Triangularly weighted zero-crossing detector providingΣΔ frequency-to-digital conversion

It is shown that for delta-sigma (ΣΔ) frequency-to-digital conversion (FDC) there is no need for a ΣΔ modulator, since a limited FM signal itself may be considered as an asynchronous ΣΔ bit-stream. By feeding the limited FM signal directly to a sinc² ΣΔ decimator, a triangularly weighted zero-crossing counter FDC is introduced, providing ΣΔ noise shaping. The results measured confirm the theory     

The influence of different single dietary sources on moult induction in laying hens

An investigation was carried out to assess the possibility of using single dietary sources as alternatives to feed deprivation for the induction of moult in commercial laying hens. The study involved six dietary groups of 29 laying hens: unmoulted, dried tomato pomace, alfalfa meal, rice bran, cumin seed meal and feed withdrawal. The birds received the above diets during the moulting period (11 days), and body weight loss and ovary weight regression were measured. Post‐moult production parameters (number of eggs produced per hen per day, egg weight, shell weight, yolk colour and Haugh unit) were measured for 12 weeks. Results showed that all dietary sources were as effective as feed withdrawal in causing ovary weight regression in birds. Birds provided with tomato pomace or alfalfa showed lower weight losses than feed‐deprived birds at the end of the moulting period. Hens moulted by tomato pomace or alfalfa exhibited post‐moult levels of egg production over a 12 week period that were superior to those of hens moulted by feed withdrawal. Post‐moult eggs laid by hens moulted by all dietary sources were of comparable quality to eggs from feed‐deprived hens and superior to those from unmoulted hens. As fibrous feeds with low metabolisable energy and an appreciable amount of protein, dried tomato pomace and alfalfa meal may be fed to hens on an ad libitum basis for effective moult induction while reducing the stress of severe starvation and retaining comparable egg quality and production. Copyright © 2007 Society of Chemical Industry     

Equalization for discrete multitone transceivers to maximize bitrate

In a discrete multitone receiver, a time-domain equalizer (TEQ) reduces the intersymbol interference (ISI) by shortening the effective duration of the channel impulse response. Current TEQ design methods such as the minimum mean-squared error (MMSE), maximum shortening SNR (MSSNR), and maximum geometric SNR (MGSNR) do not directly maximize bit rate. We develop two TEQ design methods to maximize the bit rate. First, we partition an equalized multicarrier channel into its equivalent signal, noise, and ISI paths to develop a new subchannel SNR definition. Then, we derive a nonlinear function of TEQ taps that measures the bit rate, which the proposed maximum bit rate (MBR) method optimizes. We also propose a minimum-ISI method that generalizes the MSSNR method by weighting the ISI in the frequency domain to obtain higher performance. The minimum-ISI method is amenable to real-time implementation on a fixed-point digital signal processor. Based on simulations using eight different carrier-serving-area loop channels, (1) the proposed methods yield higher bit rates than MMSE, MGSNR, and MSSNR methods; (2) the proposed methods give three-tap TEQs with higher bit rates than 17-tap MMSE, MGSNR, and MSSNR TEQs; (3) the proposed MBR method achieves the channel capacity (as computed by the matched filter bound using the proposed subchannel SNR model) with a five-tap TEQ; and (4) the proposed minimum-ISI method achieves the bit rate of the optimal MBR method     

On-line adaptive digital correction of dual-quantisation delta-sigma modulators

The authors describe the digital adaptive correction of nonidealities in dual-quantisation delta-sigma modulators. The sources and effects of nonidealities in a delta-sigma loop are discussed, and a simple on-line correction scheme is presented. The theoretical signal-to-noise ratio (SNR) improvement is calculated and simulation results are given which illustrate the effectiveness of the technique.<>     

Combined Linear and $Delta$-Modulated Switch-Mode PA Supply Modulator for Polar Transmitters

A combined linear and delta-modulated (DeltaM) switch-mode PA supply modulator for polar transmitters in wireless handsets is designed in a 0.25 mum CMOS process. The modulator employs a DeltaM switch-mode DC-DC buck converter to enhance the efficiency of a linear regulator at backed-off supply voltages and powers. The delta-modulator's noise-shaping characteristic, linear regulator's power supply rejection, digital pre-emphasis of the input envelope, and a closed-loop amplitude path from the PA output are simultaneously used to achieve state-of-the-art modulator performance. The presented supply modulator follows the input signal's envelope with 20 dB output dynamic range, maximum efficiency of 75.5% at an output power of 30.8 dBm, and 75 dB SFDR for envelope signals up to 4 MHz occupied RF bandwidth. For a 1625 kb/s 8 PSK RF input signal at 900 MHz, polar modulation of a commercial low-power GSM-900 PA provides 10 dB ACPR improvement.     

