Convective drying of wood-waste in air and superheated steam

The convective batch drying of Western Hemlock hog fuel-sized particles in fixed beds under various operating conditions quantiatively established the effect of factors which govern the drying process. A correlation was obtained for the Nusselt number during the heat transfer controlled period. Under specific conditions, the existence of a unified characteristic drying rate curve was confirmed. Drying behaviour as described by the receding plane model provided a mathematical expression for such a curve. The existence of an inversion point temperature was experimentally confirmed.     

Parametric study on smoothed particle hydrodynamics for accurate determination of drag coefficient for a circular cylinder

Simulations of two-dimensional (2D) flow past a circular cylinder with the smoothed particle hydrodynamics (SPH) method were conducted in order to accurately determine the drag coefficient. The fluid was modeled as a viscous liquid with weak compressibility. Boundary conditions, such as a no-slip solid wall, inflow and outflow, and periodic boundaries, were employed to resemble the physical problem. A sensitivity analysis, which has been rarely addressed in previous studies, was conducted on several SPH parameters. Hence, the effects of distinct parameters, such as the kernel choices and the domain dimensions, were investigated with the goal of obtaining highly accurate results. A range of Reynolds numbers (1–500) was simulated, and the results were compared with existing experimental data. It was observed that the domain dimensions and the resolution of SPH particles, in comparison to the obstacle size, affected the obtained drag coefficient significantly. Other parameters, such as the background pressure, influenced the transient condition, but did not influence the steady state at which the drag coefficient was determined.     

Controller synthesis with guaranteed closed-loop phase constraints

In this paper, we present an analysis and synthesis approach for guaranteeing that the phase of a single-input, single-output closed-loop transfer function is contained in the interval [−α,α] for a given α>0 at all frequencies. Specifically, we first derive a sufficient condition involving a frequency domain inequality for guaranteeing a given phase constraint. Next, we use the Kalman–Yakubovich–Popov theorem to derive an equivalent time domain condition. In the case where , we show that frequency and time domain sufficient conditions specialize to the positivity theorem. Furthermore, using linear matrix inequalities, we develop a controller synthesis approach for guaranteeing a phase constraint on the closed-loop transfer function. Finally, we extend this synthesis approach to address mixed gain and phase constraints on the closed-loop transfer function.     

He’s homotopy perturbation method: A strongly promising method for solving non-linear systems of the mixed Volterra–Fredholm integral equations

In this paper, He’s homotopy perturbation method is applied to solve non-linear systems of mixed Volterra–Fredholm integral equations. Two examples are presented to illustrate the ability of the method. Also comparisons are made between the Adomian decomposition method and the homotopy perturbation method. The results reveal that He’s homotopy perturbation method is very effective and simple and in these examples leads to the exact solutions.     

Optimal motion planning for parallel robots via convex optimization and receding horizon

In this paper, the problem of motion planning for parallel robots in the presence of static and dynamic obstacles has been investigated. The proposed algorithm can be regarded as a synergy of convex optimization with discrete optimization and receding horizon. This algorithm has several advantages, including absence of trapping in local optimums and a high computational speed. This problem has been fully analyzed for two three-DOF parallel robots, ie 3s-RPR parallel mechanism and the so-called Tripteron, while the shortest path is selected as the objective function. It should be noted that the first case study is a parallel mechanism with complex singularity loci expression from a convex optimization problem standpoint, while the second case is a parallel manipulator for which each limb has two links, an issue which increases the complexity of the optimization problem. Since some of the constraints are non-convex, two approaches are introduced in order to convexify them: (1) A McCormick-based relaxation merged with a branch-and-prune algorithm to prevent it from becoming too loose and (2) a first-order approximation which linearizes the non-convex quadratic constraints. The computational time for the approaches presented in this paper is considerably low, which will pave the way for online applications.     

Single crystal silicon nanopillars, nanoneedles and nanoblades with precise positioning for massively parallel nanoscale device integration

Arrays of precisely positioned single crystal silicon nanopillars, nanoneedles, and nanoblades with minimum feature sizes as small as 30 nm are fabricated using entirely scalable top-down fabrication techniques. Using the same scalable technologies, devices consisting of electrically connected silicon nanopillars with multiple addressable electrodes for each nanostructure are realized. The arrays of nanopillars, nanoneedles, and nanoblades are shown to exhibit Raman signal enhancement on 1,2-benzenedithiol monolayers, opening a path to nanodevices that manipulate, position, detect and analyze molecules.     

