Second harmonic generation from a ferroelectric film

We derive an expression for transmittivity (T_SHG) of second harmonic generation (SHG) signals from a ferroelectric (FE) film. Intensities of up and down fields in the medium are investigated in relation to T_SHG. The derivations are made based on undepletion of input fields and nonlinear wave equation derived from the Maxwell equations. We present two cases: film without mirrors and with partial mirrors. Expressions for the newly derived nonlinear susceptibility coefficients of SHG for real crystal symmetry [J. Opt. Soc. Am. B 19 (2002) 2007] are used to get more realistic results. Variations in T_SHG with respect to film thickness are illustrated.     

Removal of endocrine disrupting chemicals (EDCs) using low pressure reverse osmosis membrane (LPROM).

Endocrine disrupting chemicals (EDCs) are the focus of current environmental issues, as they can cause adverse health effects to animals and human, subsequent to endocrine function. The objective of this study was to remove a specific compound of EDCs (i.e. pentachlorophenol, C(6)OCL(5)Na, molecular weight of 288 g/mol) using low pressure reverse osmosis membrane (LPROM). A cross flow module of LPROM was used to observe the effects of operating parameters, i.e. pH, operating pressure and temperature. The design of the experiment was based on MINITAB(TM) software, and the analysis of results was conducted by factorial analysis. It was found that the rejection of pentachlorophenol was higher than 80% at a recovery rate of 60 to 70%. The rejection was subjected to increase with the increase of pH. The flux was observed to be increased with the increase of operating pressure and temperature. This study also investigated the interaction effects between operating parameters involved.     

Fluorescence in situ hybridization of three oncogenes on a leiomyoma

Using fluorescence in situ hybridization technique, expression of three oncogenes, C-myc, RARa, and cyclin-D was tested on a uterine leiomyoma. C-myc and RARa were amplified in approximately 30% and 90% of the cells, respectively. Numerous small signals of C-myc were indicative of the presence of double minutes. Amplification of RARa is being reported for the first time in a leiomyoma. Cyclin-D was normal in diploid cells while it was highly amplified in polyploid cells. Low levels of amplified C-myc and cyclin-D cells seem to be the reason for this tumor to be benign, while RARa could not be effective without the association of some other gene such as PML. Information presented here are significant toward developing new curative strategies such as gene-specific drugs and molecular manipulation to stop the activity of cancer gene. Further study may elucidate that how fibroids grow and maintain their rare benign nature.     

A novel silver–aluminium high-temperature die attach nanopaste system: the effects of organic additives content on post-sintered attributes

An Ag–Al die attach material having a fixed Ag–Al nanoparticles weight percent content (80–20 %), as well as varying organic additives weight percent content was formulated. The total nanoparticle weight percent content was varied between 84.7 and 87.0 %. As the organic additives content in the Ag₈₀–Al₂₀ die attach material decreased from 15.3 to 13.0 %, the nanopaste’s viscosity increased. The die attach material was sintered at 380 °C for 30 min to form Ag₂Al and Ag₃Al compounds. With decreasing organics content from 15.3 to 13.0 %, the porosity of the post-sintered samples also decreased from 30 to 19 %, while the density increased from 2.36 to 6.42 g/cm³. The highest melting point was recorded for the sample with the least organic weight percent content at 519 °C. The coefficient of thermal expansion and electrical conductivity values varied between 6.99–7.74 × 10^?6/ °C and 0.95–1.01 × 10⁵ (ohm-cm)^?1 respectively with decreasing organic content from 15.3 to 13.0 %. The electrical conductivity values recorded were higher than or equal to that of most solder alloy die attach materials. By changing the organic additives content in the Ag₈₀–Al₂₀ die attach material, suitable properties are obtained for high temperature die attach applications.     

