Performance assessment of gas crossover phenomenon and water transport mechanism in high pressure PEM electrolyzer

To improve proton exchange membrane (PEM) electrolyzes’ performance the voltage loss through them should be avoided. In this work, it is intended to analyze losses including of diffusion loss, ohmic loss due to electrode, bipolar plate (BP), and membrane resistances, and gas crossover associated with the water transferring mechanisms. All of the losses are associated with water transferring mechanisms, which is created due to electro-osmoic drag, pressure differential between the anode and cathode sides, and diffusion. Furthermore, the effect of membrane thickness, cathode pressure, and operating temperature on the hydrogen crossover is examined. In addition, the contribution of ohmic loss due to electrode bipolar plate (BP), and membrane resistances is studied and, the contribution of different losses on the cell performance is discussed. Results show that raising cathode pressure from 1 to 40 bar lead to the increment of anodic hydrogen content from 1.038% to 21% at the specific current density of 10,000 A/m2. Enhancing the thickness of membrane has considerable impact on decrementing anodic hydrogen content, but the mass transfer loss rises from 0.022 to 0.027 V with enhancing membrane thickness from 50 to 300 μm, respectively. Furthermore, the contribution of voltage losses, assigned to each of losses are equal to 85%, 3%, and 12% for activation, diffusion and ohmic losses, respectively. It is found that, from the reported contribution for ohmic loss, the contribution of electrode BP, and membrane resistances are 31% and 69%, respectively.     

Vibration of circular plate with multiple eccentric circular perforations by the Rayleigh-Ritz method

The free vibration of a circular plate with multiple perforations is analyzed by using the Rayleigh-Ritz method. Admissible functions are assumed to be separable functions of radial and tangential coordinates. Trigonometric functions are assumed in the circumferential direction. The radial shape functions are the boundary characteristic orthogonal polynomials generated following the Gram-Schmidt recurrence scheme. The assumed functions are used to estimate the kinetic and the potential energies of the plate depending on the number and the position of the perforations. The eigenvalues, representing the dimensionless natural frequencies, are compared with the results obtained using Bessel functions, where the exact solution is available. Moreover, the eigenvectors, which are the unknown coefficients of the Rayleigh-Ritz method, are used to present the mode shapes of the plate. To validate the analytical results of the plates with multiple perforations, experimental investigations are also performed. Two unique case studies that are not addressed in the existing literature are considered. The results of the Rayleigh-Ritz method are found to be in good agreement with those from the experiments. Although the method presented can be employed in the vibration analysis of plates with different boundary conditions and shapes of the perforations, circular perforations that are free on the edges are studied in this paper. The results are presented in terms of dimensionless frequencies and mode shapes.     

In vivo study of anti‐epidermal growth factor receptor antibody‐based iron oxide nanoparticles (anti‐EGFR‐SPIONs) as a novel MR imaging contrast agent for lung cancer (LLC1) cells detection

Superparamagnetic iron oxide nanoparticles (SPIONs) conjugated with anti‐epidermal growth factor receptor monoclonal antibody (anti‐EGFR‐SPIONs) were characterised, and its cytotoxicity effects, ex vivo and in vivo studies on Lewis lung carcinoma (LLC1) cells in C57BL/6 mice were investigated. The broadband at 679.96 cm⁻¹ relates to Fe–O, which verified the formation of the anti‐EGFR‐Mab with SPIONs was obtained by the FTIR. The TEM images showed spherical shape 20 and 80 nm‐sized for nanoparticles and the anti‐EGFR‐SPIONs, respectively. Results of cell viability at 24 h after incubation with different concentrations of nanoprobe showed it has only a 20% reduction in cell viabilities. The synthesised nanoprobe administered by systemic injection into C57BL/6 mice showed good Fe tumour uptake and satisfied image signal intensity under ex vivo and in vivo conditions. A higher concentration of nanoprobe was achieved compared to non‐specific and control, indicating selective delivery of nanoprobe to the tumour. It is concluded that the anti‐EGFR‐SPIONs was found to be as an MR imaging contrast nanoagent for lung cancer (LLC1) cells detection.Inspec keywords: toxicology, biomedical MRI, lung, magnetic particles, biomedical materials, nanofabrication, nanomagnetics, transmission electron microscopy, nanomedicine, superparamagnetism, nanoparticles, iron compounds, proteins, cellular biophysics, molecular biophysics, cancer, tumours, Fourier transform infrared spectraOther keywords: MR imaging contrast agent, LLC1, superparamagnetic iron oxide nanoparticles, Lewis lung carcinoma cells, ex vivo conditions, cell viability, antiepidermal growth factor receptor antibody‐based iron oxide nanoparticles, antiEGFR‐SPION, lung cancer cell detection, antiepidermal growth factor receptor monoclonal antibody, cytotoxicity effects, C57BL‐6 mice, antiEGFR‐Mab, FTIR spectra, TEM, spherical shape, incubation, nanoprobe concentrations, systemic injection, Fe tumour uptake, image signal intensity, in vivo conditions, time 24.0 hour, Fe₃ O₄      

High performance high-purity sol-gel derived carbon supercapacitors from renewable sources

In this study highly pure carbons synthesized using resorcinol furaldehyde catalyzed with hexamethylenetetramine (an amine base) are tested for supercapacitor electrodes. This synthesis is not only from all-organic renewable sources, but can also significantly increase the performance of the device by promoting adequate electric double layer formation. The electrochemical characterization shows an increase in the specific capacitance per unit of surface area that is 18% higher than that of commercial biomass carbons and their synthetic counterparts. The life of the capacitor is also extended to twice that of the commercial brand tested here and has increased power after cycling. The supercapacitors made from this synthesis have electric double layer characteristics as desired in some applications. The samples have been tested for composition using XPS, and their electrochemical performance was analyzed using galvanostatic measurements and complex capacitance and power derived from impedance spectroscopy.     

