排序方式: 共有38条查询结果,搜索用时 0 毫秒
1.
This article presents a metamodeling study for Live Sequence Charts (LSCs) and Message Sequence Charts (MSCs) with an emphasis
on code generation. The article discusses specifically the following points: the approach to building a metamodel for MSCs
and LSCs, a metamodel extension from MSC to LSC, support for model-based code generation, and finally action model and domain-specific
data model integration. The metamodel is formulated in metaGME, the metamodel language for the Generic Modeling Environment.
相似文献
Halit OğuztüzünEmail: |
2.
This paper addresses the problem of automated code generation for a High Level Architecture compliant federate application given its behavior model. The behavior model is a part of the architectural model of a federation that the federate can participate in. The federate behavior model is based on Live Sequence Charts, adopted as the behavioral specification formalism in the Federation Architecture Metamodel (FAMM). FAMM serves as a formal language for describing federation architectures. An objective is to help the testing of federation architecture by means of its prototype implementation early in the development lifecycle. A further objective is to help developers construct complete federate applications that are well modularized. The approach to achieve these objectives is aspect‐oriented in that the generated code, which handles the federate's interactions with a federation execution, serves as the base code, where the computation logic is to be weaved as an aspect. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
3.
4.
M. Adak C. Guedes Soares 《The International Journal of Advanced Manufacturing Technology》2014,71(1-4):699-710
Effects of three different plate boundary constraints on the residual stress field and deformation are investigated numerically during butt-joint welding. For the numerical solution of the heat transfer equations, the finite element method is used to predict the temperature profile as well as residual stress field due to three different plate boundary conditions. The distortion of the welded plate is modeled as a nonlinear problem in geometry and material, adopting a finite element solution based upon the thermo–elastic–plastic large deflection theory. High-strength shipbuilding steel AH36 with temperature-depending material properties and nonlinear stress–strain material properties (bilinear isotropic hardening option uses the von Mises yield criteria) are assumed for the numerical analysis. For verifying the results, the temperature profile is compared with the result obtained in a previous research. In the mechanical analysis, three different boundary conditions are applied. Effects of plate thickness, plate width, and mesh model on the residual stress with boundary constraint are studied. 相似文献
5.
Enhancement of DNA vaccine immunogenicity is a current topic of high priority in the field of applied immunology, especially as a means of controlling HIV infection. The adjuvant effect of Ubenimex (UBX), an anti-cancer immunomodulator, on a DNA AIDS vaccine which we developed was examined in a murine model. UBX was formulated into a preparation containing DNA plasmids encoding env and rev genes of HIV-1 strain III(B), and was inoculated intramuscularly into BALB/c mice. The sera obtained with this mixture had 2(3)-2(5) times higher specific IgG titres than those obtained without the use of the adjuvant. UBX also elicited both a stronger HIV-1-specific DTH reaction, as measured by the footpad swelling test, and stronger cytotoxic T lymphocyte activity, as assayed by the 51Cr-release method, compared with responses using DNA alone. The cytokine secretion profile of restimulated immune lymphoid cells showed that UBX raised IL-2 and interferon-gamma levels and decreased IL-4 production. HIV-1-specific immunoglobulin subtype analysis demonstrated that UBX stimulated IgG2a production but suppressed synthesis of IgG1 and IgE. These results indicate that activation of the T-helper type 1 subset was induced by UBX, suggesting a mechanism of immunomodulation mediated by this agent. We conclude that UBX acts as an immunologic adjuvant for DNA vaccination against HIV-1. UBX may be a suitable adjuvant for clinical use because of its lack of antigenicity and low toxicity. 相似文献
6.