Cumin seed meal with enzyme and polyethylene glycol as an alternative to wheat bran in broiler diets

Iran produces about 7000 metric tons of cumin seed meal (CSM) as a by‐product of cumin oil extraction factories, annually. To evaluate the nutritional significance of cumin seed meal as a broiler feedstuff, an experiment was conducted using 288 male broiler chicks (14 days old) receiving diets containing 0, 25 and 50 g kg⁻¹ of CSM with and without polyethylene glycol (PEG) and enzyme (Grindazyme^™ GP 15000) for 28 days. Total body weight (BW), body weight gain (WG), feed intake (FI), feed conversion ratio (FCR), weight of carcass and percentage of legs, breast and edible parts of carcass were measured. The results showed that, inclusion of CSM in broiler diets had no negative influence on parameters evaluated compared to the control diet containing wheat bran (P > 0.05). PEG and enzyme had no influence on the bird performance (P > 0.05). There was an increase in relative weight of gizzard when the amount of CSM in the diet was increased (P < 0.01). An increase in relative weight of gizzard in birds that received the CSM diet was likely to be due to the increase in fibre content of CSM diets. In respect of the low price of CSM, it could be concluded that inclusion of CSM at levels used in this experiment has no negative effect on broiler performance and reduces the overall cost of broiler production. Copyright © 2006 Society of Chemical Industry     

A Compact and Low-Cost MEMS Loudspeaker for Digital Hearing Aids

A microelectromechanical-systems (MEMS)-based electromagnetically actuated loudspeaker to reduce form factor, cost, and power consumption, and increase energy efficiency in hearing-aid applications is presented. The MEMS loudspeaker has multilayer copper coils, an NiFe soft magnet on a thin polyimide diaphragm, and an NdFeB permanent magnet on the perimeter. The coil impedance is measured at 1.5 Omega, and the resonant frequency of the diaphragm is located far from the audio frequency range. The device is driven by a power-scalable, 0.25-mum complementary metal-oxide semiconductor class-D SigmaDelta amplifier stage. The class-D amplifier is formed by a differential H-bridge driven by a single bit, pulse-density-modulated SigmaDelta bitstream at a 1.2-MHz clock rate. The fabricated MEMS loudspeaker generates more than 0.8-mum displacement, equivalent to 106-dB sound pressure level (SPL), with 0.13-mW power consumption. Driven by the SigmaDelta class-D amplifier, the MEMS loudspeaker achieves measured 65-dB total harmonic distortion (THD) with a measurement uncertainty of less than 10%. Energy-efficient and cost-effective advanced hearing aids would benefit from further miniaturization via MEMS technology. The results from this study appear very promising for developing a compact, mass-producible, low-power loudspeaker with sufficient sound generation for hearing-aid applications.     

Noise considerations for mixed‐signal RF IC transceivers

This paper discusses design tradeoffs for mixedsignal radio frequency integrated circuit (RF IC) transceivers for wireless applications in terms of noise, signal power, receiver linearity, and gain. During air wave transmission, the signal is corrupted by channel noise, adjacent interfering users, image signals, and multipath fading. Furthermore, the receiver corrupts the incoming signal due to RF circuit nonlinearity (intermodulation), electronic device noise, and digital switching noise. This tutorial paper gives an overview of the design tradeoffs needed to minimize RF noise in an integrated wireless transceiver. Fundamental device noise and the coupling of switching noise from digital circuits to sensitive analog sections and their impact on RF circuits such as frequency synthesizers are examined. Methods to minimize mixedsignal noise coupling and to model substrate noise effects are presented.     

A Self-Calibrated On-Chip Phase-Noise Measurement Circuit With −75 dBc Single-Tone Sensitivity at 100 kHz Offset

An on-chip clock phase-noise measurement circuit is presented. Unlike previously reported monolithic measurement techniques that measure jitter in the time domain, the proposed module measures the phase-noise spectrum. The proposed circuit is fully integrated and does not require a spectrally clean reference clock or any external calibration. The module can be integrated as part of a built-in self-test (BIST) scheme for PLL clock synthesizers. The proposed circuit uses a low-noise voltage-controlled delay-line (VCDL) and mixer-based frequency discriminator to extract the phase-noise fluctuations at baseband. A self-calibration circuit is used to operate the measurement circuit at its highest sensitivity point. The proposed circuit is fabricated using a 0.25 mum digital CMOS process and operates up to a 2 GHz carrier frequency. It achieves a single-tone measurement sensitivity of -75 dBc and an equivalent phase-noise sensitivity of -124 dBc/Hz at 100 kHz offset frequency.     

Adaptive selfcalibrating delta-sigma modulators

The concept of an adaptive Delta Sigma A/D convertor is introduced. A selfcalibrating adaptive implementation is described. The new scheme appears to be very effective for improving the resolution and the signal-to-noise ratio of delta-sigma modulators which rely on error cancellation to achieve a high signal-to-noise ratio.<>