changed during experimentation. Characterization of the samples produced indicates that rotation of the cathode has a significant impact on the quality and yield of the process. It is proposed that rotation of the cathode drags plasma formed between two electrodes away from high temperature region. This results in a sudden quenching of the reactive plasma. The time available for nucleation and growth phenomena is significantly reduced and thus leads to the formation of highly graphitic multi walled CNTs (yield 60%) and traces of double walled CNTs.     

Lean philosophy: implementation in a forging company

This research addresses the implementation of lean philosophy in a forging company with a focus on radial forging production flow lines. Here, the prime motive is to evolve and test several strategies to eliminate waste on the shop floor. In this research, a systematic approach is suggested for the implementation of lean principles. This paper describes an application of value stream mapping (VSM). Consequently, the present and future states of value stream maps are constructed to improve the production process by identifying waste and its sources. Furthermore, Taguchi’s method of design of experiments is pursued here to minimize the forging defects produced due to imperfect operating conditions. A noticeable reduction in set-up time and work-in-process (WIP) inventory level is substantiated. Finally, we conclude with a discussion of managerial implications and the future scope of research.     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

The Hacking Tradition

This issue's works in progress department features a novel technology that embeds a six-degrees-of-freedom force-torque sensor into a physical artifact to transform existing 3D passive artifacts into contact-sensitive interface devices. The department also presents an approach for rewriting binary to better correlate application usage with contextual information.     

Refurbishment and safety upgradation of research reactor Cirus

Cirus, a 40 MW t, vertical tank type research reactor, having wide range of research facilities, was commissioned in the year 1960. This research reactor, situated at Mumbai, India has been operated and utilized extensively for isotope production, material testing and neutron beam research for nearly four decades. With a view to assess the residual life of the reactor, detailed ageing studies were carried out during the early 1990s. Based on these studies, refurbishment of Cirus for its life extension was taken up. During refurbishment, additional safety features were incorporated in various systems to qualify them for the current safety standards. This paper gives the details of the operating experiences, utilization of the reactor along with methodologies followed for carrying out detailed ageing studies, refurbishment and safety upgradation for its life extension.     

Recursive algorithms for implementing digital image filters

The B-spline functions are used to develop recursive algorithms for the efficient implementation of two-dimensional linear digital image filters. These filters may be spatially varying. The B-splines are used in a representation of the desired point spread function. We show that this leads to recursive algorithms and hardware implementations which are more efficient than either direct spatial domain filter realizations or FFT implementations. The Z-transform is used to develop a discrete version of Duhamel's theorem. A computer architecture for B-spline image filters is proposed and a complexity analysis and comparison to other approaches is provided.     

State of the academic field of IS in India

The field of information systems (IS) remains ill-defined, facing problems of recognition and identity crisis. Several papers and debates have been dedicated on this topic for over three decades. The focus of these debates have largely centered on the state of the IS field in Americas and Europe and with a limited study conducted in the Asia–Pacific context. This study attempts to assess the field in the Indian context and highlight the challenges and issues faced by IS faculties in India. Based on literature survey of the seminal papers in the field, we identified the salient topics of interest to IS researchers: identity of the IS field; diversity of the field; research approaches, methods and rigor; reference disciplines; journals and conferences; and IS course and curriculum. A two-phase study was carried out to explore the interest generated by the IS field in India. In the first phase, secondary data review of leading business schools in India was carried out to understand their focus on IS as an academic discipline. In the second phase, we conducted interviews of IS researchers from the premium business schools in India. In our study, we analyze the research focus of IS faculties in B-schools in India, analyze the composition of the faculty pool and the nature of research work undertaken by them. Our study points at the restricted focus of IS researchers in India around a few narrow areas, with a significant breadth of topics not being explored for research. We found the identity struggle of the field to be prominent, which was further compounded by the limited number of active, IS researchers. The growing importance of qualitative techniques in IS research, the challenges of developing a sound base in multiple reference disciplines and the need for making IS course interesting for business school students were some of the other significant observations. Our study also highlighted the paradox of the success of the IT industry in India leading to reduced enrollment of IS courses in B-Schools. We conclude by providing recommendations to B-school deans and directors.     

Multi-Objective Modified Particle Swarm Optimization for Test Suite Reduction (MOMPSO)

Software testing plays a pivotal role in entire software development lifecycle. It provides researchers with extensive opportunities to develop novel methods for the optimized and cost-effective test suite Although implementation of such a cost-effective test suite with regression testing is being under exploration still it contains lot of challenges and flaws while incorporating with any of the new regression testing algorithm due to irrelevant test cases in the test suite which are not required. These kinds of irrelevant test cases might create certain challenges such as code-coverage in the test suite, fault-tolerance, defects due to uncovered-statements and overall-performance at the time of execution. With this objective, the proposed a new Modified Particle Swarm optimization used for multi-objective test suite optimization. The experiment results involving six subject programs show that MOMPSO method can outer perform with respect to both reduction rate (90.78% to 100%) and failure detection rate (44.56% to 55.01%). Results proved MOMPSO outperformed the other stated algorithms.