Simultaneous measurement of temperature and strain with long period grating pairs using low resolution detection

An investigation showing the performance of compact long period grating (LPG) pairs under demanding experimental conditions, making comparisons with the use of single LPGs for the simultaneous measurement of strain and temperature is presented. In this work, a LPG pair (LPGP) sensor comprising two weak (2.5 dB each) LPGs, 13 mm apart, was compared against the performance of two single LPG sensors (LPG1 & LPG2) with coupling strengths of 2.5 dB and 12.5 dB, respectively. All the LPG sensors used were subjected to extreme conditions arising from the fabrication, by choosing a high amplitude mask period with short physical length LPGs, and the high temperature annealing processes. In addition, a low resolution detection instrument was used to capture the spectra under study. Results have shown that the LPGP is 40 times better than the first single LPG used (LPG1) and three times better than the second LPG (LPG2). Using the error analysis methodology of Brady et al., the temperature and strain errors due to the uncertainty of the wavelength measurement for each of the LPG1, LPG2, and LPGP were compared with the typical performance of various fibre Bragg grating (FBG)-based sensor schemes under similar testing conditions. It was found that LPGPs offer the best performance especially when using low resolution detection instrumentation.     

The provision of online public goods: Examining social structure in an electronic network of practice

Electronic networks of practice are computer-mediated social spaces where individuals working on similar problems self-organize to help each other and share knowledge, advice, and perspectives about their occupational practice or common interests. These interactions occur through message postings to produce an on-line public good of knowledge, where all participants in the network can then access this knowledge, regardless of their active participation in the network. Using theories and concepts of collective action and public goods, five hypotheses are developed regarding the structural and social characteristics that support the online provision and maintenance of knowledge in an electronic network of practice. Using social network analysis, we examine the structure of message contributions that produce and sustain the public good. We then combine the results from network analysis with survey results to examine the underlying pattern of exchange, the role of the critical mass, the quality of the ties sustaining participation, the heterogeneity of resources and interests of participants, and changes in membership that impact the structural characteristics of the network. Our results suggest that the electronic network of practice chosen for this study is sustained through generalized exchange, is supported by a critical mass of active members, and that members develop strong ties with the community as a whole rather than develop interpersonal relationships. Knowledge contribution is significantly related to an individual's tenure in the occupation, expertise, availability of local resources and a desire to enhance one's reputation, and those in the critical mass are primarily responsible for creating and sustaining the public good of knowledge. Finally, we find that this structure of generalized exchange is stable over time although there is a high proportion of member churn in the network.     

Exposure of Mice to Thirdhand Smoke Modulates In Vitro and In Vivo Platelet Responses

Smoking is a risk factor for a variety of deleterious conditions, such as cancer, respiratory disease and cardiovascular disease. Thrombosis is an important and common aspect of several cardiovascular disease states, whose risk is known to be increased by both first- and secondhand smoke. More recently, the residual cigarette smoke that persists after someone has smoked (referred to as thirdhand smoke or THS) has been gaining more attention, since it has been shown that it also negatively affects health. Indeed, we have previously shown that 6-month exposure to THS increases the risk of thrombogenesis. However, neither the time-dependence of THS-induced thrombus formation, nor its sex dependence have been investigated. Thus, in the present study, we investigated these issues in the context of a shorter exposure to THS, specifically 3 months, in male and female mice. We show that the platelets from 3-month THS-exposed mice exhibited enhanced activation by agonists. Moreover, we also show that mice of both sexes exposed to THS have decreased tail bleeding as well as decreased thrombus occlusion time. In terms of the role of sex, intersex disparities in thrombus development and hemostasis as well as in platelet aggregation were, interestingly, observed. Together, our findings show that exposing mice to THS for 3 months is sufficient to predispose them to thrombosis; which seems to be driven, at least in part, by an increased activity in platelets, and that it does not manifest equally in both sexes.     

Geometrical approach of planar hyper-redundant manipulators: Inverse kinematics,path planning and workspace

A new method for inverse kinematics for hyper-redundant manipulators is proposed in this paper to plan the path of the end-effector. The basic idea is that for a given smooth path consisting of points close enough to each other; computing the inverse kinematics for these points is carried out geometrically using the proposed method. In this method, the angles between the adjacent links are set to be the same, which makes lining up of two or more joint axes impossible; therefore, avoiding singularities. The manipulability index has been used to show how far the manipulator from the singularity configuration is. The determination of the workspace of the manipulator using the proposed method has been presented in this paper. The simulation results have been carried out on a planar and a three dimensional manipulators. The effectiveness of the proposed method is clearly demonstrated by comparing its result with results calculated by the well-known method of measuring manipulability which is used for singularity avoidance for the last two decades.     

