Interferometer for cold neutrons

Design and setup of an interferometer for cold and ultracold neutrons are described. As neutron optical components three holographically produced gratings are arranged in triple Laue geometry. The gratings are adjusted during their recording process in photosensitized polymer slabs once for ever. Employing this device we measured the coherence function of a cold neutron beam by means of interferometry.     

Assessing heating and cooling demands of closed greenhouse systems in a cold climate

Reducing greenhouse gas emissions by providing non‐fossil fuel energy sources is imminently necessary. The area of particular interest in this paper is the agricultural greenhouse industry. In these structures, significant heating demands are present, especially in cold climates, and are typically met by combusting fossil fuels. In an effort towards a sustainable energy supply, the potential of closed greenhouse systems in a cold climate is explored. In these systems, natural ventilation for cooling and dehumidification is replaced with active systems, and the thermal energy removed can be re‐used, reducing the overall heating demand. A transient greenhouse model is created using TRNSYS software and validated with natural gas usage data from a reference greenhouse. The annual heating and cooling demands, effect of varying cover materials and potential for heat recovery ventilation are explored for the most concentrated greenhouse areas in Canada. Copyright © 2017 John Wiley & Sons, Ltd.     

Effects of osteoporosis on AIS 3+ injury risk in motor-vehicle crashes

Older occupants in motor-vehicle crashes are more likely to experience injury than younger occupants. One possible reason for this is that increasing age is associated with increased prevalence of osteoporosis, which decreases bone strength.Crash-injury data were used with Bayes’ Theorem to estimate the conditional probability of AIS 3+ skeletal injury given that an occupant is osteoporotic for the injury to the head, spine, thorax, lower extremities, and upper extremities. This requires the conditional probabilities of osteoporosis given AIS 3+ injury for each of the body regions, which were determined from analysis of the Crash Injury Research and Engineering Network database. It also requires information on probability of osteoporosis in the crash-involved population and the probabilities of AIS 3+ skeletal injury to different body regions in crashes. The latter probabilities were obtained from the National Automotive Sampling System-Crashworthiness Data System (NASS-CDS) database. The former was obtained by modeling the probability of osteoporosis in the US populations using data from the 2006 National Health Examination Nutrition Survey and applying this model to the estimate of the crash-involved population in NASS-CDS. To attempt to account for the effects of age on injury outcome that are independent of osteoporosis, only data from occupants who were 60 years of age or older were used in all analyses.Results indicate that the only body region that experiences a statistically significant change in fracture injury risk with osteoporosis is the spine, for which osteoporosis increases the risk of AIS 3+ fracture by 3.28 times, or from 0.41% to 1.34% (p < 0.0001). This finding suggests that the increase in AIS 3+ injury risk with age for non-spine injuries is likely influenced by factors other than osteoporosis.     

Wet-etching of precipitation-based thin film microstructures for micro-solid oxide fuel cells

In micro-solid oxide fuel cells (μ-SOFCs) ceramic thin films are integrated as free-standing membranes on micromachinable substrates such as silicon or Foturan^® glass ceramic wafers. The processing of μ-SOFCs involves unavoidable dry- or wet-chemical etching for opening the substrate below the free-standing fuel cell membranes. In the first part of this paper current dry- and wet-chemical etchants for structuring of ceria-based electrolyte materials are reviewed, and compared to the etch-rates of common μ-SOFCs substrates. Wet-chemical etchants such as hydrofluoric acid are of high interest in μ-SOFC processing since they allow for homogeneous etching of ceria-based electrolyte thin films contrary to common dry-etching methods. In addition, HF acid is the only choice for substrate etching of μ-SOFC based on Foturan^® glass ceramic wafers. Etching of Ce_0.8Gd_0.2O_1.9?x spray pyrolysis electrolyte thin films with 10% HF:H₂O is investigated. The etch-resistance and microstructures of these films show a strong dependency on post deposition annealing, i.e. degree of crystallinity, and damage for low acid exposure times. Their ability to act as a potential etch-resistance for μ-SOFC membranes is broadly discussed. Guidance for thermal annealing and etching of Ce_0.8Gd_0.2O_1.9?x thin films for the fabrication of Foturan^®-based μ-SOFCs is given.     

Requirements and psychology

Fulfilling your customers' interests determines your market success, but how do you find these requirements effectively and efficiently? As simple as this question sounds, answering it in daily practice is difficult. Often, stakeholders are interviewed about their requirements or asked to write them down, but this approach rarely uncovers the real requirements that reflect a customer's true interests or needs. We need a way of getting information about the customers' core desires-conscious, unconscious, even subconscious. The hottest sellers are products that fulfill these desires. The author borrows some ideas from neurolinguistic programming which belongs to the field of psychotherapy and discusses the Requirements Engineering (RE)-Metamodel