Indium selenide microrod films: chemical bath deposition from acidic bath

Films of indium selenide was deposited onto glass and indium tin oxide coated glass substrates in acidic medium using chemical bath deposition at room temperature. Indium sulphate and sodium selenosulphate were used as precursors of In³⁺ and Se^2?, respectively. The structural, surface morphological and optical properties of the deposited films were studied. Diffractograms in structural study revealed the deposited material is In₂Se₃ films. Controlled bath conditions resulted in the evolution of the In₂Se₃ microrod-like morphology. The optical band gap of the film was found to be 1.7 eV.     

Technologies and logistics for phosphorus recovery from livestock waste

Phosphorus (P) runoff from livestock waste can trigger algal blooms that adversely affect aquatic life and human health. One strategy to mitigate this problem is to install nutrient recovery technologies that concentrate and mobilize nutrients from nutrient-rich regions to nutrient-deficient ones. We present supply chain design formulations to identify optimal types and locations for P recovery technologies. The formulations capture trade-offs in transportation costs, technology efficiency, investment/operational costs, revenue collected from different recovered products (struvite and nutrient cakes), and environmental impact. Our computational framework is used to analyze the impact of different scenarios for market prices of recovered products, recovery yields, and remediation costs. We find that transportation of waste alone (without any processing) can achieve significant reductions in environmental impact at low cost, but cannot achieve economic sustainability in the long run due to the lack of direct revenue streams. Mechanical separation technologies that recover P in the form of nutrient cakes are low-cost solutions that can achieve high environmental benefits and reduced transportation costs, but revenues are also limited due to low values of the cakes. Struvite crystallization in fluidized beds is found to be a highly attractive option under current struvite prices, but economic sustainability is strongly dependent on yield recoveries (which are currently highly uncertain).     

Complex Wavelet Structural Similarity: A New Image Similarity Index

We introduce a new measure of image similarity called the complex wavelet structural similarity (CW-SSIM) index and show its applicability as a general purpose image similarity index. The key idea behind CW-SSIM is that certain image distortions lead to consistent phase changes in the local wavelet coefficients, and that a consistent phase shift of the coefficients does not change the structural content of the image. By conducting four case studies, we have demonstrated the superiority of the CW-SSIM index against other indices (e.g., Dice, Hausdorff distance) commonly used for assessing the similarity of a given pair of images. In addition, we show that the CW-SSIM index has a number of advantages. It is robust to small rotations and translations. It provides useful comparisons even without a preprocessing image registration step, which is essential for other indices. Moreover, it is computationally less expensive.     

Corrosion inhibition of 3s aluminium in trichloroacetic acid by methyl pyridines

The effect of pyridine and its methyl derivatives on the corrosion of 3S aluminium in trichloroacetic acid was determined. The efficiency increased with increasing inhibitor concentration, and for a given concentration, with increasing electron density at the nitrogen atom. The mechanism of inhibition is discussed.     

Korrosion von Aluminium in Salzgemischen und Korrosionseinfluß von Kupferionen

Corrosion of aluminium in mixtures of salts and effect of copper ions Corrosion of aluminium has been studied in stagnant condition, in mixtures of salts, NaCl + NaHCO₃, Na₂CO₃ + NaHCO₃ and NaCl + Na₂CO₃; effect of addition of copper ions has also been studied. It has been found that (shallow) pits are formed only when both chloride and bicarbonate are present. Addition of copper ions occasionally increases the numbers of pits but may some times decrease corrosion.     

Novel solid hypergolic fuels for hybrid propellants

A new class of compounds, viz., monothiocarbohydrazones, have been found to be hypergolic with anhydrous and red fuming nitric acids. A study of the ignition delays of the various thiocarbohydrazonenitric acid systems as a function of particle size and fuel/oxidizer ratio reveals no significant effect by these parameters. The observed ignition delays have been explained in terms of the chemical reactivity and structure of these compounds.     

DC Electrical Resistivity and Magnetic Property of Single-Phase α-Fe2O3 Nanopowder Synthesized by a Simple Chemical Method

Nanocrystalline pure α-Fe₂O₃ powder, with an average particle size of 35 nm, has been synthesized by using an aqueous solution-based synthetic route. DC electrical resistivity of the synthesized material was measured with respect to temperature by the two-probe method from 28° to 225°C. Room temperature resistivity of the nanopowder was ∼10⁸Ω·cm. Magnetic hysteresis measurement revealed that the synthesized α-Fe₂O₃ nanopowder exhibited ferromagnetic behavior at room temperature. The hysteretic features are high saturation magnetization of 5.1 emu/g, high remanence of 2.2 emu/g, and coercivity of 200.5 Oe.     

Computational studies of flow through cross flow fans - effect of blade geometry

Introduction Cross Flow Fan (CFF) is a turbomachine, which operates fundamentally in a different way compared to axial or centrifugal type of machines. Flow enters the full width of impeller through one sector and leaves through another sector. The flow structure inside the impeller can be divided into two regions: (a) eccentric vortex or recirculation region having closed streamlines (b) through flow region consisting of inflow and outflow of the fluid. The main components of CFF are imp…     

Synthesis,characterization, and properties of flexible magnetic nanocomposites of cobalt ferrite–polybenzoxazine–linear low‐density polyethylene

A simple method for the preparation of magnetic nanocomposites consisting of cobalt ferrite (CF; CoFe₂O₄) nanoparticles, polybenzoxazine (PB), linear low‐density polyethylene (LLDPE), and linear low‐density polyethylene‐g‐maleic anhydride (LgM) is described. The composites were prepared by the formation of benzoxazine (BA)–CF nanopowders followed by melt blending with LLDPE and the thermal curing of BA. The composites were characterized by X‐ray diffraction, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, universal testing machine measurement, and vibrating sample magnetometry. The composites consisting of LLDPE, PB, and LgM (47.5L–47.5PB–5LgM) exhibited a higher tensile strength (23.82 MPa) than pure LLDPE and a greater elongation at break (6.11%) than pure PB. The tensile strength of the composites decreased from 19.92 to 18.55 MPa with increasing CF loading (from 14.25 to 33.25 wt %). The saturation magnetization of the composites containing 33.25 wt % CF was 18.28 emu/g, and it decreased with decreasing amount of CF in the composite. The composite films exhibited mechanical flexibility and magnetic properties. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013