Partial replacement of sodium chloride with potassium chloride in marinated rabbit meat

This study was aimed at evaluating the consequences of sodium chloride reduction by potassium chloride up to 50% on technological, sensorial and microbiological traits of marinated rabbit meat. In total, 226 rabbit loin meat samples were obtained and subjected to vacuum tumbling using solutions with different NaCl/KCl ratios. Replacing of sodium chloride up to 30% by potassium chloride did not change microbiological traits (total aerobic mesophilic and lactic acid bacteria maximum cell loads), sensorial acceptability (perceived saltiness and overall liking) and technological traits (pH, colour, texture, cooking loss and yield). Otherwise, reduction in sodium chloride to 50% significantly decreased perceived saltiness (4.15 vs. 4.73; P < 0.05) and reduced microbial shelf life by 1 day when compared to control, even if there was still no effect on technological traits. In conclusion, it is feasible imparting an added value for processed rabbit meat products by reduction in sodium content that could increase market interest.     

Melt spun matrix fibers of toughened polypropylene copolymers modified by high energy electrons

Binary blends of polypropylene (PP) and ethylene‐octene copolymer (EOC) are prepared by continuous electron‐induced reactive processing at various mass ratios of the blend components and various doses without adding of any grafting agents. The influence of mass ratio and dose is investigated in order to get the optimum processing behavior of toughened PP as well as optimum properties of resulting fibers. It is found that toughened PP with a PP/EOC blend ratio of 97.5–2.5  mass % can be used advantageously as a matrix component for the process of online spinning of glass fiber/toughened PP hybrid yarns. Such hybrid yarns belong to one of the most advanced production methods for the manufacturing of fiber reinforced thermoplastic composites with an increased mechanical performance. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44011.     

Investigations into the correlation of component failure rates to system supply availability in asset management methods

Liberalization has increased economic pressure on network operators, urging them to compromise between cost savings and supply reliability. In this context, the detailed and quantitative evaluation of supply reliability is gaining ever more importance—especially its application in comprehensive asset management methods. However, the large number of components especially in medium voltage distribution networks leads to high computation times for such probabilistic reliability analyses. A recent research project deals with investigations into a forecast of system supply reliability performance following a simplified methodology. Developing different forecasting methods, also several aspects of significant importance for the calculation of supply reliability in MV distribution systems in general were identified. Especially for electrical networks of a certain size, the overlapping of independent single failures, as well as complex failures play an important role. This paper presents the background of the reliability centered asset management approach as well as the general idea and different approaches to the forecasting methods in theory briefly. Following, the application on two different example networks demonstrates the approaches and the achieved results, and reveals also the relevance of overlapping and complex failures in these results.     

Hybrid Time-Cost Optimization of Nonserial Repetitive Construction Projects

Time-cost trade-off analysis represents a challenging task because the activity duration and cost have uncertainty associated with them, which should be considered when performing schedule optimization. This study proposes a hybrid technique that combines genetic algorithms (GAs) with dynamic programming to solve construction projects time-cost trade-off problems under uncertainty. The technique is formulated to apply to project schedules with repetitive nonserial subprojects that are common in the construction industry such as multiunit housing projects and retail network development projects. A generalized mathematical model is derived to account for factors affecting cost and duration relationships at both the activity and project levels. First, a genetic algorithm is utilized to find optimum and near optimum solutions from the complicated hyperplane formed by the coding system. Then, a dynamic programming procedure is utilized to search the vicinity of each of the near optima found by the GA, and converges on the global optima. The entire optimization process is conducted using a custom developed computer code. The validation and implementation of the proposed techniques is done over three axes. Mathematical correctness is validated through function optimization of test functions with known optima. Applicability to scheduling problems is validated through optimization of a 14 activity miniproject found in the literature for results comparison. Finally implementation to a case study is done over a gas station development program to produce optimum schedules and corresponding trade-off curves. Results show that genetic algorithms can be integrated with dynamic programming techniques to provide an effective means of solving for optimal project schedules in an enhanced realistic approach.     

Intergroup helping as status relations: Effects of status stability, identification, and type of help on receptivity to high-status group's help.

Integrating research on social identity processes and helping relations, the authors proposed that low-status group members who are high identifiers will be unwilling to receive help from the high-status group when status relations are perceived as unstable and help is dependency-oriented. The first experiment, a minimal group experiment, found negative reactions to help from a high-status outgroup when status relations were unstable. The 2nd and 3rd experiments, which used real groups of Israeli Arabs and Israeli Jews, replicated this finding and showed that high identifiers were less receptive to help from the high-status outgroup than low identifiers. The 4th experiment, a help-seeking experiment with real groups of competing high schools, found that the least amount of help was sought from a high-status group by high identifiers when status relations were perceived as unstable and help was dependency-oriented. Theoretical and applied implications are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)