Cardiovascular disease research in Saudi Arabia: a bibliometric analysis

In the previous three decades, in Saudi Arabia, prevalence of cardiovascular diseases (CVD) has increased and the government has invested significantly in education, healthcare, and research. This study examined the research productivity trends and characterized the types and focus of the all CVD research studies from Saudi Arabia. Data were extracted from studies published up until December 2015 and indexed in the PubMed database. Study eligibility criteria included: (1) sample selected within Saudi Arabia, and (2) CVD or a risk factor for CVD as an outcome, or (3) patients with CVD as study participants. Bibliometric data and study characteristics were extracted from each study; examples include authorship (number, gender, affiliation), journal, publication year, study location, research design, sample size, sample type (general or patient), sample composition (male or female), and sampling strategy (random or non-random). Analysis included 295 studies that pertained to 19 types of CVD; the most common were coronary artery disease (18%), hypertension (16%), stroke (14%), peripheral artery disease (11%), and congenital heart disease (10%). In the past 30 years, the overall productivity, use of a hypothesis-testing design (i.e. case–control, cohort, or trial), international collaborations, and funding increased incrementally. The experimental design constituted only 3% of all studies and less than 10% of the hypothesis-testing design studies. The scientific literature from Saudi Arabia addressed many of the CVD types. However, there were very few experimental studies conducted to date. Funding agencies should consider patronizing more studies with a hypothesis-testing design.     

Characterization and mechanical properties of exfoliated graphite nanoplatelets reinforced polyethylene terephthalate/polypropylene composites

Recently, graphene and its derivatives have been used to develop polymer composites with improved or multifunctional properties. Exfoliated graphite nanoplatelets (GNP) reinforced composite materials based on blend of polyethylene terephthalate (PET), and polypropylene (PP) compatibilized with styrene–ethylene–butylene–styrene‐g‐maleic anhydride is prepared by melt extrusion followed by injection molding. Characterization of the composites' microstructure and morphology was conducted using field emission scanning electron microscopy, transmission electron microscopy (TEM), X‐ray diffraction analysis (XRD), and Fourier transform infrared spectroscopy (FTIR). Tensile and impact strengths of test specimens were evaluated and the results showed maximum values at 3phr GNP in both the cases. Morphological studies showed that the GNPs were uniformly dispersed within the matrix. Results from XRD analysis showed uniformly dispersed GNPs, which may not have been substantially exfoliated. FTIR spectroscopy did not show any significant change in the peak positions to suggest definitive chemical interaction between GNP and the matrix. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40582.     

Immobilization of lipase on poly(N-vinyl-2-pyrrolidone-co-2-hydroxyethyl methacrylate) hydrogel for the synthesis of butyl oleate

Lipase from Candida rugosa was immobilized by entrapment on poly(N-vinyl-2-pyrrolidone-co-2-hydroxyethyl methacrylate) [poly(VP-co-HEMA)] hydrogel, cross-linked with ethylene glycol dimethacrylate (EDMA). The immobilized enzyme was used in the esterification of oleic acid with butanol in hexane. The activities of the immobilized enzyme preparations and the leaching of the enzyme from the hydrogel supports with respect to composition were investigated. The thermal, solvent, and storage stability of the immobilized preparations also were determined. Increasing the percentage VP from 0 to 90, which corresponds to the increase in the hydrophilicity of the hydrogels, increased the activity of the immobilized enzyme. Lipase immobilized onto VP(%):HEMA(%), 90:10 hydrogel had the highest activity. Increasing the hydrophobicity of the hydrogel (increasing the percentage HEMA) seemed to decrease leaching of the enzyme from the support. Immobilized lipase on 100% HEMA hydrogel indicated highest entrapment and lowest leaching by hexane washing. The lipase immobilized on VP(%):HEMA(%), 50:50 hydrogel showed highest thermal, solvent, and storage stability compared to lipase immobilized on other hydrogel compositions as well as the native lipase.     

Synthesis of medium-chain glycerides using lipase from Candida rugosa

Enzymatic synthesis of medium-chain glycerides (MCG) from capric acid and glycerol was studied using lipase from Candida rugosa. The effects of various reaction parameters such as time, molar ratio of substrates (mmol capric acid/mmol glycerol), amount of lipase, type of organic solvents, and initial water activity (a _w ) were studied. The best conditions tested for MCG synthesis at 37°C were, respectively, time, 24 h; molar ratio of substrates, 2.5; and amount of lipase, 100.0 mg. The use of organic solvents greatly influenced the activity of lipase in the synthesis of MCG. Generally, activity of lipase was high in nonpolar solvents with log P values from 3.50 to 4.50, where P is the partition coefficient between water and 1-octanol. The enzymatic synthesis of MCG was preferably carried out at an initial a _w of 0.328, which resulted in maximal yield. Analysis of the products of reaction using gas chromatography showed that lipase from Candida rugosa seemed to produce more dicaprin and tricaprin than monocaprin.