Quadrature Mismatch Shaping for Digital-to-Analog Converters

Quadrature sigma-delta analog-to-digital converters require a feedback path for both the I and the Q parts of the complex feedback signal. If two separate multibit feedback digital-to-analog converters (DACs) are used, mismatch among the unit DAC elements leads to additional mismatch noise in the output spectrum as well as an I/Q imbalance. This paper proposes new quadrature bandpass (QBP) mismatch shaping techniques. In our approach, the I and Q DACs are merged into one complex DAC, which leads to near-perfect I/Q balance. To select the unit DAC elements of the complex multibit DAC, the well-known butterfly shuffler and tree structure are generalized towards a complex structure, and necessary constraints for their correct functioning are derived. Next, a very efficient first-order QBP shaper implementation is proposed. Finally, the newly presented complex structures are simulated to prove their effectiveness and are compared with each other with respect to performance     

Bax-induced cell death in Candida albicans

Bax is a pro-apoptotic member of the Bcl-2 family of proteins involved in the regulation of genetically programmed cell death in mammalian cells. It has been shown that heterologous expression of Bax in several yeast species, such as Saccharomyces cerevisiae, Schizosaccharomyces pombe and Pichia pastoris, also induces cell death. In this study we investigated the effects of Bax expression in the pathogenic yeast Candida albicans. Cell death inducing expression of Bax required a synthetic BAX gene that was codon-optimized for expression in Candida albicans. Expression of this BAX gene resulted in growth inhibition and cell death. By fusing Bax with the yeast enhanced green fluorescent protein of Aequoria victoria, the cell death-inducing effect of Bax was increased due to reduced proteolytic degradation of Bax. Using this fusion protein we showed that, upon expression in C. albicans, Bax co-localizes with the mitochondria. Furthermore, we showed for the first time that expression of Bax in yeast causes the mitochondria, which are normally distributed throughout the cell, to cluster in the perinuclear region.     

Hot drawing of partially miscible blends of polycarbonate and poly(butylene terephthalate)

Samples of PC-PBT blends over the entire composition range were drawn at 160°C to high extensions, 2.1–5.8, to study the mechanical reinforcement and the molecular structure development upon deformation. Elastic modulus E' increases with extension ratio for all compositions and temperatures. Blends with 25 and 40 wt% of PC show higher E' at low temperature than pure PBT blends do. Crystallinity increases with extension ratio and is relatively smaller with increasing PC content. The influence of the reversible α to β crystal form transformation was also studied. The second moment of the orientation function f for both crystal forms increases to high values > 0.9 at relatively low extensions. f decreases with PC content for α crystals but decreases for β crystals. The α fraction is high for PBT and decreases with PC content and extension ratio in the blends. Strain recovery experiments show that the α to β transformation is also elastic in nature at high extension ratios and that the reinforcing effect in high PBT content blends is not due to the α/β ratio. © 1996 John Wiley & Sons, Inc.     

Improved design method for continuous-time quadrature bandpass /spl Sigma//spl Delta/ ADCs

In continuous-time quadrature bandpass /spl Sigma//spl Delta/ ADCs it is desirable to limit the number of cross-couplings. This can be achieved by implementing the loop as a cascade of complex integrators with only real coefficients. It is shown that this may result in a very poor approximation of the desired noise transfer function, because the effect of the DAC pulse is not taken into account correctly. A simple implementation that solves this problem is proposed.     

A one-path subsampling quadrature receiver based on a ΣΔ modulator with distributed resonators

This article presents experimental results of a quadrature bandpass sigma–delta (ΣΔ) modulator based on distributed resonators. The modulator employs transmission lines and transconductors as main components and does not require switches in the loop filter as in the case of switched-capacitor (discrete-time) filters. In addition, the proposed complex modulator does not require a quadrature mixer in the receiver. As main feature, the modulator architecture introduces an innovative way to produce the I and Q outputs that is immune to path mismatch due to the sharing of all the analog circuitry for both paths. The one-bit second-order modulator ADC is able to convert IF signals at fs/2 and 3fs/2 (fs = 50 MHz), achieving an ENOB = 10 bits within a 1 MHz signal bandwidth. Therefore the modulator may be feasible for the typical IF frequencies used in cellular base stations. Furthermore, it provides an image rejection grater than 70 dB. The 0.35 μm BiCMOS chip consumes 28 mW at 3.3 V supply voltage.     

Dose reconstruction using mobile phones

Electronic components inside mobile phones are regarded as useful tools for accident and retrospective dosimetry using optically stimulated luminescence (OSL) and thermoluminescence. Components inside the devices with suitable properties for luminescence dosimetry include, amongst others, ceramic substrates in resistors, capacitors, transistors and antenna switches. Checking the performance of such devices in dosimetric experiments is a crucial step towards developing a reliable dosimetry system for emergency situations using personal belongings. Here, the results of dose assessment experiments using irradiated mobile phones are reported. It will be shown that simple regenerative dose estimates, derived from various types of components removed from different mobile phone models, are consistent with the given dose, after applying an average fading correction factor.     