Polyurethane/clay nanocomposites with improved helium gas barrier and mechanical properties: Direct versus master‐batch melt mixing route
下载免费PDF全文
![点击此处可从《应用聚合物科学杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Thermoplastic polyurethane (TPU)/clay nanocomposite films were produced by incorporation of organo‐modified montmorillonite clay (Cloisite 30B) in TPU matrix by two different melt‐mixing routes (direct and master‐batch‐based mixing), followed by compression molding. In master‐batch mixing where the master‐batch was prepared by mixing of clay and TPU in a solvent, better dispersion of clay‐layers was observed in comparison to the nanocomposites produced by direct mixing. As a consequence, superior mechanical and gas barrier properties were obtained by master‐batch mixing route. The master‐batch processing resulted in 284 and 236% increase in tearing strength and tearing energy, respectively, with 5 wt % clay‐loading. Interestingly, in case of master‐batch mixing, the tensile strength, stiffness as well as breaking extension increased simultaneously up to 3 wt % clay‐loading. The helium gas permeability reduced by about 39 and 31% for the TPU/clay nanocomposites produced by mater‐batch and direct mixing routes, respectively, at 3 wt % loading of clay. Finally, the gas permeability results have been compared using three different gas permeability models and a good correlation was observed at lower volume fraction of clay. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46422. 相似文献
7.
Debasish?SarkarEmail author Deepak?Mohapatra Sambarta?Ray Santanu?Bhattacharyya Sukumar?Adak Niren?Mitra 《Journal of Materials Science》2007,42(5):1847-1855
Al2O3–ZrO2 composite gel powder was prepared by sol–gel route. The gel precursor compositions were preferred to achieve yield of 5–15 mol%
zirconia after calcination of respective powders. The precursor gel was characterized by Differential Thermal Analysis (DTA)/Thermo
Gravimetric (TG), IR and X-ray Diffraction study (XRD). The analysis reveal the gel contained pseudoboehmite and amorphous
Zr(OH)4, which was decomposed in three and two stages respectively. The phase transformation of alumina during calcination followed
the sequence of pseudoboehmite → bayerite → boehmite → γ-Al2O3 → θ-Al2O3 → α-Al2O3, while that of ZrO2 follows amorphous ZrO2 → t-ZrO2 → (t + m) ZrO2. Fourier Transform Infrared Spectroscopy (FTIR) studies showed that the number of M–OH and M–O bond increases with zirconia
due to a change in the cationic charge of the composite powder. Transmission Electron Microscopy (TEM) photograph of calcined
powder exhibited the presence of dispersed as well as agglomerated nano sized spherical particles. SEM and Electron Probe
Microscope Analysis (EPMA) confirmed the near uniform distribution of zirconia particles in the alumina matrix. 相似文献
8.
Fine samples with nominal composition of Bi1·6Pb0·4Sr2Ca2Cu3O
x
have been produced by solid state method using various purity grades of starting copper oxide powder. Studies onT
c and high-T
c volume fraction measurements of these samples revealed that the samples produced using CuO powders obtained in laboratory
after double purification of the commercially available copper salts have higherT
c (104·46 K) and increased percentage of highT
c volume fraction (58%) compared to even the samples prepared from Aldrich grade (99·99%) CuO. A simple and cost-effective
chemical route for the purification of CuO from commercially available copper salts has been outlined. 相似文献
9.
Development of nano carbon containing magnesia carbon refractories has been studied to reduce the total carbon content, thereby reducing the heat loss from the metallurgical process and producing more eco-friendly refractories. The carbon contamination from refractory to liquid metal will be minimized using low amount of nano carbon. Different percentages of nano carbon are used in combination with graphite as carbon source and the total carbon is maintained below the half of the total carbon of the conventional MgO-C refractories. The compositions were processed as per the conventional manufacturing techniques and the properties were evaluated and compared against the conventional refractory prepared under exactly similar conditions. Also elemental mapping of carbon was done to study the distribution of the nano carbon in the matrix. 相似文献
10.
Microstructural evolution and grain growth in 3Y–TZP ceramics have been examined using two nano-sized 3Y–TZP powders, calcined at different temperatures, derived from the same hydroxide powder. The green bodies prepared from both powders showed two sets of porosity: inter-agglomerate and intra-agglomerate. The intra-agglomerate pores are related to initial crystallite size; the size of the inter-agglomerate pores are governed by the pressure applied to the green bodies. Due to the nano-sized dimensions, the intra-agglomerate porosity has little effect on the final density and grain size. In contrast, the large inter-agglomerate pores play a major role on both the sintering process and achievement of final density. During sintering, the grains initially grew to approximately 100 nm, reaching the intermediate stage of sintering; the grain growth rate then became very much reduced before reaching the final stage of the sintering process. At this point, significant grain growth took place, possibly controlled by the solution drag mechanism. The activation energy for the grain growth was determined to be 352 kJ/mol. 相似文献