Large Area Self-Assembled Ultrathin Polyimine Nanofilms Formed at the Liquid–Liquid Interface Used for Molecular Separation

Separation membranes with higher molecular weight cut-offs are needed to separate ions and small molecules from a mixed feed. The molecular sieving phenomenon can be utilized to separate smaller species with well-defined dimensions from a mixture. Here, the formation of freestanding polyimine nanofilms with thicknesses down to ≈14 nm synthesized via self-assembly of pre-synthesized imine oligomers is reported. Nanofilms are fabricated at the water–xylene interface followed by reversible condensation of polymerization according to the Pieranski theory. Polyimine nanofilm composite membranes are made via transferring the freestanding nanofilm onto ultrafiltration supports. High water permeance of 49.5 L m^-2 h⁻¹ bar⁻¹ is achieved with a complete rejection of brilliant blue-R (BBR; molecular weight = 825 g mol⁻¹) and no more than 10% rejection of monovalent and divalent salts. However, for a mixed feed of BBR dye and monovalent salt, the salt rejection is increased to ≈18%. Membranes are also capable of separating small dyes (e.g., methyl orange; MO; molecular weight = 327 g mol⁻¹) from a mixed feed of BBR and MO. Considering a thickness of ≈14 nm and its separation efficiency, the present membrane has significance in separation processes.     

Adaptive cell division for ray tracing

In ray tracing the two most commonly used data structures are the octree and uniform cell division. The octree structure allows efficient adaptive subdivision of space, while taking care of the spatial coherence of the objects in it; however, the tree structure locating the next node in the path of a ray is complex and time consuming. The cell structure, on the other hand, can be stored in a three-dimensional array, and each cell can be efficiently accessed by specifying three indices. However, such a uniform cell division does not take care of object coherence. The proposed data structure combines the positive features of the above data structures while minimising their disadvantages. The entire object space is implicitly assumed to be a three-dimensional grid of cells. Initially, the entire object space is a single voxel which later undergoes “adaptive cell division.” But, unlike in the octree structure, where each voxel is divided exactly at the middle of each dimension, in adaptive cell division, each voxel is divided at the nearest cell boundary. The result is that each voxel contains an integral number of cells along each axis. Corresponding to the implicit cell division we maintain a three-dimensional array, with each array element containing the voxel number which is used to index into the voxel array. The voxel array is used to store information about the structure of each voxel, in particular, the objects in each voxel. While a ray moves from one voxel to another we always keep track of the cell through which the ray is currently passing. Since only arrays are involved in accessing the next voxel in the path of the ray, the operation is very efficient.     

适合消费电子产品的电流转换逻辑技术

消费电子和通信产业正见证着I／O解决方案从并行到高速串行的转变：能够降低成本、简化设计，并具备可延展性，满足全新带宽的要求。这类接口I／O技术的市场潜力巨大，包括移动电话、DVD-RW和高清晰度LCD电视机，而低功耗、低电磁干扰(EMI)和高数据吞吐量在这些应用中极为重要。因此，业界一直致力于设计和开发这些串行I／O，以低功耗提供高速的数据速     

Heat Transfer Analysis for Gas-to-Liquids Transportation Through Trans Alaska Pipeline

Gas-to-liquids (GTL) technology involves the conversion of natural gas to liquid hydrocarbons. In this article, theoretical studies have been presented to determine the feasibility of transporting GTL products through the Trans-Alaska Pipeline System (TAPS). To successfully transport GTL through TAPS, heat loss along the route must be carefully determined. This study presents heat transfer and fluid dynamic calculations to evaluate this feasibility. Because of heat loss, the fluid temperature decreases in the direction of flow and this affects the fluid properties, which in turn influence convection coefficient and pumping power requirements. The temperature and heat loss distribution along the pipeline at different locations have been calculated. Fairly good agreement with measured oil temperatures is observed. The powers required to pump crude oil and GTL individually, against various losses have been calculated. Two GTL transportation modes have been considered; one as a pure stream of GTL and the second as a commingled mixture with crude oil. These results show that the pumping power and heat loss for GTL are less than that of the crude oil for the same volumetric flow rate. Therefore, GTL can be transported through TAPS using existing equipment at pump stations.     

A genetic‐based neuro‐fuzzy controller for blind equalization of time‐varying channels

This paper presents a neuro‐fuzzy network (NFN) where all its parameters can be tuned simultaneously using genetic algorithms (GAs). The approach combines the merits of fuzzy logic theory, neural networks and GAs. The proposed NFN does not require a priori knowledge about the system and eliminates the need for complicated design steps such as manual tuning of input–output membership functions, and selection of fuzzy rule base. Although, only conventional GAs have been used, convergence results are very encouraging. A well‐known numerical example derived from literature is used to evaluate and compare the performance of the network with other equalizing approaches. Simulation results show that the proposed neuro‐fuzzy controller, all parameters of which have been tuned simultaneously using GAs, offers advantages over existing equalizers and has improved performance. From the perspective of application and implementation, this paper is very interesting as it provides a new method for performing blind equalization. The main contribution of this paper is the use of learning algorithms to train a feed‐forward neural network for M‐ary QAM and PSK signals. This paper also provides a platform for researchers of the area for further development. Copyright © 2008 John Wiley & Sons, Ltd.     

Nano-octopus: a new form of branching carbon nanofiber

A new multibranched octopus-type structure of carbon nanofibers is synthesized from a natural precursor, camphor, by a thermal chemical vapor deposition technique. An alloy of Cu:Ni catalyst is prepared by electrochemically coating nickel on a copper sheet, with nickel sulfate as an electrolyte, and heating that nickel-coated copper sheet to a higher temperature. Deposition of carbon on these substrates leads to the formation of a branched nanostructure in the temperature range of 923 K to 1023 K. The fiber diameter increases from 30 nm to 250 nm with increasing pyrolysis temperature. Detailed morphology and the internal structure of these fibers are studied by scanning and transmission electron microscopy.     

Multiple exemplar-based facial image retrieval using independent component analysis.

In this paper, we design a content-based image retrieval system where multiple query examples can be used to indicate the need to retrieve not only images similar to the individual examples, but also those images which actually represent a combination of the content of query images. We propose a scheme for representing content of an image as a combination of features from multiple examples. This scheme is exploited for developing a multiple example-based retrieval engine. We have explored the use of machine learning techniques for generating the most appropriate feature combination scheme for a given class of images. The combination scheme can be used for developing purposive query engines for specialized image databases. Here, we have considered facial image databases. The effectiveness of the image retrieval system is experimentally demonstrated on different databases.     

Handover scheme for mobile cellular communication systems

A new scheme for minimising handover failure probability in mobile cellular communication systems, by exchanging channels between two mobiles moving in opposite directions across the endeavour area of adjacent cells is presented. The performance evaluation of the new scheme is carried out by computer simulation of a two cell model