Definitive injuries to the teeth. Lesions of hard tissue and pulp

Tooth infraction and enamel fracture are the most simple traumatic crown lesions. When necessary the lesions can be covered with composite material. Follow-up of the traumatized tooth is necessary since pulp necrosis and obliteration can develop. In case of an uncomplicated fracture involving enamel and dentine immediate protection of the dentinal wound is important for the preservation of tooth vitality. In case of a negative vitality test, an endodontic treatment will be performed in case of a tooth with open apex only when supplemental clinical and or radiological signs of pulp necrosis are present. When a complicated enamel-dentine fracture is present, an endodontic treatment will be performed when root formation is complete. In case of a wide open apex, a pulp capping, partial pulpotomy or cervical pulpotomy will be performed in order to preserve vitality of pulpal tissues at the level of the root. Crown root fractures can be superficial, deep or vertical. In case of a superficial localisation of the fracture line, restoration with composite material or with the fractured tooth segment is indicated. Deep crown-root fractures can only be restored when the fracture line is localized not deeper than at 1/3 of the length of the root. In case of a vertical fracture, extraction is the only possibility. Root fractures on immature teeth are in most cases unilateral and have a good prognosis. In teeth with completed root formation, fractures at the level of the cervix have a poor prognosis. The fractured segment will be removed. Only when the remaining root segment is long enough, this part can be maintained. In case of a fracture at the mid-root level, repositioning and rigid splinting for a period of 8 weeks is necessary. When the tooth becomes non-vital, endodontic treatment is performed on the coronal part. Root fracture in the apical part does not necessary result in enhanced tooth mobility and immobilisation is not always necessary. Healing of a root fracture is only possible when the tooth is immobilized for a sufficiently long period. Regular control of tooth vitality is necessary since pulp necrosis can lead to an inflammatory reaction at the level of the fracture line.     

Displacement enzyme linked aptamer assay

Immense effort has been placed on the realization of immunoassays exploiting displacement of a suboptimum target, due to the ease of use and applicability to immunochromatographic strips and immunosensors. Most of the efforts reported to date focus on the use of a suboptimal target that is displaceable by the target toward which the antibody has higher affinity. Limited success has been achieved due to difficulty in obtaining suboptimal targets to which the antibody has enough affinity to bind while at the same time having lower levels of affinity in comparison to the target to facilitate displacement. Aptamers are synthetic oligonucleotides specifically selected to bind a certain target. Thanks to their high affinity and sensitivity, aptamers appear as alternative candidates to antibodies for analytical devices and several enzyme-linked aptamer assays and aptasensors have been reported. Aptamers, in contrast to antibodies, require the formation of a three-dimensional structure for target binding and can thus be anticipated to have a much higher affinity for binding its target rather than a modified form of the target (e.g., enzyme-labeled target). This phenomenon can be exploited for the development of a displacement assay, using enzyme-labeled target as a suboptimal displaceable molecule. Here, we report the first demonstration of the exploitation of an aptamer in an extremely rapid and highly sensitive displacement assay. Surface plasmon resonance studies demonstrated the thrombin-binding aptamer to have a lower affinity for enzyme-labeled thrombin than unmodified thrombin, with respective K(D) of 1.1 x 10(-8) and 2.9 x 10(-9) M. The assay is extremely rapid, requiring only 10 min for completion, and exhibits a detection limit lower than that obtainable with competitive enzyme-linked aptamer assays and comparable to that of hybrid aptamer-antibody assays. Optimal storage conditions for precoated microtiter plates (consisting of coated aptamer and captured labeled target) were elucidated, and the results demonstrated their amenability to long-term storage, facilitating commercially viable displacement enzyme-linked aptamer assays that simply require sample addition, with a total assay time, including color development, of 30 min.     

Engineering camel single-domain antibodies and immobilization chemistry for human prostate-specific antigen sensing

The specificity and affinity characteristics of antibodies make them excellent probes in biosensor applications. Unfortunately, their large size, unstable behavior, and random immobilization properties create numerous problems. The single-domain antigen-binding fragment derived from heavy-chain antibodies of camelids (termed VHH) offers special advantages in terms of size, stability, and ease of generating different antibody constructs. In this study, we show the potential of those VHHs in sensing human prostate-specific antigen (hPSA) by SPR technology. Different VHH constructs were immobilized onto commercial and custom-built sensor surfaces by metal chelation, biotin-streptavidin interaction, or covalent coupling. The detection of subnanogram per milliliter hPSA concentrations could be attained on a covalently coupled three-dimensional dextran surface. Moreover, the ratio of different hPSA isoform concentrations could be assessed via a sandwich assay and resulted in the detection of clinically significant antigen concentrations within 15 min. In addition, for the first time, the intrinsic protein stability is presented as an important probe design factor, since our results reveal that higher intrinsic stability offers higher resistance to harsh regeneration conditions. In conclusion, we present VHHs as a novel class of biosensor probes rivaling conventional antibodies and their derived antibody fragments.