Organic Thin Film Transistors with Polymer Brush Gate Dielectrics Synthesized by Atom Transfer Radical Polymerization

Low operating voltage is an important requirement that must be met for industrial adoption of organic field‐effect transistors (OFETs). We report here solution fabricated polymer brush gate insulators with good uniformity, low surface roughness and high capacitance. These ultra thin polymer films, synthesized by atom transfer radical polymerization (ATRP), were used to fabricate low voltage OFETs with both evaporated pentacene and solution deposited poly(3‐hexylthiophene). The semiconductor‐dielectric interfaces in these systems were studied with a variety of methods including scanning force microscopy, grazing incidence X‐ray diffraction and neutron reflectometry. These studies highlighted key differences between the surfaces of brush and spun cast polymethyl methacrylate (PMMA) films.     

Flame atomic absorption spectrometric determination of trace amounts of heavy metal ions after solid phase extraction using modified sodium dodecyl sulfate coated on alumina

A sensitive and selective solid phase extraction procedure for the determination of traces of Cu(II), Zn(II), Pb(II) and Fe(III) has been developed. An alumina-sodium dodecyl sulfate (SDS) coated on with meso-phenyl bis(indolyl) methane (MPBIM) was used for preconcentration and determination of Cu(II), Zn(II), Pb(II) and Fe(III) ions by flame atomic absorption spectrometry. The analyte ions were adsorbed quantitatively on adsorbent due to their complexation with MPBIM. Adsorbed metals were quantitatively eluted using 6 mL of 4 mol L⁻¹ nitric acid. The effects of parameters such as pH, amount of alumina, amount of MBITP, flow rate, type and concentration of eluting agent were examined. The effects of interfering ions on the separation-preconcentration of analytes were also investigated. The relative standard deviation of the method was found to be less than 3.0%. The presented procedure was successfully applied for determination of analytes in real samples.     

A solid phase extraction procedure for Fe3+, Cu2+ and Zn2+ ions on 2-phenyl-1H-benzo[d] imidazole loaded on Triton X-100-coated polyvinyl chloride

A new and efficient solid phase extraction method is described for the preconcentration of trace heavy metal ions. The method is based on the adsorption of Fe(3+), Cu(2+) and Zn(2+) on 2-phenyl-1H-benzo[d] imidazole (PHBI) loaded on Triton X-100-coated polyvinyl chloride (PVC). The influences of the analytical parameters including pH and sample volume were investigated. Common coexisting ions did not interfere on the separation and determination of analytes under study. The adsorbed analytes were desorbed by using 5 mL of 4 mol L(-1) nitric acid. The preconcentration factor is 90. The detection limits (3 sigma) were in the range of 0.95-1 microg L(-1). The sorbent exhibited excellent stability and its sorption capacity under optimum conditions has been found to be more than 2.7 mg of ions per gram of sorbent. The recoveries of analytes were generally higher than 95%. The relative standard deviations (R.S.D.s) were generally lower than 4%. The method has been successfully applied to some real samples.     

Preparation of sulfuric acid ([3-(3-silicapropyl)sulfanyl]propyl)ester: A new and recyclable catalyst for the formylation and acetylation of alcohols under heterogeneous conditions

We describe a simple and efficient procedure for the preparation of sulfuric acid ([3-(3-silicapropyl)sulfanyl]propyl)ester (3) by the reaction of 3-(thio(propy-3-yl)silica)-propanol (2) and chlorosulfonic acid in chloroform. 3-(Thio(propy-3-yl)silica)-propanol was prepared by the reaction of 3-mercaptopropylsilica (MPS) with 3-chloropropanol in refluxing toluene. This solid sulfuric acid ([3-(3-silicapropyl)sulfanyl]propyl)ester is employed as a new catalyst for the formylation of alcohols with ethyl formate under mild and heterogeneous conditions at room temperature with good to excellent yields. Also, 3 can catalyze the acetylation of various alcohols by the reaction of alcohols with ethyl acetate under reflux conditions or with acetic anhydride at room temperature.     

Preparation of Silica-Based Ionic Liquid an Efficient and Recyclable Catalyst for One-Pot Synthesis of α-Aminonitriles

Abstract  

Preparation of N-(3-silicapropyl) imidazolium hydrogen sulfate ([Sipim]HSO₄) as a heterogeneous acidic ionic liquid is described. This heterogeneous ionic liquid was used as catalyst for the synthesis of α-aminonitriles by a one-pot condensation of aldehydes, amines, and trimethylsilyl cyanide at room temperature. Catalyst could be recycled for several times without any additional treatment.