Lack of carcinogenicity of medium-viscosity liquid paraffin given in the diet to F344 rats

The carcinogenicity of medium-viscosity liquid paraffin was examined in Fischer 344 rats. Groups of 50 males and 50 females were given the material at dietary doses of 0 (control), 2.5 or 5% for 104 wk. Slight increases in food consumption and body weight were observed in both sexes of the 5% group. However, no significant differences between the control and treated groups were noted with regard to clinical signs, mortality and haematology findings. A variety of tumours developed in all groups, including the control group, but all the neoplastic lesions were histologically similar to those known to occur spontaneously in F344 rats, and no statistically significant increase in the incidence of any tumour type was found for either sex in the treated groups. Granulomatous inflammation in the mesenteric lymph nodes, considered to be a reaction to paraffin absorption, was observed with similar incidence and severity in both sexes of the 2.5 and 5% groups. Thus, it is concluded that under the present experimental conditions, the high dose, about 2000-200,000 times higher than the current temporary acceptable daily intake, does not have any carcinogenic potential in F344 rats. Furthermore, granulomatous inflammation observed in mesenteric lymph nodes were not associated with any development of neoplastic lesions.     

A novel tungsten light-shield structure for high-density CCD imagesensors

A novel tungsten light-shield structure has been developed. Tungsten film properties, the device configuration with the tungsten light-shield structure, and experimentally achieved results regarding device characteristics are described. Optical measurement clarified that tungsten film has a sufficiently low transmittance value for practical use for more than 200-nm-thick film and is stable up to 1000°C. The good step coverage and low reflectance, such as 20-40% for aluminum, required for light-shield film were also obtained. A tungsten light-shield structure was applied to a 1/2-in format 668(H)-pixel×575(V)-pixel charge coupled-device (CCD) image sensor. An extremely low smear value, less than 0.001%, was obtained for a 300-nm film thickness     

Melatonin inhibits naloxone-induced luteinizing hormone release in ovariectomized estrogen-primed rats

The present study aimed to examine the effect of melatonin on naloxone-induced luteinizing hormone (LH) secretion in ovariectomized estrogen-primed rats. A single intracerebroventricular (i.c.v.) injection of naloxone (mu opioid receptor blocker, 15 micrograms) or an intravenous (i.v.) injection of LH-releasing hormone (LHRH, 50 ng/kg) elicited a transient and significant increase in the serum LH concentration within 10 min. While an i.c.v. injection of 100 ng melatonin by itself did not change the basal LH release, it almost completely inhibited the naloxone-induced LH release. Melatonin (10 ng) also significantly reduced the effect of naloxone. However, an i.c.v. injection of 100 ng melatonin did not affect the LHRH-induced LH release. In separate experiments, the effect of melatonin on naloxone-induced pulsatile LH secretion was studied in estrogen-treated rats. A continuous i.v. infusion of naloxone (20 mg/kg/h) induced LH pulses in rats treated i.c.v. with saline. An i.c.v. administration of 100 ng melatonin, which by itself did not affect basal LH secretion, significantly reduced the frequency, but not the amplitude, of LH pulses induced by the naloxone infusion. These results show that melatonin has a suprapituitary site of action to inhibit naloxone-induced LH release, and suggest that melatonin has an effect in inhibiting the activity of the hypothalamic LHRH pulse generator, either directly or indirectly, in female rats.     

Synthesis of polyethylene oxide end‐capped with perfluoroalkyl groups/polystyrene prototype brushes

Polystyrene (PS)/poly(ethylene oxide) (PEO) prototype brushes were prepared by alternating free‐radical copolymerization of methacryloyl‐terminated PS and α‐vinylbenzyl‐ω‐hydroxy or α‐vinylbenzyl‐ω‐perfluoroalkyl (R_f) PEO macromonomers with the addition of Lewis acid (SnCl₄). It was found from their dilute‐solution properties that PS/PEO end‐capped with R_f (PBR_f), and PS/PEO having OH groups at terminal ends (PBOH) prototype brushes formed a single molecule in benzene and aggregates in chloroform, respectively. However, the brush PBOH formed a single molecule in N,N‐dimethylformamide. Such aggregation behaviors seemed to be caused by the interaction between hydroxy groups of PEO chain ends. The brush PBOH was also converted into PBR_f‐type brush by chemical modification, using corresponding acid chloride. The substitution of R_f groups was ～70% due to slipping of terminal hydroxy groups into PEO internal domains. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 772–778, 2006     

Co‐injection molding of PVC with other thermoplastics: Processing,properties, and applications