Adhesive surface interactions of cellulose nanocrystals from different sources

Adhesion plays an important role in the final properties of nanocomposites. This study explored the surface interaction of cellulose nanocrystals (CNCs) and the effect of CNC sources on adhesion between individual CNCs and the Si tip of an AFM cantilever using a force mapping technique called FMap. The adhesion between CNCs and a Si tip from five different sources has been studied: cotton, Whatman filter paper, hemp, softwood chemical kraft pulp, and softwood-dissolving pulp (alistaple). Mica was used as the background substrate to act as an internal standard. This study’s findings suggest that adhesion is not the same for all CNCs. Transmission electron microscopy and atomic force microscopy were used to determine the size and shape of each CNC. The experimental quantitative data showed that adhesion between CNCs and the Si tip has a close correlation with the diameter of the CNCs. X-ray photoelectron spectroscopy confirmed the presence of sulfate groups on the surface of the CNCs and a correlation between adhesion and surface chemistry of the CNCs was observed.     

Plasticized poly(vinyl chloride) composites: Influence of different nanofillers as antimigration agents

In this study, plasticized poly(vinyl chloride) (PVC) composites with different nanofillers, including single‐walled carbon nanotubes (SWCNTs), organoclay, TiO₂, and ZnO nanoparticles, were prepared, and their effects on plasticizer migration were investigated. Scanning electron micrographs revealed the dispersion quality of the nanofillers in the polymer matrix. It had a significant influence on the performance of the nanofillers in the process of plasticizer migration. Migration and exudation tests showed that the nanofillers could efficiently hinder plasticizer migration. On the basis of these results, we concluded that carbon nanotubes were the best antimigration agent in the plasticized system. This was ascribed to the high aspect ratio of the SWCNTs and the good interactions between them and the plasticizer. Also, TiO₂ nanoparticles showed a better performance compared to the ZnO nanoparticles. This was due to the more homogeneous dispersion of the TiO₂ in the polymer matrix and the higher surface area of the particles. The differential scanning calorimetry thermograms were in good agreement with the migration tests. The lowest change in the glass‐transition temperature was observed for the composite filled with SWCNTs. This indicated that a lower amount of the plasticizer migrated from PVC. The thermogravimetric analysis curves showed that the incorporation of the nanofillers improved the thermal stability of the PVC. The results could be useful for determining the efficiency of plasticized PVC in applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42559.     

Immobilization of palladium on benzimidazole functionalized mesoporous silica nanoparticles: catalytic efficacy in Suzuki–Miyaura reaction and nitroarenes reduction

Journal of Porous Materials - Benzimidazole functionalized mesoporous silica nanoparticles immobilized Pd(0)/Pd(II) has been proposed as an efficient catalyst for the one-pot preparation of biaryls...     

Direct synthesis of bi-modal porous structure MCM-41 and its application in CO2 capturing through amine-grafting

A bi-modal porous structure MCM-41 (BPS-MCM-41) was synthesized and functionalized by 3-[2-(2-Aminoethylamino)ethylamino]propyltrimethoxysilane (TRI); also, its performance in amine grafting and CO₂ capturing was compared with that of pore-expanded MCM-41 [1]. To create larger pores beside the mesoporous structure of MCM-41, carbon black nanoparticles were used as the solid template. Characterizing the BPS-MCM-41 using the BET and BJH techniques resulted in the surface reduction of 29.3 percent and volume increase of 68.46 percent. The pore size distribution showed two peaks: a narrow peak at 2.24 nm diameter, which belonged to micelles, and a wide one at about 50 nm due to the presence of used nanoparticles. The functionalization confirmed that BPS-MCM-41 is capable of accommodating a large quantity of amine groups. The CO₂ adsorption measurement indicated that internal volume of the adsorbent was a critical factor affecting the adsorption capacity of the amine grafted adsorbents.