Rigid poly(vinyl chloride) (PVC) was co‐injected with glass‐fiber‐reinforced PVC (GFR‐PVC), polypropylene (PP), acrylonitrile‐butadiene‐styrene copolymer (ABS), and polycarbonate (PC) by using the Mono‐sandwich co‐injection process. Up to three through‐thickness skin‐core morphologies were observed along the length of the sample. Near the gate, the core was always a single, continuous layer. In some cases, the core diverged into multiple or discontinuous layers. Farther from the gate, flow of the core ceased, leaving a skin‐only region. The skin and core layers were more uniformly distributed through the test plaque when injection speed was low. Adhesion between PVC and PP was poor. Skin and core layers delaminated, and mechanical properties were poor. The PVC adhered well to GFR‐PVC, ABS, and PC. No layer delamination occurred, and mechanical properties were intermediate between those of the skin and core components alone. Dropped dart impact energy was controlled more by the skin layer than the core. In rigid PVC/GFR‐PVC co‐injected samples, impact energy was 2.5 times greater when GFR‐PVC was the core than when GFR‐PVC was the skin.     

Evolution of patinas on copper exposed in a suburban area

Copper plates were exposed under sheltered outdoor conditions for up to one year, starting in September 2001 in Musashino City, Tokyo, a suburban area. Following various periods of exposure, the patinas on the plates were characterized to investigate their evolution by using X-ray fluorescence analysis, X-ray diffraction, field emission scanning electron microscopy, and glow discharge optical emission spectroscopy. The difference in the roles of sulfur and chlorine in the early stages of copper patination were identified by analyzing the depth profiles of these two elements. Sulfur was found on top of the patina as cupric sulfates such as posnjakite (Cu₄SO₄(OH)₆ · H₂O) or brochantite (Cu₄SO₄(OH)₆). Brochantite appeared only after 12 months of exposure. In contrast, chlorine was found on the surface after only one month of exposure. It gradually penetrated the patina as the exposure period lengthened, forming copper chloride complexes. Chloride ions accumulated at the patina/copper interface, forming nantokite (CuCl), which promoted corrosion.     

A new optical elasticity resin for mobile LCD modules

Abstract— The display used in current cell phones has an air gap between the cover glass and the liquid‐crystal‐display (LCD) module to prevent the LCD glass from being damaged. Reflections at the boundaries of the air gap cause a reduction in the LCD luminance and contrast. To address this problem, a newly proposed LCD structure has been investigated. The “Super View Resin (SVR),” a transparent elastic resin which improves the shock resistance and visibility of the LCD, has been developed. Filling the air gap between the cover glass and LCD module with a refractive‐index‐matching resin solves the light‐reflection problem inherent in the use of a reinforced cover‐glass lens. Moreover, the elastic filler works as a damper, reducing any external shock, which prevents not only the cover glass and LCD module from being damaged, but also the glass from being shattered when it is broken.     

Factors associated with serum magnesium and vascular stiffness in maintenance hemodialysis patients

Introduction : We evaluated the associated factors of serum magnesium in patients on maintenance hemodialysis (MHD). Furthermore, we evaluated the relationship between low serum magnesium and arteriosclerosis in these patients. Methods : In 129 patients on MHD, we evaluated the blood levels of magnesium, brachial‐ankle pulse wave velocity (ba‐PWV), ankle‐brachial index (ABI), and intima‐media thickness of the common carotid artery (IMT). Findings : In MHD patients, the serum level of magnesium was significantly correlated with age, calcium, TNF‐α, albumin, and ba‐PWV but not with ABI or IMT. In the multiple regression analysis, albumin (P = 0.0001, β = 0.31) and calcium (P = 0.029, β = 0.18) were selected as significant predictors of the magnesium level in MHD patients. Furthermore, the serum level of magnesium, as well as systolic blood pressure (P = 0.0001, β = 0.32) and age (P = 0.005, β = 0.25), were selected as significant (P = 0.012, β = ?0.22) predictors of ba‐PWV in MHD patients. Discussion : In MHD patients, the serum magnesium level was associated with the serum levels of calcium and albumin. Furthermore, a low serum magnesium level in MHD patients was associated with the index of vascular stiffness.     

Highly efficient wideband continuum generation in a single-mode optical fiber by powerful broadband laser pumping

By pumping a single-mode optical fiber with a powerful broadband nonselective dye laser, we obtain a high-efficiency wideband continuum (530-930 nm) with nonlinear conversion efficiency exceeding 90%. Experimental conditions for a coherent regime of broadband stimulated Raman scattering are created, which in combination with the broadband self-phase modulation and the four-photon parametric processes leads to a spectral broadening and to the continuum formation. The influence of the pump laser spectral linewidth on the nonlinear conversion efficiency is analyzed and investigated by comparative experiments at narrow-band and broadband laser excitations.